Issue 26, 2017

Efficient quantum dot light-emitting diodes with a Zn0.85Mg0.15O interfacial modification layer

Abstract

Efficient inverted quantum-dot (QD) light-emitting diodes (LEDs) are demonstrated by using 15% Mg doped ZnO (Zn0.85Mg0.15O) as an interfacial modification layer. By doping Mg into ZnO, the conduction band level, the density of oxygen vacancies and the conductivity of the ZnO can be tuned. To suppress excess electron injection, a 13 nm Zn0.85Mg0.15O interlayer with a relatively higher conduction band edge and lower conductivity is inserted between the ZnO electron transport layer and QD light-emitting layer, which improves the balance of charge injection and blocks the non-radiative pathway. Moreover, according to the electrical and optical studies of devices and materials, quenching sites at the ZnO surface are effectively reduced by Mg-doping. Therefore exciton quenching induced by ZnO nanoparticles is largely suppressed by capping ZnO with Zn0.85Mg0.15O. Consequently, the red QLEDs with a Zn0.85Mg0.15O interfacial modification layer exhibit superior performance with a maximum current efficiency of 18.69 cd A−1 and a peak external quantum efficiency of 13.57%, which are about 1.72- and 1.74-fold higher than 10.88 cd A−1 and 7.81% of the devices without Zn0.85Mg0.15O. Similar improvements are also achieved in green QLEDs. Our results indicate that Zn0.85Mg0.15O can serve as an effective interfacial modification layer for suppressing exciton quenching and improving the charge balance of the devices.

Graphical abstract: Efficient quantum dot light-emitting diodes with a Zn0.85Mg0.15O interfacial modification layer

Supplementary files

Article information

Article type
Paper
Submitted
24 mar 2017
Accepted
03 máj 2017
First published
05 máj 2017

Nanoscale, 2017,9, 8962-8969

Efficient quantum dot light-emitting diodes with a Zn0.85Mg0.15O interfacial modification layer

Y. Sun, Y. Jiang, H. Peng, J. Wei, S. Zhang and S. Chen, Nanoscale, 2017, 9, 8962 DOI: 10.1039/C7NR02099F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements