Issue 25, 2018

New paper-based microfluidic tools for the analysis of blood serum protein and creatinine built via aerosolized deposition of polycaprolactone

Abstract

This article describes a low-cost method for rapid fabrication of paper-based microfluidic devices using an aerosolized polymeric solution and substrates masked with painter's tape. This approach requires only a few simple tools and uses low-cost supplies to achieve fully functional microfluidic paper-based analytical devices. The method is capable of producing devices with minimum hydrophilic channel widths of 482 ± 4 μm, with the channel height being dictated by the substrate thickness. Complete hydrophobic barriers can be achieved with widths of only 257 ± 2 μm. This technique enables two dimensional (2D) fluidic pattern fabrication on a single membrane while complex three dimensional (3D) fluidic pattern fabrication is possible by simply incorporating a stack and lamination step. Devices built using this approach were applied in two clinical diagnostic applications: quantitative colorimetric assays for protein and for creatinine.

Graphical abstract: New paper-based microfluidic tools for the analysis of blood serum protein and creatinine built via aerosolized deposition of polycaprolactone

Supplementary files

Article information

Article type
Paper
Submitted
01 máj 2018
Accepted
03 jún 2018
First published
04 jún 2018

Anal. Methods, 2018,10, 2994-3000

New paper-based microfluidic tools for the analysis of blood serum protein and creatinine built via aerosolized deposition of polycaprolactone

C. A. Heist, G. C. Bandara, D. J. Bemis, J. C. Pommerenck and V. T. Remcho, Anal. Methods, 2018, 10, 2994 DOI: 10.1039/C8AY00981C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements