Hiroyuki
Tamura
*ab,
Keisuke
Saito
ab and
Hiroshi
Ishikita
ab
aDepartment of Applied Chemistry, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8654, Japan. E-mail: tamura@protein.rcast.u-tokyo.ac.jp
bResearch Center for Advanced Science and Technology, The University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8904, Japan
First published on 5th May 2021
Exciton charge separation in photosynthetic reaction centers from purple bacteria (PbRC) and photosystem II (PSII) occurs exclusively along one of the two pseudo-symmetric branches (active branch) of pigment–protein complexes. The microscopic origin of unidirectional charge separation in photosynthesis remains controversial. Here we elucidate the essential factors leading to unidirectional charge separation in PbRC and PSII, using nonadiabatic quantum dynamics calculations in conjunction with time-dependent density functional theory (TDDFT) with the quantum mechanics/molecular mechanics/polarizable continuum model (QM/MM/PCM) method. This approach accounts for energetics, electronic coupling, and vibronic coupling of the pigment excited states under electrostatic interactions and polarization of whole protein environments. The calculated time constants of charge separation along the active branches of PbRC and PSII are similar to those observed in time-resolved spectroscopic experiments. In PbRC, Tyr-M210 near the accessary bacteriochlorophyll reduces the energy of the intermediate state and drastically accelerates charge separation overcoming the electron–hole interaction. Remarkably, even though both the active and inactive branches in PSII can accept excitons from light-harvesting complexes, charge separation in the inactive branch is prevented by a weak electronic coupling due to symmetry-breaking of the chlorophyll configurations. The exciton in the inactive branch in PSII can be transferred to the active branch via direct and indirect pathways. Subsequently, the ultrafast electron transfer to pheophytin in the active branch prevents exciton back transfer to the inactive branch, thereby achieving unidirectional charge separation.
Photosystem II (PSII) consists of core antenna complexes (CP43 and CP47) and a reaction center (RC).1–4 Chlorophyll a (Chl) molecules in CP43 and CP47 mediate exciton transfers to the RC consisting of Chls (PD1, PD2, ChlD1, and ChlD2), pheophytin a (PheoD1 and PheoD2), and plastoquinone (QA and QB) (Fig. 1).8–38 Charge separation occurs in the RC, where the electron reduces plastoquinone and the hole eventually oxidizes water at the Mn4CaO5 cluster.11–13 Similarly, bacteriochlorophyll a (BChl) molecules in the light harvesting complex I (LHI) from purple bacteria, Rhodobacter sphaeroides, transfer an exciton to the RC (PbRC) consisting of BChl (PL, PM, BL, and BM), bacteriopheophytin a (BPheo, HL and HM), and ubiquinone (QA and QB) (Fig. 1).11
Fig. 1 Exciton transfer5–7,9,10 and charge separation11 pathways in (a) PbRC and (b) PSII. Dashed lines indicate the rotation axis of pseudo-C2 symmetry. Blue and red arrows indicate exciton and charge transfer pathways, respectively. Phe and Tyr denote phenylalanine and tyrosine. |
Charge separation in PSII and PbRC occurs only along the active branch of the pseudo-C2 symmetric pigment–protein complexes, i.e., D1- and L-branches, respectively (Fig. 1).11 The D2- and M-branches are referred to as inactive branches. PSII and PbRC may have been evolved from a common ancestor and classified as type II RCs.11–13 In type II RCs, QB in the inactive branch accepts an electron from QA in the active branch while it does not directly accept an electron from (B) Pheo in the inactive branch (Fig. 1).
In PbRC, the strong electronic coupling between the special pair BChls, PL and PM, leads to stabilization of the delocalized exciton, (PLPM)*.11,34 The PLPM can accept an exciton from LHI, which absorbs a near infrared photon.5–7 Time-resolved spectroscopic measurements indicated that the excited electron in (PLPM)* is transferred to HLvia BL along the L-branch on a time scale of a few ps.39–50 Despite the pseudo-C2 symmetric cofactor arrangement, the difference in the amino acid sequences between the L- and M-branches leads to the difference in the redox potentials of the pigments via electrostatic interactions and polarization.51–53
A previous study using time-dependent density functional theory (TDDFT) with the quantum mechanics/molecular mechanics/polarizable continuum model (QM/MM/PCM) method indicated that the intermediate states of charge separation along the L- and M-branches, i.e., [PLPM]˙+BL˙− and [PLPM]˙+BM˙−, are lower and higher in energy than that of (PLPM)*, respectively.34
In contrast to PbRC, the excitation energies of PD1 and PD2 in PSII are higher than those of ChlD1 and ChlD2,9,34 where the exciton tends to be localized on a single pigment owing to a weak excitonic coupling. Charge separation in PSII creates a hole localized on PD1˙+, which is the nearest pigment to the Mn4CaO5 cluster located on the D1 side.54–57 The localized nature of a hole on PD1˙+ is important for PSII to keep a high oxidation potential.58
In PSII, CP43 and CP47 transfer an exciton to the RC, presumably, via the peripheral Chls on the D1 (ChlzD1) and D2 (ChlzD2) sides.3,9,10 Time-resolved spectroscopic measurements on PSII suggested that the primary electron transfer occurs from an exciton on to PheoD1 on a time scale of a few hundred fs.14,22 The hole on ChlD1˙+ is, in turn, transferred to PD1 on a time scale of a few ps.14
Because the potential for electron transfer is energetically downhill along both the D1- and D2-branches toward PheoD1 and PheoD2, respectively,33,34 the energetics alone cannot explain unidirectional charge separation in PSII. Given that both ChlD1 and ChlD2 can accept an exciton from the core antenna complexes, the mechanism that leads to charge separation exclusively along the D1-branch is of particular interest. The charge separation pathways in pigment–protein complexes can be determined by various factors including energetics, electronic coupling, vibronic coupling, and quantum effects.2–4,18–21,31,44–46
In this study, we address the long-standing open question as to how PbRC and PSII achieve unidirectional charge separation exclusively along the active branch, by means of nonadiabatic quantum dynamics calculations59–62 parametrized on the basis of TDDFT in the framework of the QM/MM/PCM method.63,64 First, we show that the experimentally observed kinetics of charge separation along the active branches of PbRC and PSII are fairly well reproduced by nonadiabatic quantum dynamics calculations, which is based on the energetics and electronic coupling of the pigments, accounting for electrostatic interactions and polarization of whole protein environments from the X-ray crystal structures. On this basis, we clarify the essential factors which regulate the charge separation pathways in the reaction centers.
The QM region comprises pigments, ligands, hydrogen bonded water, and residues which interact directly with pigments as detailed in a previous report.34 A polarizable amber-02 force field68 is applied for proteins in the MM region, where induced dipoles of the MM atoms are taken into account to reproduce the dielectric screening. The PCM with a dielectric constant of 80 is applied to reproduce the polarization of water, which surrounds the proteins and fills the cavities. The PCM in the QuanPol code is based on a conductor-like screening model,63,64 where the polarization points are put on spheres of radius 3.0 Å from the atom positions.34 All atoms from the X-ray crystal structures are explicitly considered, where each MM atom contains an induced dipole in addition to the permanent charge. The induced dipole of each MM atom is determined iteratively together with the self-consistent field calculation of electronic states, considering the electrostatic interactions with the electrons and nuclei in the QM region as well as the permanent charges and induced dipoles of other MM atoms.63 The molecular orbital levels of the cofactors calculated using QM/MM reproduce the redox potential values calculated solving the Poisson–Boltzmann equation.33,34,57,69 While the dielectric constant for the membrane region may be lower than 80 (e.g. 20),70 a small dielectric constant makes the electrostatic interactions with the charged groups in the membrane-extrinsic region overestimated for membrane proteins. The optimal values for the dielectric constant depend on the protein model used.71,72 The dielectric constant of 80 for the bulk region appears to be optimal for the present models, as suggested previously.33,34
The atomic coordinates of PSII and PbRC are obtained from the X-ray crystal structures from Thermosynechococcus vulcanus at 1.9 Å resolution (PDB code, 3ARC)73 and from Rhodobacter sphaeroides at 2.01 Å resolution (PDB code, 3I4D),74 respectively. The intramolecular reorganization energies of pigments are calculated through geometry optimization with QM/MM, where DFT with the CAMB3LYP functional plus Grimme's dispersion correction75 is used for the QM region. The atomic coordinates of the MM region are fixed to the X-ray crystal structures. The reorganization energy of the MM region is not taken into account.
The electronic coupling between excited states is evaluated on the basis of the diabatization scheme for TDDFT76 in the framework of the QM/MM/PCM method.34,77 The protocol of diabatization is summarized below.
(1) We prepare a set of reference wavefunctions, ΦI, that possess pure characters of the excited states such as an exciton on a single molecule (i.e., Frenkel exciton) and charge separated states for decoupled molecules.
(2) We calculate adiabatic electronic states in the pigment–protein complexes using TDDFT-QM/MM/PCM.
(3) The diabatic wavefunctions are expressed as a linear combination of the adiabatic wavefunctions, ΨJ, by evaluating the overlap integrals between the reference and adiabatic wavefunctions:
(1) |
That is, the adiabatic states from the TDDFT-QM/MM/PCM calculations are considered as basis functions for expanding the diabatic states. We consider 10 adiabatic states for expanding the diabatic states. The diabatic coupling is then evaluated as follows:
(2) |
For the nonadiabatic quantum dynamics calculations, we consider the following linear vibronic coupling Hamiltonian in the diabatic representation:
(3) |
(4) |
H IJ is the diabatic coupling (electronic coupling) between the states I and J. HII is the vertical excitation energy of the Ith electronic states. ωi, xi, and pi are the frequency, position, and momentum of the ith vibrational mode (harmonic oscillator) in the dimensionless coordinate. κiI is the vibronic coupling of the ith vibrational mode in the Ith electronic state.
The exciton on the special pair, (PLPM)*, is considered for the initial conditions of the quantum dynamics calculations of charge separation in PbRC. For PSII, in addition to the exciton localized on in the D1-branch, in the D2-branch is also considered for the initial conditions of the quantum dynamics calculations of charge separation. For the exciton transfer between and , the direct pathway and the indirect pathway via and are considered, where the quantum dynamics calculations account for the interference of the phase factors from several pathways. The initial vibrational wave packet is put on the Franck–Condon region of the initial electronic state.
ω i and κiI in eqn (4), i.e., spectral density, are determined on the basis of the normal mode analysis and the geometry optimization of the pigments using the QM/MM/PCM method, where the atomic displacements from the Franck–Condon region to the potential bottom on the respective electronic states are projected onto the normal modes. The present model explicitly considers the vibronic couplings of the pigments and axial ligands, which are relevant to the dynamics of charge separation on a time scale of a few ps, whereas slow vibrational modes from surrounding proteins are neglected. The vibrational modes are reduced to a limited number of effective modes which reproduce the short-time dynamics and the reorganization energy of the system (see ESI†).60–62 We consider 25 effective modes for each pigment, unless otherwise noted. For charge separation in PSII via indirect exciton transfer from to , 10 effective modes are considered for the respective intermediate states, and . The multi-configuration time-dependent Hartree (MCTDH) method59 is used for the nonadiabatic quantum dynamics calculations, which properly consider correlations among the nuclear degrees of freedom, the Franck–Condon factor of vibrational wavefunctions, and vibrational energy redistribution along with electronic state transitions.
For analyzing the time constants of the first (τ1) and second (τ2) charge transfers along the active branches, τ1 and τ2 in the following rate equations are determined via curve fitting against the populations of the exciton (PEX), and the first (PCS1) and second (PCS2) charge separated states in the quantum dynamics calculations:
(5) |
(6) |
Fig. 2 Bottom-to-bottom (adiabatic) excitation energies of the electronic states considering the intramolecular reorganization energies in (a) wild type and (b) Y(M210)F mutant PbRC. Dotted lines indicate the destabilized charge separated states in Y(M210)F mutant PbRC. Population of electronic states during quantum dynamics calculations of charge separation in (c) wild type and (d) Y(M210)F mutant PbRC, where the (PLPM)*, (PLPM)˙+BL˙−, and (PLPM)˙+HL˙− states along the L-branch are considered. Dotted lines indicate curve fitting by using eqn (5). (e) Diagram of charge transfer pathways (red lines) with electronic coupling (meV). Tyr-M210 is shown in yellow. (f) Diagram of the electron and hole locations in the (PLPM)˙+BL˙− and (PLPM)˙+HL˙− states with τ1 and τ2 (ps) for wild type PbRC (∼5 ps in total). τ1 and τ2 for the mutant PbRC are 110 and 8 ps, respectively (∼118 ps in total). |
The electronic coupling of the BL˙− → HL˙− transfer (16 meV) is stronger than that of the (PLPM)* → (PLPM)˙+BL˙− transfer (5 meV) (Fig. 2e). Thus, the population of the intermediate (PLPM)˙+BL˙− state is kept small (Fig. 2c). The fast electron transfer from BL˙− to HL is advantageous for preventing charge recombination, because (PLPM)˙+HL˙− is difficult to decay to the ground state owing to a negligibly small orbital overlap between (PLPM)˙+ and HL˙−. Charge separation along the M-branch is negligibly slow, because the intermediate (PLPM)˙+BM˙− state is substantially higher in energy than (PLPM)*, even though (PLPM)˙+HM˙− is lower in energy than (PLPM)* (Fig. 2a).
The previous time-resolved spectroscopic measurements of mutant PbRC suggested that some specific residues especially contribute to unidirectional charge separation.47–50,52 We have extensively analyzed the contribution of each residue to the potential shift on the pigments one by one, and concluded that Tyr-M210 near BL has the largest contribution to the stabilization of BL˙−,33,34 where Phe-L181 is located at the counterpart position near BM.
To verify the essential role of Tyr-M210, we consider the mutation of Tyr-M210 to phenylalanine, Y(M210)F, and investigate charge separation in the mutant PbRC by means of quantum dynamics calculations. The present TDDFT-QM/MM/PCM calculations indicate that the Y(M210)F mutation, in which the hydroxyl group is replaced with hydrogen, makes the intermediate (PLPM)˙+BL˙− state energetically uphill with respect to (PLPM)*, even though the final (PLPM)˙+HL˙− state remains downhill (Fig. 2b). The quantum dynamics calculation indicates that the destabilization of the intermediate (PLPM)˙+BL˙− state drastically slows charge separation along the L-branch through the superexchange mechanism (Fig. 2d). This trend is qualitatively consistent with the experimental observations for the mutant PbRC,47–50,52 where the calculated time constant (∼118 ps) is quantitatively larger than the experimental values (∼16 ps).47 Here, only the local geometry of Phe-M210 was optimized in QM/MM, fixing surrounding proteins at the original geometry of wild type, although the mutation may also affect the surrounding geometry. Overall, the present analysis highlights the impact of the electrostatic interaction of Tyr-M210 on the efficient charge separation along the L-branch.
The absolute values of the calculated excitonic couplings in PSII are in the range of 7 to 15 meV (Table 1). The lowest and second lowest excitons obtained by diagonalizing the coupling matrix are localized on and , respectively (Fig. S2†), which can be regarded as Frenkel excitons. The quantitative values of the exciton energies in PSII calculated using TDDFT-QM/MM/PCM with the CAMB3LYP functional tend to be blue-shifted as compared to the experimental values,25–27 where the calculated lowest exciton energy of 632 nm is blue-shifted as compared to the experimental value of 680 nm.25–27
We analyze charge separation from an exciton on by means of quantum dynamics calculations. The initial electron transfer from to ChlD1˙+PheoD1˙− occurs on an ultrafast time scale (τ1 ≈ 0.15 ps) (Fig. 4a and c) owing to a strong electronic coupling (∼22 meV, Fig. 4c and Table 1). The subsequent hole transfer to PD1˙+PheoD1˙− occurs on a time scale of τ2 ≈ 3.7 ps (Fig. 4a and c). Thus, once accepts an exciton, charge separation occurs efficiently along the D1-branch. Similar time constants of charge separation in PSII were observed in the time-resolved spectroscopy measurements.14,22 Another charge separation pathway, → PD1˙+ChlD1˙−, is endothermic (Fig. 3c) and thus cannot compete with → ChlD1˙+PheoD1˙−. Although other charge separation pathways from an exciton on and were also proposed,23,24 the quantum dynamical analysis for these pathways is beyond the scope of the present study. Overall, we can conclude that charge separation along the D1-branch proceeds via two-step → ChlD1˙+PheoD1˙− and ChlD1˙+ → PD1˙+ transfers, considering the quantum dynamical analysis based on the energetics and electronic couplings from the QM/MM/PCM method.
Fig. 4 Population of excited states during quantum dynamics calculations of charge separation in PSII: (a) , ChlD1˙+PheoD1˙−, and PD1˙+PheoD1˙− along the D1-branch and (b) from to PD1˙+ChlD2˙−. Dotted lines indicate curve fitting by using eqn (5). Diagram of charge separation with the absolute value of electronic coupling (meV): (c) from and (d) from . Population of excited states during quantum dynamics calculations from : (e) simultaneously considering indirect → ChlD1˙+PheoD1˙− (τ ≈ 50 ps) and direct → ChlD1˙+PheoD1˙− pathways, and (f) ChlD1˙+PheoD1˙− population considering only the indirect (black) or the direct (blue) pathway. The PD1˙+ChlD2˙− population (green) is shown again for comparison. (g) Exciton transfer pathways (blue arrows) with the excitonic coupling (meV). Orange arrows indicate the direction of transition dipole moment. Solid and dotted arrows indicate indirect and direct exciton transfers, respectively. (h) Exciton transfer and charge separation pathways with the excitation energy. |
The electronic coupling of the → ChlD1˙+PheoD1˙− transfer (∼22 meV) is stronger than that of the ChlD1˙+ → PD1˙+ transfer (∼6 meV, Fig. 4c and Table 1). The strong electronic coupling between the accessary Chl/BChl and the Pheo/BPheo is a common feature of PSII/PbRC. Nevertheless, the BL˙− → HL˙− electron transfer (∼1.8 ps) in PbRC is slower than the → ChlD1˙+PheoD1˙− transfer (∼0.15 ps) in PSII, because the population of the (PLPM)˙+BL˙− intermediate state in PbRC is kept small.
Because ChlD2 can also accept an exciton form CP47 on the D2 side,3,9,10 the question arises as to how the exciton on eventually undergoes charge separation in the D1-branch. To analyze charge separation mechanisms from an exciton in the D2-branch, we carried out quantum dynamics calculations considering the initial exciton localized on . The charge separated state in the D2-branch, PD1˙+PheoD2˙−, is less stable than that in the D1-branch, PD1˙+PheoD1˙− (Fig. 3c), owing mainly to a difference in the potentials between PheoD1˙− and PheoD2˙−.33,34,36
The most stable charge separated state in the D2-branch is PD1˙+ChlD2˙− (Fig. 3c). However, PSII can avoid charge separation from to PD1˙+ChlD2˙− (Fig. 4b) because of a weak electronic coupling (∼0.3 meV, Fig. 4d and Table 1), which is significantly weaker than that between and PD2˙+ChlD1˙− (∼5.4 meV) on the counterpart side (Fig. 5a and Table 1). The difference originates from the difference in the vinyl-group orientation between PD1 and PD2 (Fig. 5). The vinyl group is rather in plane for PD1 and out of plane for PD2 (Fig. 6).57 The present results indicate that the in-plane PD1 vinyl group interferes with the π–π interaction between PD1 and ChlD2 (Fig. 5b), thereby preventing the charge transfer to form PD1˙+ChlD2˙−.
The out-of-plane orientation of the PD2 vinyl group is caused by the relatively large steric hindrance from the PD1 phytol chain as compared with that between the PD1 vinyl group and the PD2 phytol chain (Fig. 5c and 6). The potential curves calculated using QM/MM indicate that the rotations of the PD1 and PD2 vinyl groups are hindered in the protein environments (Fig. 6 and S1†). Umena et al. reported that the conformations of vinyl groups were determined unambiguously from the corresponding electron density distributions and most of the vinyl groups are located in or near the same plane of the chlorine ring,73 which suggests that the out-of-plane vinyl orientation for PD2 is exceptional. The same conformations of the PD1 and PD2 vinyl groups have also been observed in the X-ray free electron laser (XFEL) structure.78 Thus, the observed vinyl orientations of PD1 and PD2 are considered to be robust in the protein environments. The phytol chains of PD1 and PD2 are less flexible due to the presence of the highly packed protein environment of D1/D2/CP43/CP47, as compared to those exposed to the protein surface in antenna proteins (e.g., LH1 and the Fenna–Matthews–Olson protein). Umena et al. also confirmed that all of the C8 and C13 positions in the phytol chains have a (R,R) configuration as indicated by the low B-factor values.73 Notably, the difference in the phytol-chain conformation also contributes to the asymmetric hole distribution on PD1 and PD2, i.e., PD1˙+ > PD2˙+.57 These results suggest that the symmetry-breaking of the PD1PD2 geometry not only increases the PD1˙+ population, which facilitates water oxidation at the Mn4CaO5 moiety on the D1 side, but also prevents charge separation along the D2-branch via a weak electronic coupling between and PD1˙+ChlD2˙−.
The quantum dynamics calculations indicate that the exciton on can be transferred to ChlD1via the direct pathway and the indirect pathway mediated by and owing to adequately strong excitonic couplings (Table 1 and Fig. 4g) and small energy differences (Fig. 4h). Note that among the residues near ChlD1 and ChlD2, D1-Met172 adjacent to ChlD1 contributes to the difference in excitation energy between and .34 Previous calculations by Sirohiwal et al.38 using other DFT functionals and an equation-of-motion coupled cluster method also indicated that ChlD1 exhibits the lowest excitation energy in the protein environment of PSII. Once the exciton is transferred to ChlD1, subsequent charge separation to ChlD1˙+PheoD1˙− occurs rapidly. The present analysis indicates that an overall time scale of charge separation from to ChlD1˙+PheoD1˙− is in the order of a few tens ps (Fig. 4e and f), where exponential fitting indicates a τ of ∼50 ps. It is highly likely that the exciton on can eventually undergo charge separation in the D1-branch without charge separation in the D2-branch. Even though the energy difference between and is small (Fig. 4h), the ultrafast charge separation from to ChlD1˙+PheoD1˙− prevents exciton back transfer to ChlD2, enhancing the robustness of unidirectional charge separation along the D1-branch. The charge separation pathway via the exciton transfer from the D2- to D1-branches may correspond to the delayed component observed in the time-resolved spectroscopic measurements apart from the ultrafast → ChlD1˙+PheoD1˙− charge separation within the D1-branch.14
The direct excitonic coupling between and is relatively weak (∼2 meV) owing to the long distance (∼20 Å) as compared with the coupling between neighboring Chls, i.e., pairs (Fig. 4g and Table 1). Consequently, charge separation considering only the direct → ChlD1˙+PheoD1˙− pathway is slower than charge separation considering only the indirect → ChlD1˙+PheoD1˙− pathway in the quantum dynamics calculations (Fig. 4f). The excitonic coupling between and (−14 meV) is stronger than that between and (7 meV, Table 1). The former and latter are characterized as J- and H-aggregates (minus and plus signs), respectively, considering the directions of the transition dipole moments (Fig. 4g). The excitonic coupling is relatively insensitive to the orbital overlap as compared with the case of the charge transfer coupling. The direct and indirect exciton transfers exhibit the destructive interference of the quantum phase factor, which is dictated by the signs of excitonic couplings, i.e., relative orientation of the transition dipole moments. Consequently, the exciton transfer rate considering all pathways is slower than the rate considering only the indirect pathway (Fig. 4f). Thus, in terms of the phase factor, the configuration of Chls in PSII is not necessarily optimal for accelerating the transfer, while the configuration is optimal for charge separation along the D1-branch.
Overall, it can be concluded that the exciton transfer followed by charge separation to ChlD1˙+PheoD1˙− in the D1-branch is overwhelmingly faster than charge separation in the D2-branch (Fig. 4f). The irreversible exciton transfer allows PSII to utilize the excitation energy from both the CP43 and CP47 antenna complexes for charge separation in the active branch.
In PSII, both ChlD1 and ChlD2 can accept an exciton from CP43 and CP47, respectively. The → ChlD1˙+PheoD1˙− electron transfer occurs on an ultrafast time scale (∼0.15 ps), followed by the ChlD1˙+ → PD1˙+ hole transfer on a time scale of ∼3.7 ps (Fig. 4a), as suggested by time-resolved spectroscopic measurements.14 Charge separation in the D2-branch is unlikely to occur despite the relatively stable PD1˙+ChlD2˙− state, because the in-plane PD1 vinyl group interferes with the π–π interaction between PD1 and ChlD2, thereby weakening the electronic coupling. The exciton on can be transferred to ChlD1via the direct and indirect pathways. Subsequently, the ultrafast → ChlD1˙+PheoD1˙− charge separation prevents exciton back transfer to ChlD2, thereby enhancing the robustness of unidirectional charge separation in the D1-branch. Thus, PSII efficiently utilizes excitons not only from CP43 (D1 side) but also from CP47 (D2 side) for charge separation in the D1-branch, which leads to electron transfer to QBvia QA and hole transfer to the Mn4CaO5 cluster on the D1 side.
Footnote |
† Electronic supplementary information (ESI) available. See DOI: 10.1039/d1sc01497h |
This journal is © The Royal Society of Chemistry 2021 |