Elena N.
Kotelnikova
a,
Anton I.
Isakov
a and
Heike
Lorenz
*b
aDepartment of Crystallography, Saint Petersburg State University, Universitetskaya emb. 7/9, 199034 Saint Petersburg, Russia
bMax Plank Institute for Dynamics of Complex Technical Systems, Sandtorstrasse 1, 39106 Magdeburg, Germany. E-mail: lorenz@mpi-magdeburg.mpg.de; Tel: +49 391 6110 293
First published on 23rd March 2017
Since knowledge on the occurrence of non-equimolar discrete compounds in binary systems containing chiral molecules is very limited, this study reviews and systematizes the current state of investigating such systems and summarizes the results on two example systems studied in detail by the authors. In particular, the identification and verification of the non-equimolar discrete compounds compared to other discrete solid phases occurring in the two systems are discussed by presenting the results of related SCXRD, PXRD, TRPXRD, DSC, IR, and HSM studies. The (S)-malic acid–(R)-malic acid system has been found to contain non-equimolar 1:3 and 3:1 stable (S3R and SR3) and metastable (3S1R and 1S3R) discrete compounds, along with the equimolar compounds RSI and RSII (known monoclinic modifications) and the recently discovered RSIII modification. Polymorphic transformations of the discrete phases are debated, and the crystal structure of the stable compound S3R is identified (S. G. P1). The L-valine–L-isoleucine system has been stated to contain a non-equimolar 2:1 discrete compound, V2I, that could independently be proven by the ternary solubility diagram in water and its crystal structure solved (S. G. C2). The results obtained are discussed in conjunction with the findings reported in the literature. In order to systematize the variety of terms used for the description of discrete phases in binary chiral systems of organic substances, a systematization of equimolar and non-equimolar compounds based on chemical and crystallographic characteristics is proposed.
The three general types of phase diagrams known for chiral systems are shown in Fig. 1 (upper part).5,21 These are diagrams containing a eutectic (Fig. 1a), a binary compound (Fig. 1b), and (complete) solid solutions (Fig. 1c). The exact type of phase diagram is determined by the nature of the equimolar (1:1) mixture of enantiomers. The diagram of the first type corresponds to a physical mixture of enantiomers, or conglomerate, S + R; the second type to a binary compound (racemic compound5), RS; and the third type to a solid solution, S,R. Schematic representations of the equimolar compositions that correspond to the three types mentioned are illustrated in Fig. 1 (bottom part). The maximum of the liquidus line of the racemic compound can lie above or below the melting points of the enantiomers or even be equal to them (Fig. 1b). So, the diagrams of the second type can be further divided into three subtypes.5,6,22 Analogous subtypes are allocated for the diagrams containing solid solutions (Fig. 1c). According to J. Jacques et al.,5 a majority of binary systems (∼90%) belongs to the second type, while the first type systems are much less frequent (∼10%), with the third type being the rarest.
Fig. 1 Three basic types of phase diagrams characterizing binary systems formed by S- and R-enantiomers. At the top: diagrams of the systems containing a conglomerate (a), a racemic compound (b), and solid solutions (c). Subtypes 1, 2, and 3 of racemic compounds have melting points that lie above, are equal to, or lie below the melting points of the enantiomers; subtypes 1, 2, and 3 of the solid solutions are presented in the following order: a non-ideal solution having a maximum, an ideal solution, and a non-ideal solution having a minimum.5At the bottom: schematic representations of molecular packing in the equimolar phases corresponding to the diagrams above. |
A diagram of each type may be further complicated due to polymorphism of the system components and/or equimolar compounds. Moreover, the diagrams of the first two types can be additionally diversified due to the formation of limited solid solutions.19 For example, in very recent work,23 C. Brandel et al. described the complex behavior of the diprophylline enantiomers, a system where solid solutions form in addition to the polymorphism of both the equimolar compound and the enantiomer.23 Possible phase diagram arrangements that can result from such complications are discussed in detail by G. Coquerel.6 However, all the diagrams presented there correspond to binary systems of the same group, viz. systems consisting of enantiomers of the same chemical compound.
In the published literature, there are sparse data on two other groups of binary systems containing chiral molecules. One group includes systems of diastereomers and the other systems of enantiomers of different compounds. Examples of our investigations of the solid phases existing in binary systems of the three above groups are summarized in Table 1.
Molecular components | System | Number of chiral centers | Solid phase characteristics | Ref. |
---|---|---|---|---|
Designations: E3ClMA – ethanolamine salt of 3-chloromandelic acid; Thr and aThr – threonine and allo-threonine; Val – valine; Ile – isoleucine. | ||||
Systems of enantiomers of the same compound | ||||
Enantiomers | (S)-E3ClMA–(R)-E3ClMA | 1 and 1 | Eutectic mixture and limited solid solutions | 24, 25 |
Enantiomers | (S)-Malic acid–(R)-malic acid | 1 and 1 | Equimolar (RS) and non-equimolar (S3R and SR3) discrete compounds and limited solid solutions | 26, 27, 28, 29 |
Enantiomers | L-Thr–D-Thr (L-aThr–D-aThr) | 2 and 2 | Eutectic mixture | 30 |
Systems of diastereomers of the same compound | ||||
Diastereomers | D-Thr–L-aThr (L-Thr–D-aThr) | 2 and 2 | Eutectic mixtures | 31 |
Diastereomers | L-Thr–L-aThr (D-Thr–D-aThr) | 2 and 2 | Complete miscibility | 32, 33 |
The system of enantiomers of different compounds | ||||
Enantiomers of different compounds | L-Val–L-Ile (D-Val–D-Ile) | 1 and 2 | Non-equimolar discrete compound (V2I) and limited solid solutions | 34, 35 |
The three systems of the first group24–30 contain enantiomers of the same compound. The system formed by the S- and R-enantiomers of the ethanolamine salt of 3-chloromandelic acid (E3ClMA) is an example of a eutectic system with partial miscibility between the components.24,25 The system of malic acid S- and R-enantiomers belongs to the type 2 systems showing different polymorphs of the racemic compound and limited solid solutions.26–29 Moreover, the system is complicated by the presence of two non-equimolar discrete compounds, S:R = 1:3 and 3:1.29 The system of L- and D-enantiomers of threonine is a eutectic system free from solid solutions.30 Two shown systems of the second group are formed by diastereomers of the same compound. D- and L-allo-diastereomers of threonine form a eutectic system,31 where, in contrast to the L- and D-threonine system, the eutectic point must be shifted from the equimolar composition. L- and L-allo-diastereomers of threonine show full miscibility in the solid state,32,33 and the phase diagram is asymmetric due to different components' melting points/solubilities.32 The third groups' system studied consists of enantiomers of different compounds: L-valine and L-isoleucine. This system is characterized by the occurrence of a non-equimolar discrete compound Val:Ile = 2:1 and limited solid solutions.34,35
Polymorphism of enantiomers and their equimolar compounds is rather common among chiral systems.6 However, the systems (S)-malic acid–(R)-malic acid and L-valine–L-isoleucine show relatively rarely reported additional phase behaviours as limited solid solutions and, in particular, non-equimolar discrete compounds. Both, as well as literature data concerning these and similar systems, will be presented in this paper. A discrete compound as used here is a solid phase with fixed stoichiometry (equimolar or not but stoichiometric) having a crystal structure different from the compound components and, hence, clearly differs from solid solutions.
The paper is structured as follows. After introducing in section 2 the materials and experimental methods used in our own studies, in section 3, the systems of enantiomers of the same compound containing non-equimolar discrete phases are reviewed and followed by a detailed discussion of the (S)-malic acid–(R)-malic acid example. Section 4 refers to the systems of enantiomers of different compounds containing equimolar and non-equimolar discrete solid phases with a special emphasis on the L-Val–L-Ile system. For both exemplary systems, particular focus is set on discrete compounds described recently. In section 5, a systematization of the discrete compounds occurring in binary chiral systems of organic substances is suggested. Finally, the main results are summarized, and conclusions are drawn.
Ratio S:R | Compounds | Crystal structure; methods of research | Ref. |
---|---|---|---|
a This work. | |||
1:3 | 2,4-Dimethylglutaric acid | Not determined; melt phase diagram | 36, 37 |
1:3 | Tetramisole (6-phenyl-2,3,5,6-tetrahydroimidazo[2,1-b][1,3]thiazole) | Not determined; DSC, PXRD | 38 |
1:3 | 3-Hydroxy-4-(2,4,5-trifluorophenyl)butanoic acid | Not determined; DSC, PXRD, HPLC | 21 |
1:4 | Carvone (2-methyl-5-(prop-1-en-2-yl)cyclohex-2-en-1-one) | Not determined; DSC | 39 |
1:5 | 4-Methyl-7-methylenetricyclo[7.2.1.01,5]dodecan-12-one oxime | Determined | 40 |
1:2 | Bicyclic bis-lactam derivative BBL7 | Determined | 41 |
1:2 | Exo-trans-exo-(13R,24R)-14,23-dioxaoctacyclo (25.3.0.02,5.03,29.04,8.06,10.09,13.024,28) triacontane-15,22-dione | Determined | 42 |
1:2 | 1-(Hydroxymethyl)-4,10-dimethyl-3-oxatricyclo[5.2.1.02,4]decan-10-ol | Determined | 43 |
1:2 | 2-Diisopropylcarbamoyl-3-methylpentane-3,4-diol | Determined | 44 |
1:2 | rac-2,2′-di(Ethoxycarbonyl)-6,6′,7,7′-tetramethoxy-1,1′,2,2′,3,3′,4,4′-octahydro-1,1′-bisisoquinoline | Determined | 45 |
1:2 | (E)-3,4-Di-t-butyl-1,1,2,2-tetrakis(trimethylsilyl)-1,2-disilacyclobutane | Determined | 46 |
1:2 | trans-(1RS,3RS)-2-N,N′-Dimethylaminomethyl-1,3-dithiolane-1,3-dioxide | Determined | 47 |
1:2 | 3-Propyl-4-(p-toluenesulfonylamino)-1,2-diselenolane | Determined | 48 |
1:3 | 3-(2-tert-Butylphenoxy)-propane-1,2-diol | Determined | 49 |
1:3 | 6-(Dimethoxymethylene)-dibenzo(d,k)tricyclo(5.2.2.03,7)undeca-4,10-dien-8-one | Determined | 50 |
1:3 | Malic acid | Determined;a PXRD, DSC, SCXRD, TRPXRD, IR, HSM | 29, 37, anda |
As a result, Table 2 contains 16 systems with non-equimolar discrete compounds of which we have knowledge. It should be mentioned that crystal structures of four of the listed compounds have not yet been clarified.21,36–39 For example, paper21 reports the results of the crystallization of different mixtures of the 3-hydroxy-4-(2,4,5-trifluorophenyl)butanoic acid enantiomers from toluene solutions. In the ternary phase diagram, two additional eutonics and a maximum in-between were detected. The composition S:R = 1:3, corresponding to the maximum, showed both a unique melting point and X-ray powder pattern, leading to the conclusion that it is a discrete compound.
Thus, the compounds found in the systems discussed must be further investigated since a final conclusion can be drawn only after depicting their crystal structures. For this reason, the detection of such compounds can be considered completely valid only for 12 (ref. 29, 40–50) of the systems shown in Table 2. Among them, 1:2 and 1:3 compounds are reported for eight and three cases, respectively; for one system, a 1:5 compound is described. Beside our research on the malic acid system in section 3.2, two examples shall be briefly mentioned.
R. G. Kostyanovsky et al.41 determined crystal structures for two chiral compounds belonging to the group of bicyclic bis-lactam (BBL). There, compound BBL7 is composed of three different, independent homochiral chains: two of them comprising molecules of the same chirality, –R–R–R–, while the third contains molecules of chirality –S–S–S–. Therefore, it could be classified as a compound of an S:R = 1:2 type. A. A. Bredikhin et al.49 studied the 3-(2-tert-butylphenoxy)-propane-1,2-diol system and found an additional peak in the DSC curve for the composition with an S:R ratio close to 1:3. SCXRD analysis of that sample allowed identification of a discrete phase and its crystal structure.
In addition to the racemic compound, the presence of “anomalous racemates” in the malic acid system was firstly reported in paper.37 The authors studied some enantiomeric compositions using HSM and plotted the phase diagram. Besides the maximum corresponding to the racemic compound (RSI, the only modification known at that time), they found additional inflexion points of the liquidus line at compositions S:R = 3:1 and 3:1. They also found that the sample crystallized from aqueous solution with the composition S:R = 1:3 was characterized by a unique diffraction pattern. Later, the authors of other work63 discovered a second monoclinic polymorph of the racemic compound (RSII). They assumed that the inflexions of the liquidus line discovered by previous authors resulted from the intersections of two liquidus lines belonging to the different polymorphs of the racemic compound, which, consequently, could not be proof of the anomalous racemates existence. For many years, this point of view has prevailed. Later, H. Kaemmerer et al.26 carried out experiments to verify that the racemic forms RSI and RSII are monotropically related. They showed that the lower melting form RSII undergoes a polymorphic phase transition to RSI by storage at room temperature. The DSC data also proved monotropy in accordance with the heat-of-fusion rule.64 DSC and DTA studies on S- and RS-malic acid have been also reported by other authors.65
Fig. 3 shows the DSC melting curves for the three racemic phases and the non-equimolar S:R = 3:1 modifications of malic acid. The melting temperatures increased in the order 3S1R, S3R, RSII, RSIII, RSI. Based on the heat-of-fusion rule,64 the monotropic relationships between the polymorphs RSI, RSII and RSIII of the racemic compound as well as the polymorphs S3R and 3S1R of the non-equimolar discrete compounds could be proven (Fig. 3).
Fig. 3 DSC curves and derived melting data of the racemic compounds RSI, RSII, and RSIII and the S3R and 3S1R compounds of malic acid. |
Thermomicroscopic (HSM) investigations of the S-enantiomer, racemic compounds RSI and RSII, physical mixtures of enantiomers S + R with the proportions of 1:1 and 1:3 for the components, and the non-equimolar discrete compounds S3R and 3S1R were performed (ESI:†Fig. 1). Close to the DSC results, the heating of the enantiomer and racemates RSI and RSII did not lead to any noticeable changes until melting of the substances. Instead of powders, in experiments with a 1:1 physical mixture of enantiomers S + R, we used two homochiral crystallites obtained by quenching the melt of the corresponding enantiomers (ESI:†Fig. 1a). The interaction between the enantiomers starts at the contact area of the two grains and leads to the formation of racemic compound. This correlates with the fact that the crystallization of a melt containing two enantiomers provides the compound RSII (ESI:†Table 1). Experiments with the 3:1 physical mixture (S + R) were run with powders (ESI:†Fig. 1b). They resulted in the formation of the discrete compound that finally melts. After recrystallization, a crystallite was taken, which was the metastable discrete phase 3S1R, and analyzed (ESI:†Fig. 1c). A visible transformation of the metastable into the stable phase, 3S1R → S3R, was not observed. The substance melted and recrystallized after removal of the heat.
The thorough study of the malic acid system resulting in identification of various modifications of the equimolar and non-equimolar discrete phases as well as the limits of solid solutions in two of the systems28 facilitates compiling a schematic representation of the phase diagram (Fig. 4). It is based on the data obtained by the PXRD, TRPXRD, DSC, HSM, IR, and SCXRD methods mentioned. The given melting points originate from both the DSC and TRPXRD results. The limits of solid solutions were allocated using the results of a PXRD study of molten mixtures (ESI:†Fig. 2). When compared with the known diagrams of the second type5,21 (see Fig. 1), the diagram of the malic acid system is very complex with the following characteristics. 1) The racemic compound can form three polymorphic modifications, with two of them already known26,58–60,63,65 (RSI and RSII), and the third one (RSIII) discovered by the present authors.27 2) Non-equimolar discrete compounds with the ratio S:R = 3:1 and 1:3 (ref. 29) are formed in the system. 3) The non-equimolar discrete compounds can crystallize in stable (S3R and SR3) and metastable (3S1R and 1S3R) modifications. 4) Studies of the detected discrete phases allow determination of the areas of solid solutions in this system, which are found in the vicinity of all the discrete phases.28
Systems | Methods of research | Crystal structure | Ref. |
---|---|---|---|
(+)-Chlorosuccinic acid–(−)-bromosuccinic acid | Melt phase diagram | Not determined | 68 |
(+)-Mercaptosuccinic acid–(−)-methylsuccinic acid | Melt phase diagram | Not determined | 69 |
(−)-Dilactic acid–(+)-2,4-dimethylglutaric acid | Melt phase diagram | Not determined | 70 |
(−)-Thiodilactic acid–(+)-2,4-dimethylglutaric acid | Melt phase diagram | Not determined | 70 |
(+)-2-Methylglutaric acid–(−)-2,4-dimethylglutaric acid | Melt phase diagram | Not determined | 36 |
(+)-m-Methoxyphenoxypropionic acid–(−)-m-bromophenoxypropionic acid | SCXRD | Determined | 71 |
(S)-2-(3-Bromophenoxy)propionic acid–(R)-2-(3-methoxyphenoxy)propionic acid | SCXRD | Determined | 72 |
(R)-2-(2,4-Dichlorophenyl)propanoic acid–(S)-2-(2-chloro-4-nitrophenyl)propanoic acid | SCXRD | Determined | 73 |
(R)-N-(4-Methylbenzoyl)-R-methylbenzylamine–(S)-N-(4-nitrobenzoyl)-R-methylbenzylamine | SCXRD | Determined | 74 |
(S)-2-(2,4,5-Trichloroanilino)propanoic acid–(R)-2-(2,4,5-trichlorophenoxy)propanoic acid | SCXRD | Determined | 75 |
(R)-N-(2-Chlorobenzoyl)methylbenzylamine–(S)-N-(2-bromobenzoyl)methylbenzylamine | SCXRD | Determined | 76 |
(S,S)-2,8-Dichloro-6H,12H-5,11-methanodibenzo[b,f][1,5]diazocine–(R,R)-2,8-dibromo-6H,12H-5,11-methanodibenzo[b,f][1,5]diazocine | SCXRD | Determined | 77 |
L-Malic–L-tartaric acid | SCXRD | Determined | 78 |
L-Malic–D-tartaric acid | SCXRD | Determined | 79 |
D-Valine–L-isoleucine | SCXRD | Determined | 80 |
Fig. 5 presents the crystal structure of the compound S3R in projections on the planes ab (a), bc (b), and ac (c). It might be described as an arrangement of molecular chains of two types. Chains of the first “enantiomeric” type are composed of molecules of the same chirality –S–S–S–S–, while chains of the second “racemic” type include alternating molecules of both chiralities –S–R–S–R–.
ESI:†Fig. 4 shows projections of the crystal structures of racemate RSI, racemate RSII, S-enantiomer, and compound S3R onto the ab and bc planes. The most interesting for analysis of these crystal structures are their projections on the ac plane depicted in Fig. 6. It can be seen that the neighbor molecules within the chains are interlinked via hydrogen bonds in all the crystal structures of RSI (Fig. 6a), RSII (Fig. 6b), S (Fig. 6c), and S3R (Fig. 6d). For a convenient description, two opposite edges of the molecules will be designated here as a “head” and a “tail”, where the head is the end of the molecule, which is closer to the side OH group, while the opposite end is, correspondingly, the tail.
Fig. 6 Crystal structures of the racemic compounds RSI (a) and RSII (b), enantiomer S (c), and compound S3R (d) of malic acid in projections upon the ac plane. The color designations of the S- and R-molecules are the same as in Fig. 5. |
In the crystal structures of racemate RSI, S-enantiomer and compound S3R, the neighbor molecules have “head-to-head, tail-to-tail” connections. Molecules of different chiralities are characterized by the same conformation in the case of RSI chains and “racemic” chains of S3R. Alternatively, molecules of the same chirality in the case of enantiomer chains and “enantiomeric” chains of S3R are characterized by two conformations; this allows interlinking of such molecules. The crystal structure of RSII contains “head-to-tail” arrangements of molecules. As for RSI, the molecules are also characterized by different chiralities and by the same conformation.
In the crystal structures of all the malic acid compounds, the hydrogen bonds between neighbor molecules are conducted by the edge COOH groups. Two COOH groups belonging to neighbor molecules form carboxylic dimers (dimer ring). The differences in H-bond topography between various compounds (RSI, RSII, S, and S3R) are due to the number of such contacts linking the molecules of the neighbor chains. In the case of RSI (Fig. 6a), there is an alternating number of H-bonds that connect the carboxylic rings corresponding to the neighbor chains. Carboxylic rings forming four contacts alternate with those forming six contacts. In Fig. 6, the contacts connecting the carboxylic dimers, as well as the contacts forming the dimers, are shown by the blue dashed lines. In the case of RSII (Fig. 6b), there are no hydrogen bonds between the neighbor chains. In the case of the S-enantiomer (Fig. 6c), only half of the carboxylic rings are connected to those of a neighbor chain. There are five H-bonds per one ring. Moreover, there are two H-bonds on both sides from the ring that connect the pendant OH groups of the molecules corresponding to the neighbor chains. The contacts are shown by green dashed lines. In the case of S3R (Fig. 6d), there are rings of four types. This is due to molecular chains of two types alternating in the crystal structure – enantiomeric and racemic. In the enantiomeric chains, there are alternating dimers with three and two contacts with the neighbor chains. In the racemic chains, there are alternating dimers forming two and four such contacts.
For convenience, the crystal structures described are schematically shown in Fig. 7(a–d). The use of different colors enables distinguishing S- and R-enantiomer molecules, and the OH groups are indicated to recognize the “tails” and the “heads” of the molecules. The molecule shape reflects its conformation – a straight shape corresponds to the “racemic” conformation, while the slanted shape corresponds to the “enantiomeric” conformation. This representation shows the principle packing of molecular chains of two types in the crystal structure of the compound S3R. The crystal structure is a combination of the racemate RSI chains and S-enantiomer chains.
The most interesting for our discussion are three systems: L-malic acid–L-tartaric acid,78L-malic acid–D-tartaric acid79 and D-valine–L-isoleucine,80 while malic acid and L-valine–L-isoleucine are, in turn, the subjects of our studies (see Table 1).
The first two systems differ from each other only in the type of chirality of tartaric acid as the second component. It should be noted that malic and tartaric acids have non-coinciding directions of rotation for the polarized light plane, which are L(−) and D(+) for malic acid and L(+) and D(−) for tartaric acid. The configuration difference of the tartaric acid molecule is reflected in the structure of the resulting binary compounds. The compound formed in the L-malic acid–D-tartaric acid system has the space group P21, while the one in the L-malic acid–L-tartaric acid system is characterized by the space group P1. The schematic representations of the molecular packing in the equimolar compounds of the above systems and selected discrete phases in the system of malic acid enantiomers are shown in Fig. 7(e and f) and (a–d), respectively. The third system, D-valine–L-isoleucine, differs from the one we studied only in having a different chirality in valine. This discrepancy determines the differences in the molecular compositions of the discrete compounds formed in the corresponding systems. A comparative analysis of their crystal structures is given in section 4.2.
L-Malic acid–D-tartaric acid system (Fig. 7e) is denoted L–D′. In the molecular chains of the LD′ binary compound of this system, the malic acid molecules only have the “racemic” conformation. In contrast to the chain arrangements in malic acid RSI and RSII (Fig. 7a and b), the neighbor chains are shifted relative to each other by one molecule in the direction of their elongation. This shift results in the molecules having a staggered arrangement (Fig. 7e). The tartaric acid molecule contains two side OH groups, while malic acid only has one. Hence, the neighbor molecular chains in the crystal structure of tartaric acid form more hydrogen bonds than the chains in the crystal structure of the malic acid racemate RSI.
L-Malic acid–L-tartaric acid system (Fig. 7f) is denoted L–L′. Similar to the LD′ compound, in the molecular chains of the LL′ discrete compound, the malic acid molecules only have the “racemic” conformation, and the neighbor chains are shifted, forming a staggered arrangement. The difference is that the “heads” of the malic acid molecules in the neighbor chains of the binary compound LL′ are directed to the same direction (Fig. 7f), while in the LD′ compound, they face the opposite sides (Fig. 7e).
Systems | Ratio | Methods of research | Crystal structure | Ref. |
---|---|---|---|---|
(+)-2,4-Dimethylglutaric acid–(−)-dilactic acid | 3:1 | Melt phase diagram | Not determined | 70 |
(−)-2,4-Dimethylglutaric acid–(+)-2-methylglutaric acid | 3:1 | Melt phase diagram | Not determined | 36 |
L-Valine–L-isoleucine | 2:1 | SCXRD, PXRD, TRPXRD | Determined | 34, 35 |
The principal feature distinguishing the L-valine–L-isoleucine system from those discussed above is the same – the L-chirality (configuration) of its components. The valine molecule has one chiral center; isoleucine contains two unequal chiral centers that differ from the (−)-dilactic and (+)-2,4-dimethylglutaric acid molecules, which have equal chiral centers (Table 4).
At least since 1933,81 studies of solubility of Ile and Val in combination, and of individual solubilities of Val82,83 and Ile84,85 have been performed. The equilibria between the solid and liquid phases in the ternary system L-Val–L-Ile–water were studied by I. Kurosawa et al.86 (HPLC and PXRD) and by D. Binev et al.87 (HPLC). H. Koolman and R. Rousseau88 investigated (SCXRD) the effect of small amounts of Val admixture on the growth and morphology of Ile crystals. The detailed correlation to our findings is discussed in work,34 where most of our results for the L-Val–L-Ile system using HPLC (11 samples), PXRD (13 compositions), and SCXRD methods are published. First data obtained by TRPXRD was recently reported.35
According to the PXRD data, the limits of solid solutions in the system L-Val–L-Ile are rather limited. The system has been found to contain a non-equimolar discrete compound V2I with the ratio Val:Ile = 2:1 (∼66 mol% Val). According to this, three areas of solid solutions (ss) originating from valine ssV (>70 mol% Val), isoleucine ssI (<10 mol% Val), and discrete compound ssV2I (60–68 mol% Val) were distinguished; also, two-phase regions were identified consisting of solid solutions ssI + ssV2I (10–60 mol% Val) and ssV2I + ssV (68–70 mol% Val). The results agree well with that obtained by independent HPLC studies. As shown in Fig. 8, the ternary phase diagram of the system L-Val–L-Ile–water contains a local solubility minimum that corresponds to the composition of ∼66 mol% Val and is positioned in-between two eutonics laying asymmetrically left and right from it. Such behavior of the solubility curve is characteristic for systems containing a binary discrete compound.22,89 Although the absolute solubility data (obtained by different methods) differ slightly from each other, they clearly indicate the local solubility minimum close to the 2:1 Val:Ile composition and verify the presence of the related V2I compound in the system.
Fig. 8 Ternary phase diagram (50 °C) of the system L-Val–L-Ile–water. Green and blue triangles denote solubility data obtained by evaporation and cooling methods, respectively. Note that the solubilities occupy only the upper 1.5 mol% of the diagram. Green squares denote the compositions of the corresponding solids obtained from HPLC compositional analyses. Isotherm line is just to guide the eye (part of the data was published in former work34). |
The monoclinic cells of Val and Ile (space group P21) (Fig. 9a and b) are characterized by two crystallographically independent positions of the molecules.90–94 Molecules occupying both positions have the same conformation. The monoclinic cell of V2I (space group C2) (Fig. 9c) is characterized by four independent positions of the molecules, each of which have mixed populations, i.e., can be occupied by either a Val or Ile molecule. The parameter a of the V2I monoclinic cell is doubled in comparison to the corresponding parameters c of Val and Ile monoclinic cells (due to different unit cell orientations). The empirical formula of compound V2I calculated on the basis of structural data corresponds to the Val:Ile ratio of ∼60:40 and is practically confirmed by the composition of the sample studied (66 mol% Val). The calculated powder X-ray diffraction pattern shows good agreement with the experimentally obtained one.34
Fig. 9 Projections of the monoclinic cells of Val (a), Ile (b) and the discrete compound V2I (c) on the ac plane34 as well as levorotatory molecules of Val (d) and Ile (e). Atoms C, O, N, and H are colored in black, red, blue, and gray, respectively. The H atom of Val and CH3 group of Ile are circled. The projections of the monoclinic cells of Val and Ile are plotted using structural data from CSD (identifiers LVALIN01 and LISLEU02, respectively).94 |
Similar to the crystal structures of Val90,92,94 and Ile,91,93,94 the crystal structure of the discrete compound V2I is layered. Molecules in the three crystal structures are combined in H-bonded dimer molecules, and dimers form molecular layers also via H-bonds. The layers interact with each other by van der Waals forces. The Val and Ile dimers are elongated along the c axis, and the layers are connected by axes 21. However, the dimers in the crystal structure of V2I are elongated along the a axis, and the layers are connected by axes 21 and 2. The difference in the azimuthal arrangement of the molecular layers can be seen easily if the doubled unit cell of Ile and the unit cell of V2I are compared (see ESI:†Fig. 5 and work34).
Components of the system D-Val–L-Ile are known in the literature80 and were mentioned before (Table 3). They differ from those of the system L-Val–L-Ile only by the configuration of the valine molecules. These systems exemplify the effect of the different chiralities of the molecules forming a binary system. In the first system,80 an equimolar discrete compound VI (Val:Ile = 1:1) is formed, while in the second system, a non-equimolar discrete compound V2I (Val:Ile = 2:1) is formed. The crystal structures of both compounds are characterized by alternating azimuthally non-equivalent molecular layers and by doubled unit cells including two layers in corresponding translation. Wherein, the compound VI crystallizes in the space group P21, and the compound V2I in the space group C2.
Schematic representations of the molecular packing in the crystal structures of Val, Ile, V2I, and VI are shown in Fig. 10 for comparison. Molecules with L-configuration and the coordinates y and y + 1/2 at the b axis of the unit cell are shown in blue and light blue colors, respectively; molecules with D-configuration are in green. Different shapes of the Val and Ile molecules reflect the fact that in comparison to Val, the edge H atom is replaced by a CH3 group in Ile. The group is shown by an additional rear circle. Partial coloring of the circle in the case of V2I symbolizes the partial (33%) occupation of the site by a rear CH3 group.
We have attempted to systematize the data on discrete compounds in such systems, and the results are compiled in Table 5. The systematization is not aimed at changing the terminology but clarifying what is exactly meant under the terms mentioned. To make the systematics viable, it is necessary to define the border lines covering the types of compounds that can be included.
Equimolar discrete compounds 1:1 | ||||||
---|---|---|---|---|---|---|
Homomolecular (racemic) compounds | Heteromolecular compounds | |||||
Centrosymmetric | Non-centrosymmetric | Pseudo-centrosymmetric | Non-centrosymmetric | |||
S and R molecules are connected via other symmetry elements | Independent S and R molecules | 1:1 Complexes104 | Quasiracemates105 | Cocrystals79 | 1:1 complexes106,108 | |
Racemic compounds (true racemates)5 | Racemic compounds (true racemates)5 | Kryptoracemates101 (= false conglomerates102) | ||||
Enantiomers S:R | Enantiomers S:R | Enantiomers S:R | Diastereomers S:Sa (R:Ra) and S:Ra (R:Sa) | Enantiomers of different substances S:R′ (S′:R) | Enantiomers of different substances S:R′ (S′:R) and S:S′ (R′:R) | Diastereomers of different substances |
e.g.: Malic acid RSI29 | e.g.: Malic acid RSII29 | e.g.: SR-Allylglycine103 | e.g. (S:Sa): L-Isoleucine–L-allo-isoleucine104 | e.g.: L-Isoleucine–D-valine80 | e.g. (L:L′): L-Malic acid–L-tartaric acid78 | e.g. (R′:Sa): D-Norleucine–L-allo-isoleucine106 |
e.g. (S:Ra): L-Isoleucine–D-allo-isoleucine104 | e.g. (L:D′): L-Malic acid–D-tartaric acid79 | e.g. (S:Ra′): L-Phenylalanine–D–allo-isoleucine108 |
Non-equimolar discrete compounds 1:N | ||||||
---|---|---|---|---|---|---|
Homomolecular compounds | Heteromolecular compounds | |||||
Anomalous racemates51 (= anomalous conglomerates52,107) | Diastereomers S:Sa (R:Ra) and S:Ra (R:Sa) = 1:N and N:1 | Anomalous quasiracemates37 | Enantiomers of different substances S:S′ (R:R′) = 1:N or N:1 | Diastereomers of different substances S′:Ra (R′:Sa) and S:Ra′ (R:Sa′) = 1:N or N:1 | ||
Enantiomers S:R = 1:N and N:1 | Enantiomers of different substances S:R′ (S′:R) = 1:N or N:1 | |||||
e.g.: Malic acid S:R = 1:3 and 3:1 (ref. 29) | No examples found | e.g. (S:R′): Dilactic acid–dimethylglutaric acid = 1:3 (ref. 70) | e.g. (S:S′): L-Valine–L-isoleucine = 2:1 (ref. 34) | No examples found |
First, it is applicable only to chiral compounds that are “true” organic substances (known to contain a selected number of chemical elements95) and, therefore, excludes organometallic compounds. Second, the systematization is proposed only for compounds formed in true binary systems, i.e., substances composed of only two molecular species. That is why it does not encompass compounds containing solvent molecules. For example, E. Wachter et al.96 recently described the crystal structure of a PF6− salt of [Ru(2,9-dimethyl-1,10-phenanthroline)2(dipyrido[3,2-d:2′,3′-f]quinoxaline)]2+ with the enantiomer ratio of 5:4. However, the crystal structure of this compound incorporates molecules of the solvents (acetone, diethyl ether, and water) in addition to the organometallic component. Third, we only consider hydrogen and van der Waals-bonded crystals where the molecular components are related to each other as enantiomers or quasi-enantiomers (including diastereomers).97 Furthermore, attention should be paid to the term “cocrystals,” which is frequently used in relation to pharmaceuticals with the potential to improve their physicochemical properties.98 A broadly accepted definition of the term comprises substances composed of two or more neutral molecular components at definite stoichiometric amounts, which are characterized by structural homogeneity and the absence of solvate molecules in their crystal structure.99,100 Therefore, related compounds include binary donor–acceptor complexes and crystals with hydrogen bonds.99 Consequently, the term cocrystal has a rather broad definition, especially considering chiral and achiral compounds. Accordingly, only cocrystals containing chiral components and only two of them find proper positions in our systematization.
The systematization in Table 5 is based on the following two principles. Principle 1: Classification according to the composition of the compound: 1) division into two major groups, viz.: equimolar and non-equimolar discrete compounds (at top and bottom of Table 5), and 2) further division into two subgroups, viz.: homomolecular and heteromolecular compounds, i.e., compounds composed of molecules of the same or different substances. Principle 2: Classification within each one of the four resulting subgroups according to 1) compound stereochemistry (enantiomers or diastereomers) and 2) crystallographic features. Each subsection in the table provides particular examples. The references given there correspond to the original publications with the authors' definitions.
Centrosymmetric compounds of this group are represented only by racemic compounds or true racemates.5 They form the most abundant and most frequently studied group. In the compounds, molecules form dimers, wherein a dextrorotatory molecule is connected to a levorotatory one via an inversion center. One of the feasible examples is racemic malic acid of the RSI modification.27–29
Non-centrosymmetric compounds of this group are much less frequently occurring and can be divided into three subgroups. The first one is also represented by racemic compounds. S and R molecules do not form dimers here; they are combined via other symmetry elements instead of an inversion center. It includes the RSII modification of racemic malic acid discussed before.27–29 The second subgroup consists of kryptoracemates,101 also known as false conglomerates.102 In compounds of this type, S and R molecules occupy independent crystallographic positions, i.e., they are not connected via symmetry elements. According to the authors,101 about 180 substances form compounds of this type. The third subgroup is comprised of compounds named 1:1 complexes,104 where the components are diastereomers of the same substance and can have either the same chirality (S:Sa and R:Ra) or different chiralities (S:Ra and R:Sa). Diastereomeric molecules forming such pairs cannot be related via symmetry elements.
Pseudo-centrosymmetric compounds of this type are known to be reported as quasiracemates.105 They contain enantiomer molecules of different substances (see Table 3). However, structural differences between the molecules are rather insignificant, and, usually, they differ only by one atom or a small group of atoms. In some works,97 the term “quasienantiomers” is used for such molecules. In a crystal structure, a pair of such molecules usually forms a dimer, wherein the molecules are connected to each other via a pseudo-inversion center.
Non-centrosymmetric compounds of this group can be subdivided into two subgroups. One of them would include cocrystals,79i.e., the system components are enantiomers of different substances. The other one contains 1:1 complexes,97,106 wherein the system components are diastereomers of different compounds.
According to statistical data,96 the occurrence of non-equimolar discrete compounds among substances with chiral molecules is negligible, being 1:100000. If so, is their study practical? We think that it is. Their physicochemical properties (beneficial, harmful, or neutral) have not been sufficiently investigated yet. We suppose that this may change in the future provided the examinations of chiral systems (enantiomers and diastereomers) are performed using a combination of precision methods. Both systems that we investigated can serve as good examples.
For the systems (S)-malic acid–(R)-malic acid and L-valine–L-isoleucine, as examples representing different types of binary systems, the crystal structures of the non-equimolar discrete compounds were analyzed on the basis of comprehensive experimental studies. The results obtained were compared with the data reported in the literature for these two and other similar systems.
The (S)-malic acid–(R)-malic acid system was shown to form 1) an equimolar compound, which could occur in three modifications; two of these, the RSI and RSII modifications, have been known for some time, while the third form, RSIII, was discovered and described by the present authors, and 2) the non-equimolar stable (S3R and SR3) and metastable (3S1R and 1S3R) compounds with ratios S:R equal to 3:1 and 1:3, correspondingly. Crystallization conditions resulting in the formation of a particular modification of both equimolar and non-equimolar compounds have been ascertained, and the polymorphic transformations between the discrete phases have been studied. The data obtained were used to plot a schematic representation of the system phase diagram. The (triclinic) crystal structure of the non-equimolar discrete compound S3R has been identified and compared to those of the S-enantiomer and the racemic compounds RSI and RSII. At present, information on the crystal structures of non-equimolar discrete compounds is available only for a dozen systems of enantiomers of the same compound of which we have knowledge (including our data).
For the L-valine–L-isoleucine system, the occurrence of a non-equimolar compound V2I with the Val:Ile ratio of 2:1 could be proven. The solubility diagram plotted for the ternary L-valine–L-isoleucine–water system exhibits two eutonics located on both sides from the local solubility minimum, which corresponds to the composition of compound V2I. The (monoclinic) crystal structure of the V2I compound has been determined and compared to those of the system components L-Val, L-Ile and the equimolar compound formed in the D-Val–L-Ile system. To the best of our knowledge, this is the only available information on the crystal structure of a non-equimolar compound in a system of enantiomers of different substances and, at the same time, the only example of a binary compound where these enantiomers are of the same chirality.
Based on the results of the study, a systematization of discrete compounds occurring in binary chiral systems of organic substances was proposed. This was motivated by the great scope of the acquired knowledge and the variety of terms used in the literature. The presented systematics define chemical and crystallographic characteristics of the discrete compounds that can be ascertained when using a particular term. To increase its applicability, the types of compounds covered with the systematization were defined. Of course, we do not consider this systematization as complete and all-encompassing. New materials are steadily appearing that might fill the still empty places in the systematization table and support a deeper understanding of the structure–property relationships within the systems studied.
Footnote |
† Electronic supplementary information (ESI) available: 5 Figures and 3 Tables. CCDC 1501884 and 1468938 contain the supplementary crystallographic data for this paper. For ESI and crystallographic data in CIF or other electronic format see DOI: 10.1039/c6ce02209j |
This journal is © The Royal Society of Chemistry 2017 |