Direct hot deformation of as-grown n-type Bi2Te3 ingots: a simple thermoelectric optimization strategy

Chuandong Zhou, Jianfeng Cai, Qiang Zhang, Guoqiang Liu, Xiaojian Tan, Jiaze Zhu, Guodong Zhang, Jiehua Wu, Bo Liang and Jun Jiang

J. Mater. Chem. A, 2025, 13, 23939
DOI: 10.1039/D5TA02626A

3D-printed lattice structures for thermoelectric devices – a review

Spyridon N. Katsantonis and Christos Tsamis

J. Mater. Chem. A, 2025, 13, 27794
DOI: 10.1039/D5TA01722J

Advances in Ag2Se-based thermoelectrics from materials to applications

Hao Wu, Xiao-lei Shi, Jingui Duan, Qingfeng Liu and Zhi-Gang Chen

Energy Environ. Sci., 2023, 16, 1870
DOI: 10.1039/D3EE00378G

Boosting the performance of printed thermoelectric materials by inducing morphological anisotropy

Yuan Tian and Francisco Molina-Lopez

Nanoscale, 2021, 13, 5202
DOI: 10.1039/D0NR08144B

Printing thermoelectric inks toward next-generation energy and thermal devices

Minxiang Zeng, Duncan Zavanelli, Jiahao Chen, Mortaza Saeidi-Javash, Yipu Du, Saniya LeBlanc, G. Jeffrey Snyder and Yanliang Zhang

Chem. Soc. Rev., 2022, 51, 485
DOI: 10.1039/D1CS00490E

High density lath twins lead to high thermoelectric conversion efficiency in Bi2Te3 modules

Qianqian Sun, Gang Wu, Xiaojian Tan, Qiang Zhang, Zhe Guo, Qiaoyan Pan, Guoqiang Liu, Peng Sun, Jiehua Wu and Jun Jiang

Mater. Horiz., 2025, 12, 150
DOI: 10.1039/D4MH00977K

Bi2Te3-based wearable thermoelectric generator with high power density: from structure design to application

Xiong Yuan, Zhenming Li, Yuying Shao, Dongwang Yang, Kai Hu, Han You, Zhuoming Xu, Siheng Hua, Wei Liu, Peng Peng, Yonggao Yan and Xinfeng Tang

J. Mater. Chem. C, 2022, 10, 6456
DOI: 10.1039/D2TC00426G

Effect of a self-assembled 3D flower-like hierarchical architecture on the thermoelectric properties of Ag-doped Bi2S3

T. Manimozhi, S. Kavirajan, M. Navaneethan and A. Joseph Sagaya Kennedy

RSC Adv., 2024, 14, 38035
DOI: 10.1039/D4RA04467C

CALPHAD as a powerful technique for design and fabrication of thermoelectric materials

Xiaofang Li, Zhou Li, Chen Chen, Zhifeng Ren, Cuiping Wang, Xingjun Liu, Qian Zhang and Shuo Chen

J. Mater. Chem. A, 2021, 9, 6634
DOI: 10.1039/D0TA12620A

Solid-state cooling: thermoelectrics

Yongxin Qin, Bingchao Qin, Dongyang Wang, Cheng Chang and Li-Dong Zhao

Energy Environ. Sci., 2022, 15, 4527
DOI: 10.1039/D2EE02408J

Ultra-low lattice thermal conductivity realizing ultra-high performance Bi0.48Sb1.52Te3-based thermoelectric material and module

Hongtao Li, Lidong Chen, Zhe Guo, Gang Wu, Xiaojian Tan, Qiang Zhang, Jianfeng Cai, Qianqian Sun, Jacques G. Noudem, Peng Sun, Jiehua Wu, Guo-Qiang Liu and Jun Jiang

Energy Environ. Sci., 2024, 17, 6091
DOI: 10.1039/D4EE02008A

Surface micro-etching of Bi2Te3 thermoelectric legs enables a high-efficiency power generator

Chun Wu, Li Kong, Xiaojian Tan, Qiang Zhang, Yuntian Fu, Haoyang Hu, Peng Sun, Jiehua Wu, Guoqiang Liu and Jun Jiang

J. Mater. Chem. C, 2025, 13, 5673
DOI: 10.1039/D4TC05059B

Improving near-room-temperature thermoelectrics: the role of Ag2Se doping and Bi/Sb ratio in (Bi,Sb)2Te3

Wenxin Ou, Ruiheng Li, Chunliang Zhou, Yuange Luo, Yin Xie and Ran Ang

J. Mater. Chem. A, 2025, 13, 6654
DOI: 10.1039/D4TA08618J

In situ formed nano-interlayer enables robust interface bonding in efficient Bi2Te3-based thermoelectric modules

Rui Zhou, Ziyan Li, Shujing Yang, Xuemei Wang, Xinyi Shen, Long Yang, Zhiwei Chen, Juan Chen and Wen Li

J. Mater. Chem. A, 2025, 13, 34346
DOI: 10.1039/D5TA06391D

Machine learning-assisted 3D printing of thermoelectric materials of ultrahigh performances at room temperature

Kaidong Song, Guoyue Xu, Ali Newaz Mohammad Tanvir, Ke Wang, Md Omarsany Bappy, Haijian Yang, Wenjie Shang, Le Zhou, Alexander W. Dowling, Tengei Luo and Yanliang Zhang

J. Mater. Chem. A, 2024, 12, 21243
DOI: 10.1039/D4TA03062A

Optimized thermal design for excellent wearable thermoelectric generator

Kai Hu, Dongwang Yang, Yueyue Hui, Huazhang Zhang, Rongguo Song, Yutian Liu, Jiang Wang, Pin Wen, Daping He, Xiaopan Liu, Yonggao Yan and Xinfeng Tang

J. Mater. Chem. A, 2022, 10, 24985
DOI: 10.1039/D2TA06966K

A high-efficiency GeTe-based thermoelectric module for low-grade heat recovery

Zhe Guo, Kun Song, Ruoyu Wang, Xiaojian Tan, Lidong Chen, Gang Wu, Qiang Zhang, Peng Sun, Guo-Qiang Liu and Jun Jiang

J. Mater. Chem. A, 2022, 10, 7677
DOI: 10.1039/D2TA00960A

Direct ink writing of high-performance Bi2Te3-based thermoelectric materials using quasi-inorganic inks and interface engineering

Zhengshang Wang, Wen Cui, Hao Yuan, Xiaoli Kang, Zhou Zheng, Longqin Chen, Qiujun Hu, Wenbin Qiu, Jun Tang and Xudong Cui

J. Mater. Chem. A, 2022, 10, 12921
DOI: 10.1039/D2TA02289C

Thermoelectric and mechanical properties of PEDOT:PSS-coated Ag2Se nanowire composite fabricated via digital light processing based 3D printing

Dabin Park, Seonmin Lee and Jooheon Kim

Composites Communications, 2022, 30, 101084
DOI: 10.1016/j.coco.2022.101084

Robust Homogeneous Segmented Power Generator Driven by Sb2Te3‐Based Thermoelectrics

Min Wang, Qiang Zhang, Kaikai Pang, Minhui Yuan, Qiaoyan Pan, Ruyuan Li, Liya Miao, Xiaojian Tan, Haoyang Hu, Jiehua Wu, Peng Sun, Guo‐Qiang Liu and Jun Jiang

Advanced Materials, 2025, 37
DOI: 10.1002/adma.202503128

Enhancing the room temperature thermoelectric performance of n-type Bismuth-telluride-based polycrystalline materials by low-angle grain boundaries

Qi Zhang, Yangjian Lin, Nan Lin, Yuan Yu, Feng Liu, Chenguang Fu, Binghui Ge, Oana Cojocaru-Mirédin, Tiejun Zhu and Xinbing Zhao

Materials Today Physics, 2022, 22, 100573
DOI: 10.1016/j.mtphys.2021.100573

Micro-thermoelectric devices

Qihao Zhang, Kangfa Deng, Lennart Wilkens, Heiko Reith and Kornelius Nielsch

Nat Electron, 2022, 5, 333
DOI: 10.1038/s41928-022-00776-0

High performance magnesium-based plastic semiconductors for flexible thermoelectrics

Airan Li, Yuechu Wang, Yuzheng Li, Xinlei Yang, Pengfei Nan, Kai Liu, Binghui Ge, Chenguang Fu and Tiejun Zhu

Nat Commun, 2024, 15
DOI: 10.1038/s41467-024-49440-5

Facile Fabrication of Flexible and High‐Performing Thermoelectrics by Direct Laser Printing on Plastic Foil

Yuan Tian, Isidro Florenciano, Heyi Xia, Qiyuan Li, Hasan Emre Baysal, Daiman Zhu, Eduardo Ramunni, Sebastian Meyers, Tzu‐Yi Yu, Kitty Baert, Tom Hauffman, Souhaila Nider, Berfu Göksel and Francisco Molina‐Lopez

Advanced Materials, 2024, 36
DOI: 10.1002/adma.202307945

Synergistic Optimization of the Thermoelectric and Mechanical Properties of Large-Size Homogeneous Bi0.5Sb1.5Te3 Bulk Samples via Carrier Engineering for Efficient Energy Harvesting

Chul-hee Lee, Peyala Dharmaiah, Dong Hwan Kim, Duck Ki Yoon, Tae Hoon Kim, Sung Ho Song and Soon-Jik Hong

ACS Appl. Mater. Interfaces, 2022, 14, 10394
DOI: 10.1021/acsami.1c23736

Boosting Thermoelectric Properties of AgBi3(SeyS1–y)5 Solid Solution via Entropy Engineering

Yutian Wu, Xianli Su, Dongwang Yang, Qingjie Zhang and Xinfeng Tang

ACS Appl. Mater. Interfaces, 2021, 13, 4185
DOI: 10.1021/acsami.0c19387

Doping‐Induced Viscoelasticity in PbTe Thermoelectric Inks for 3D Printing of Power‐Generating Tubes

Jungsoo Lee, Seungjun Choo, Hyejin Ju, Jaehyung Hong, Seong Eun Yang, Fredrick Kim, Da Hwi Gu, Jeongin Jang, Gyeonghun Kim, Sangjoon Ahn, Ji Eun Lee, Sung Youb Kim, Han Gi Chae and Jae Sung Son

Advanced Energy Materials, 2021, 11
DOI: 10.1002/aenm.202100190

Thermoelectric performance of p-type (Bi,Sb)2Te3 incorporating amorphous Sb2S3 nanospheres

Deyu Bao, Qiang Sun, Linsen Huang, Jie Chen, Jun Tang, Dali Zhou, Min Hong, Lei Yang and Zhi-Gang Chen

Chemical Engineering Journal, 2022, 430, 132738
DOI: 10.1016/j.cej.2021.132738

Design and Fabrication of Microarchitected Thermoelectric Generators: Prospects and Challenges

Saeed Asadikouhanjani, Ali Zolfagharian and Mahdi Bodaghi

Adv Eng Mater, 2024, 26
DOI: 10.1002/adem.202301609

Additive Manufacturing of Bulk Thermoelectric Architectures: A Review

Cagri Oztan, Ryan Welch and Saniya LeBlanc

Energies, 2022, 15, 3121
DOI: 10.3390/en15093121

Lattice Plainification and Intercalation Advances Power Generation and Thermoelectric Cooling in n‐type Bi2(Te, Se)3

Jiayi Peng, Dongrui Liu, Shulin Bai, Yi Wen, Huiqiang Liang, Lizhong Su, Xin Qian, Dongyang Wang, Xiang Gao, Zhihai Ding, Qian Cao, Yanling Pei, Bingchao Qin and Li‐Dong Zhao

Advanced Energy Materials, 2025, 15
DOI: 10.1002/aenm.202404653

Current State‐of‐the‐Art in the Interface/Surface Modification of Thermoelectric Materials

Shiyang He, Sebastian Lehmann, Amin Bahrami and Kornelius Nielsch

Advanced Energy Materials, 2021, 11
DOI: 10.1002/aenm.202101877

Multi-dimensional interfaces significantly boost the thermoelectric performance of n-Bi2Te3 in a broad temperature range via electron and phonon transport modulation

Yi Qin, Yajuan Zhang, Mengxue Wang, Li Feng, Yuxing Qin, Abdul Waraz, Wenxue Zhang, Jianfeng Zhu and Ting Zhao

Ceramics International, 2025, 51, 18467
DOI: 10.1016/j.ceramint.2025.02.026

Grain Manipulation by Annealing Treatment Realizes High‐Performance N‐Type Bi2Te2.4Se0.6 Thermoelectric Material and Device

Lidong Chen, Zhe Guo, Gang Wu, Xiaojian Tan, Peng Sun, Jiehua Wu, Guo‐Qiang Liu and Jun Jiang

Small Methods, 2025, 9
DOI: 10.1002/smtd.202400953

Accurate Measurements and Error Analysis of Bi2Te3-Based Low-Temperature Thermoelectrics

Jie Zhang, Yixuan Ge, Minhua Huang, Xiaohan Qin, Chao Xin, Linhan Wang, Wenfeng Du, Tianbo Lu, Huaizhou Zhao, Wenjie Liang, Yongjun Cao and Guodong Li

Chinese Phys. Lett., 2025, 42, 056304
DOI: 10.1088/0256-307X/42/5/056304

Materials and underlying principles in vat photopolymerization-based additive manufacturing of electronic ceramics

Weizhe Tang, Guo Liang Goh, Jia Min Lee, Yumeng Tang, Chengli Sun, Rui Dou, Li Wang, Wai Yee Yeong, Xiaosheng Zhang and Yi Zhang

Progress in Materials Science, 2025, 154, 101498
DOI: 10.1016/j.pmatsci.2025.101498

3D printing of metal-based materials for renewable energy applications

Shahryar Mooraj, Zhen Qi, Cheng Zhu, Jie Ren, Siyuan Peng, Liang Liu, Shengbiao Zhang, Shuai Feng, Fanyue Kong, Yanfang Liu, Eric B. Duoss, Sarah Baker and Wen Chen

Nano Res., 2021, 14, 2105
DOI: 10.1007/s12274-020-3230-x

Potential of 3D Printing for Heat Exchanger Heat Transfer Optimization—Sustainability Perspective

Beata Anwajler

Inventions, 2024, 9, 60
DOI: 10.3390/inventions9030060

High thermoelectric and mechanical performance in strong-textured n-type Bi2Te2.7Se0.3 by temperature gradient method

Gang Wu, Xiaojian Tan, Minhui Yuan, Qiang Zhang, Jacques G. Noudem, Zehua Liu, Chen Cui, Jiehua Wu, Haoyang Hu, Peng Sun, Guo-Qiang Liu and Jun Jiang

Chemical Engineering Journal, 2023, 470, 144085
DOI: 10.1016/j.cej.2023.144085

Visualization and analysis of mapping knowledge domain in metal dust explosion research

Hongze Su, Chang Guo, Nan Liu, Xiaoyu Liang and Xiangliang Zhang

Journal of Loss Prevention in the Process Industries, 2025, 98, 105729
DOI: 10.1016/j.jlp.2025.105729

A Flash Vacuum‐Induced Reaction in Preparing High Performance Thermoelectric Cu2S

Yimeng Yu, Dongwang Yang, Jun Li, Mingqi Zhang, Hao Luo, Qi Liang, Hengqiang Ye, Qingjie Zhang, Xinfeng Tang and Jinsong Wu

Adv Funct Materials, 2022, 32
DOI: 10.1002/adfm.202107284

Regulation of dynamic recrystallization in p-type Bi2Te3-based compounds leads to high thermoelectric performance and robust mechanical properties

Shuo Chen, Tingting Luo, Zhen Yang, Shenlong Zhong, Xianli Su, Yonggao Yan, Jinsong Wu, Pierre Ferdinand Poudeu Poudeu, Qingjie Zhang and Xinfeng Tang

Materials Today Physics, 2024, 46, 101524
DOI: 10.1016/j.mtphys.2024.101524

High‐Performance Bi2Te3‐Based Thermoelectrics Enabled by ≈1 nm Metal Chalcogenide Clusters with Size‐Dependent Electron and Phonon Structures

Pengfei Xu, Kangpeng Jin, Yuan Yu, Ming Huang, Zhenhua Yan, Xiang Li, Xiao Gao, Liangwei Fu and Biao Xu

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202401240

Crystalline Structure-Dependent Mechanical and Thermoelectric Performance in Ag2Se1‐xSx System

Jiasheng Liang, Pengfei Qiu, Yuan Zhu, Hui Huang, Zhiqiang Gao, Zhen Zhang, Xun Shi and Lidong Chen

Research, 2020, 2020
DOI: 10.34133/2020/6591981

Multiphase Coherent Nanointerface Network Enhances Thermoelectric Performance for Efficient Energy Conversion and Contactless Thermosensation Applications in GeTe

Jianglong Zhu, Xiaobo Tan, Min Hong, Yanxing Wei, Huangshui Ma, Fan Feng, Yuange Luo, Hao Wu, Qiang Sun and Ran Ang

Advanced Energy Materials, 2024, 14
DOI: 10.1002/aenm.202402552

Optimizing the Thermoelectric Performance of Ag2S-Based Plastic Inorganic Semiconductors for Flexible Thermoelectric Generators

Junyao Jiang, Zheng Ye and Nianling Kuang

ACS Appl. Electron. Mater., 2025, 7, 7862
DOI: 10.1021/acsaelm.5c01239

Miniaturized Mg3Bi2-based thermoelectric cooler for localized electronic thermal management

Chenhao Lin, Xiaojing Ma, Kun Liang, Yao Xu, Hengyu Yang, Jian Wang, Sheng Ye, Jiamin Qiu, Linlin Song, Shizhen Zhi, Jiang Chen, Peng Zhao, Sichen Duan, Zuoxu Wu, Li Yin, Longzhi Wu, Feng Jiang, Zunqian Tang, Feng Cao, Qian Zhang and Jun Mao

Nat Commun, 2025, 16
DOI: 10.1038/s41467-025-63174-y

Multi-scale hierarchical microstructure modulation towards high room temperature thermoelectric performance in n-type Bi2Te3-based alloys

Y.-Z. Li, Q. Zhang, K. Liu, Y.-J. Lin, N. Lin, Y. Yu, F. Liu, X.-B. Zhao, B.-H. Ge, O. Cojocaru-Mirédin, C.-G. Fu and T.-J. Zhu

Materials Today Nano, 2023, 22, 100340
DOI: 10.1016/j.mtnano.2023.100340

Lattice dynamics and thermoelectric properties of diamondoid materials

Hongyao Xie, Li‐Dong Zhao and Mercouri G. Kanatzidis

Interdisciplinary Materials, 2024, 3, 5
DOI: 10.1002/idm2.12134

Intrinsic Off-Centering and Light Conduction Band Structure Lead to High Thermoelectric Performance in N-Type Diamondoid AgInSe2

Jingyi Su, Yukun Liu, Yichen Li, Shulin Bai, Dezheng Gao, Pengpeng Chen, Zihao Zhao, Vinayak P. Dravid, Hongyao Xie, Li-Dong Zhao and Mercouri G. Kanatzidis

J. Am. Chem. Soc., 2025, 147, 16611
DOI: 10.1021/jacs.5c04294

Optimized Thermoelectric Cooler Performance by the Structure-Matching Design of Asymmetrical p/n-Type Legs

Wenjie Zhou, Kaikai Pang, Zongwei Zhang, Hao Yang, Qiang Zhang, Yanan Li, Yuyou Zhang, Haoyang Hu, Xiaojian Tan, Peng Sun, Jiehua Wu, Guoqiang Liu and Jun Jiang

ACS Appl. Mater. Interfaces, 2023, 15, 56064
DOI: 10.1021/acsami.3c14750

The Potential of a Thermoelectric Heat Dissipation System: An Analytical Study

Xuechun Li, Rujie Shi and Kang Zhu

Energies, 2025, 18, 555
DOI: 10.3390/en18030555

Recent Applications of Metal Additive Manufacturing: A Review

Zhicheng Zhang, Hao Wang, Jiashuo Li and Hao Fu

XDI, 2025, 1
DOI: 10.63174/xdi-QFDD2795

Thermoelectric converter: Strategies from materials to device application

Zhenhua Wu, Shuai Zhang, Zekun Liu, Erzhen Mu and Zhiyu Hu

Nano Energy, 2022, 91, 106692
DOI: 10.1016/j.nanoen.2021.106692

Scrap Recovery of n‐Type Bismuth Telluride Ingot by Second Zone Melting and PbBr2 Doping

Shuai Zhuang, Guoqiang Liu, Jianfeng Cai, Manhong Zhang, Haoyang Hu, Jiehua Wu, Peng Sun, Xiaojian Tan and Jun Jiang

Energy Tech, 2023, 11
DOI: 10.1002/ente.202300371

Quadruple-band synglisis enables high thermoelectric efficiency in earth-abundant tin sulfide crystals

Shan Liu, Shulin Bai, Yi Wen, Jing Lou, Yongzhen Jiang, Yingcai Zhu, Dongrui Liu, Yichen Li, Haonan Shi, Shibo Liu, Lei Wang, Junqing Zheng, Zhe Zhao, Yongxin Qin, ZhongKai Liu, Xiang Gao, Bingchao Qin, Cheng Chang, Chao Chang and Li-Dong Zhao

Science, 2025, 387, 202
DOI: 10.1126/science.ado1133

High Thermoelectric Performance in the New Cubic Semiconductor AgSnSbSe3 by High-Entropy Engineering

Yubo Luo, Shiqiang Hao, Songting Cai, Tyler J. Slade, Zhong Zhen Luo, Vinayak P. Dravid, Chris Wolverton, Qingyu Yan and Mercouri G. Kanatzidis

J. Am. Chem. Soc., 2020, 142, 15187
DOI: 10.1021/jacs.0c07803

Shape-Versatile 3D Thermoelectric Generators by Additive Manufacturing

Md Mofasser Mallick, Leonard Franke, Andres Georg Rösch and Uli Lemmer

ACS Energy Lett., 2021, 6, 85
DOI: 10.1021/acsenergylett.0c02159

Expand band gap and suppress bipolar excitation to optimize thermoelectric performance of Bi0.35Sb1.65Te3 sintered materials

Lidong Chen, Qiang Zhang, Zhe Guo, Zipeng Yan, Kun Song, Gang Wu, Xuemei Wang, Xiaojian Tan, Haoyang Hu, Peng Sun, Guo-Qiang Liu and Jun Jiang

Materials Today Physics, 2021, 21, 100544
DOI: 10.1016/j.mtphys.2021.100544

Strong texture in nanostructured bulk Bi0.5Sb1.5Te3 leads to superior thermoelectric and mechanical performance

Hao Zhu, Ziming Deng, Yuhan Qu, Peng He and Huiyuan Geng

Journal of Materials Science & Technology, 2025, 232, 267
DOI: 10.1016/j.jmst.2024.12.086

Wearable Thermoelectric Generators: Materials, Structures, Fabrications, and Applications

Jin Liu, Qiutong Liu, Shuping Lin, Man Yui Leung, Yuan Ma and Xiaoming Tao

Physica Rapid Research Ltrs, 2023, 17
DOI: 10.1002/pssr.202200502

Topological Electronic Transition Contributing to Improved Thermoelectric Performance in p‐Type Mg3Sb2−xBix Solid Solutions

Sen Xie, Xiaolin Wan, Yasong Wu, Chunxia Li, Fan Yan, Yujie Ouyang, Haoran Ge, Xianda Li, Yong Liu, Rui Wang, Michael Y. Toriyama, G. Jeffrey Snyder, Jiong Yang, Qingjie Zhang, Wei Liu and Xinfeng Tang

Advanced Materials, 2024, 36
DOI: 10.1002/adma.202400845

Optimizing the endurance mechanisms of chalcogenide-based thermoelectric materials and devices

Guang-Kun Ren, Luping Song, Ruopu Liu, Li Ma, Yu Tian, Zhijie Wei, Yan Shi, Zhe Zheng, Yiying Zhao and Yuan-Hua Lin

Applied Physics Reviews, 2025, 12
DOI: 10.1063/5.0244411

Micro thermoelectric devices: From principles to innovative applications

Qiulin Liu, Guodong Li, Hangtian Zhu and Huaizhou Zhao

Chinese Phys. B, 2022, 31, 047204
DOI: 10.1088/1674-1056/ac5609

Objective evaluation of wearable thermoelectric generator: From platform building to performance verification

Zhuoming Xu, Dongwang Yang, Xiong Yuan, Siheng Hua, Han You, Yubing Xing, Kai Hu, Jiang Wang, Yani Xiao, Yonggao Yan and Xinfeng Tang

Review of Scientific Instruments, 2022, 93
DOI: 10.1063/5.0087672

Enhanced thermoelectric performance of Cu2SnSe3 by synergic effects via cobalt-doping

Mannv Ding, Chunhua Bai, Yudong Lang, Yifeng Wang, Lin Pan, Xiaohui Hu, Changchun Chen, Shengping He, Kaleem Ahmad and Zeyad Almutairi

Journal of Alloys and Compounds, 2024, 988, 174272
DOI: 10.1016/j.jallcom.2024.174272

Large-scale SHS based 3D printing of high-performance n-type BiTeSe: Comprehensive development from materials to modules

Ruoyu Zhan, Jianan Lyu, Dongwang Yang, Yutian Liu, Siheng Hua, Zhuoming Xu, Cong Wang, Xi Peng, Yonggao Yan and Xinfeng Tang

Materials Today Physics, 2022, 24, 100670
DOI: 10.1016/j.mtphys.2022.100670

High‐Performance Industrial‐Grade p‐Type (Bi,Sb)2Te3 Thermoelectric Enabled by a Stepwise Optimization Strategy

Qiang Zhang, Minhui Yuan, Kaikai Pang, Yuyou Zhang, Ruoyu Wang, Xiaojian Tan, Gang Wu, Haoyang Hu, Jiehua Wu, Peng Sun, Guo‐Qiang Liu and Jun Jiang

Advanced Materials, 2023, 35
DOI: 10.1002/adma.202300338

Cu2Te Incorporation-Induced High Average Thermoelectric Performance in p-Type Bi2Te3 Alloys

Qing Shi, Xuanwei Zhao, Yiyuan Chen, Liwei Lin, Ding Ren, Bo Liu, Chunliang Zhou and Ran Ang

ACS Appl. Mater. Interfaces, 2022, 14, 45582
DOI: 10.1021/acsami.2c13527

Combating the Peltier effect in the plasma-activated sintering process of thermoelectric materials by optimizing raw materials and extending the sintering time

Zhengkai Zhang, Xiaofei Zhang, Zetan Cao and Chengqian Wang

J Mater Sci: Mater Electron, 2025, 36
DOI: 10.1007/s10854-025-15010-8

Enhanced design optimization of micro-thermoelectric cooler in optical module

Yutian Liu, Dongwang Yang, Kechen Tang, Jianan Lyu, Zinan Zhang, Chenyang Li, Yu Zheng, YongZhong Jia, Junhao Li and Yonggao Yan

Solid State Sciences, 2025, 160, 107829
DOI: 10.1016/j.solidstatesciences.2025.107829

Additive manufacturing, topology optimization of thermoelectric generators, and beyond: a comprehensive review on pioneering thermoelectric conversion for a sustainable future

K. Bun, S.S. Rapaka, S. Pathak, A. Date and X. Wang

Applied Thermal Engineering, 2025, 278, 127437
DOI: 10.1016/j.applthermaleng.2025.127437

Atomic-defect-suppressed pristine p-type Bi0.3Sb1.7Te3 as robust high-performance thermoelectrics for power generation and cooling

Qi Zhao, Zhen Fan, Yi Wang, Qiulin Liu, Xuejuan Dong, Xiaowei Wu, Zhicheng Shan, Hangtian Zhu, Zhiliang Li, Shufang Wang and Huaizhou Zhao

Journal of Materiomics, 2025, 11, 101090
DOI: 10.1016/j.jmat.2025.101090

General strategy for developing thick-film micro-thermoelectric coolers from material fabrication to device integration

Xiaowen Sun, Yuedong Yan, Man Kang, Weiyun Zhao, Kaifen Yan, He Wang, Ranran Li, Shijie Zhao, Xiaoshe Hua, Boyi Wang, Weifeng Zhang and Yuan Deng

Nat Commun, 2024, 15
DOI: 10.1038/s41467-024-48346-6

Influence of lattice strain on the mechanical properties of CoSb3 skutterudites

Jialiang Li, Xiaolian Zhang, Bo Duan, Guodong Li, Yuxi Ma and Hao Xu

Materials Today Communications, 2024, 38, 107761
DOI: 10.1016/j.mtcomm.2023.107761

Synergistically Optimized Thermoelectric and Mechanical Properties in p‐Type BiSbTe by a Microdroplet Deposition Technique

Haoyang Hu, Xiaojian Tan, Zhe Guo, Hongxiang Wang, Zhilong Zhou, Chenglong Xiong, Zhixiang Li, Guoqiang Liu, Jacques G. Noudem and Jun Jiang

Energy Tech, 2021, 9
DOI: 10.1002/ente.202001024

Unraveling the Origin of Donor‐Like Effect in Bismuth–Telluride‐Based Thermoelectric Materials

Feng Liu, Min Zhang, Pengfei Nan, Xin Zheng, Yuzheng Li, Kang Wu, Zhongkang Han, Binghui Ge, Xinbing Zhao, Chenguang Fu and Tiejun Zhu

Small Science, 2025, 5
DOI: 10.1002/smsc.202300082

Current advances and future perspectives of additive manufacturing for functional polymeric materials and devices

Chuhong Zhang, Yijun Li, Wenbin Kang, Xingang Liu and Qi Wang

SusMat, 2021, 1, 127
DOI: 10.1002/sus2.11

Comprehensive Insight into p-Type Bi2Te3-Based Thermoelectrics near Room Temperature

Qing Shi, Juan Li, Xuanwei Zhao, Yiyuan Chen, Fujie Zhang, Yan Zhong and Ran Ang

ACS Appl. Mater. Interfaces, 2022, 14, 49425
DOI: 10.1021/acsami.2c13109

Melt pool dynamics and microstructural growth prediction of additively manufactured thermoelectric material

Jagannath Suresh, Gagan K. Goyal, Haozheng Wang and Lei Zuo

CIRP Journal of Manufacturing Science and Technology, 2025, 59, 170
DOI: 10.1016/j.cirpj.2025.03.004

Matrix plainification leads to high thermoelectric performance in plastic Cu2Se/SnSe composites

Pan Ying, Qingyang Jian, Yaru Gong, Tong Song, Yuxuan Yang, Yang Geng, Junquan Huang, Rongxin Sun, Chen Chen, Tao Shen, Yanan Li, Wei Dou, Congmin Liang, Yuqi Liu, Deshang Xiang, Tao Feng, Xiaoyu Fei, Yongsheng Zhang, Kun Song, Yang Zhang, Haijun Wu and Guodong Tang

Nat Commun, 2025, 16
DOI: 10.1038/s41467-025-58484-0

High thermoelectric properties realized in earth abundant Bi2S3 bulk materials via Se and Cl co-doping in solution synthesis process

Jun Guo, Yu-Ke Zhu, Lin Chen, Zi-Yuan Wang, Zhen-Hua Ge and Jing Feng

Journal of Materials Science & Technology, 2022, 100, 51
DOI: 10.1016/j.jmst.2021.05.057

Optimization of Mechanical and Thermoelectric Properties of SnTe‐Based Semiconductors by Mn Alloying Modulated Precipitation Evolution

Houjiang Yang, Luoqi Wu, Xiaobin Feng, Hongtao Wang, Xiege Huang, Bo Duan, Guodong Li, Pengcheng Zhai and Qingjie Zhang

Small, 2024, 20
DOI: 10.1002/smll.202310692

Cu2Se-based thermoelectric cellular architectures for efficient and durable power generation

Seungjun Choo, Faizan Ejaz, Hyejin Ju, Fredrick Kim, Jungsoo Lee, Seong Eun Yang, Gyeonghun Kim, Hangeul Kim, Seungki Jo, Seongheon Baek, Soyoung Cho, Keonkuk Kim, Ju-Young Kim, Sangjoon Ahn, Han Gi Chae, Beomjin Kwon and Jae Sung Son

Nat Commun, 2021, 12
DOI: 10.1038/s41467-021-23944-w

Direct Ink Writing (3D Printing) of Robust, Highly Efficient, Double‐Half‐Heusler Thermoelectric High‐Entropy Alloy

Bifa Shimelis Haile, Varinder Pal, Tapas Pal, Surbhi Slathia, Gemechis Megersa Jigi, Solomon Demiss Negedu, Nishant Tiwari, Himanshu Singh, Antony Joseph, Femi Emmanuel Olu and Chandra Sekhar Tiwary

Adv Eng Mater, 2025, 27
DOI: 10.1002/adem.202402283

3D Printing of Bi2Te3-Based Thermoelectric Materials with High Performance and Shape Controllability

Qiujun Hu, Ding Luo, Junbiao Guo and Wenbin Qiu

ACS Appl. Mater. Interfaces, 2023, 15, 38623
DOI: 10.1021/acsami.3c08116

Roadmap for Power Generation of Industrial Hot Extruded Bi2Te3-Based Thermoelectric Device in Real-World Heat Sources

Weiqiang Cao, Ziao Wang, Dongwang Yang, Yonggao Yan, Xianli Su and Xinfeng Tang

ACS Appl. Mater. Interfaces, 2024, 16, 65058
DOI: 10.1021/acsami.4c16245

In situ nitriding of Fe2VAl during laser surface remelting to manipulate microstructure and crystalline defects

Leonie Gomell, Shao-Pu Tsai, Moritz Roscher, Ruben Bueno Villoro, Peter Konijnenberg, Stefan Zaefferer, Christina Scheu and Baptiste Gault

Phys. Rev. Materials, 2022, 6
DOI: 10.1103/PhysRevMaterials.6.085405

Exceptional thermoelectric and mechanical performance in (Bi, Sb)2Te3 matrix facilitated by AgInSe2 alloying

Ruiheng Li, Wenxin Ou, Jianglong Zhu, Qian Deng, Xiaobo Tan, Qi Zhao, Tianbo Lu, Shaojingya Gao, Huangshui Ma, Hao Wu, Qiang Sun and Ran Ang

Chemical Engineering Journal, 2024, 497, 154624
DOI: 10.1016/j.cej.2024.154624

Lattice Regularization by Manipulating Over‐Stoichiometric Defects Yields High‐Performance (Bi,Sb)2Te3 Thermoelectrics

Ruyuan Li, Qiaoyan Pan, Qiang Zhang, Min Wang, Kaikai Pang, Liya Miao, Xiaojian Tan, Haoyang Hu, Jiehua Wu, Guo‐Qiang Liu and Jun Jiang

Small, 2025, 21
DOI: 10.1002/smll.202408794

Inorganic thermoelectric semiconductors with room temperature plasticity

Yuechu Wang, Chenguang Fu, Xun Shi, Lidong Chen and Tiejun Zhu

Applied Physics Letters, 2024, 125
DOI: 10.1063/5.0233358

Heat‐Dissipation Design and 3D Printing of Ternary Silver Chalcogenide‐Based Thermoelectric Legs for Enhancing Power Generation Performance

Keonkuk Kim, Seungjun Choo, Jungsoo Lee, Hyejin Ju, Soo‐ho Jung, Seungki Jo, So‐Hyeon Lee, Seongheon Baek, Ju‐Young Kim, Kyung Tae Kim, Han Gi Chae and Jae Sung Son

Advanced Science, 2024, 11
DOI: 10.1002/advs.202402934

Flexible Thermoelectric Double‐Layer Inorganic/Organic Composites Synthesized by Additive Manufacturing

Yong Du, Jiageng Chen, Qiufeng Meng, Jiayue Xu, Jun Lu, Biplab Paul and Per Eklund

Adv Elect Materials, 2020, 6
DOI: 10.1002/aelm.202000214

Recyclable, Healable, and Stretchable High‐Power Thermoelectric Generator

Pengcheng Zhu, Chuanqian Shi, Yalong Wang, Yaling Wang, Yuedong Yu, Yao Wang, Yuan Deng and Jianliang Xiao

Advanced Energy Materials, 2021, 11
DOI: 10.1002/aenm.202100920

Additive manufacturing of ceramic materials for energy applications: Road map and opportunities

Corson L. Cramer, Emanuel Ionescu, Magdalena Graczyk-Zajac, Andrew T. Nelson, Yutai Katoh, Jeffery J. Haslam, Lothar Wondraczek, Trevor G. Aguirre, Saniya LeBlanc, Hsin Wang, Mansour Masoudi, Ed Tegeler, Ralf Riedel, Paolo Colombo and Majid Minary-Jolandan

Journal of the European Ceramic Society, 2022, 42, 3049
DOI: 10.1016/j.jeurceramsoc.2022.01.058

Promoting p‐Type PbS as Efficient Candidates for Thermoelectric Cooling and Power Generation

Suyao Liu, Shulin Bai, Tian Gao, Dongrui Liu, Yu Tian, Yichen Li, Jiayi Peng, Dezheng Gao, Siqi Wang, Lizhong Su, Bingchao Qin and Li‐Dong Zhao

Adv Funct Materials, 2025
DOI: 10.1002/adfm.202516306

Developments and prospects of additive manufacturing for thermoelectric materials and technologies

Ahmad Baroutaji, Arun Arjunan, John Robinson, Mohamad Ramadan, Mohammad Ali Abdelkareem, Aaron Vance, Abul Arafat and Abdul-Ghani Olabi

Sustainable Materials and Technologies, 2024, 41, e01008
DOI: 10.1016/j.susmat.2024.e01008

Defect Engineering Advances Thermoelectric Materials

Chunlu Wu, Xiao-Lei Shi, Lijun Wang, Wanyu Lyu, Pei Yuan, Lina Cheng, Zhi-Gang Chen and Xiangdong Yao

ACS Nano, 2024, 18, 31660
DOI: 10.1021/acsnano.4c11732

Achieving superior performance in thermoelectric Bi0.4Sb1.6Te3.72 by enhancing texture and inducing high-density line defects

Junhao Qiu, Yonggao Yan, Hongyao Xie, Tingting Luo, Fanjie Xia, Lei Yao, Min Zhang, Ting Zhu, Gangjian Tan, Xianli Su, Jinsong Wu, Ctirad Uher, Hongyi Jiang and Xinfeng Tang

Sci. China Mater., 2021, 64, 1507
DOI: 10.1007/s40843-020-1548-x

Enhanced electrical and mechanical properties of Bi2Te3-based thermoelectric thick films enabled by a practical dynamic regulation strategy

Jie Zhou, Wei Zhu, Qingqing Zhang, Guangyu Han, YuTong Liu, Zhanpeng Guo, Siming Guo, Yue Huang and Yuan Deng

Journal of Materiomics, 2024, 10, 480
DOI: 10.1016/j.jmat.2023.07.010

BiSbSe3: A promising Te-free thermoelectric material

Sining Wang, Yuting Qiu and Li-Dong Zhao

Applied Physics Letters, 2023, 122
DOI: 10.1063/5.0159352

Realizing high-efficiency thermoelectric module by suppressing donor-like effect and improving preferred orientation in n-type Bi2(Te, Se)3

Yichen Li, Shulin Bai, Yi Wen, Zhe Zhao, Lei Wang, Shibo Liu, Junqing Zheng, Siqi Wang, Shan Liu, Dezheng Gao, Dongrui Liu, Yingcai Zhu, Qian Cao, Xiang Gao, Hongyao Xie and Li-Dong Zhao

Science Bulletin, 2024, 69, 1728
DOI: 10.1016/j.scib.2024.04.034

Synergistic Optimization of the Thermoelectric Performance of Cu22Sn10S32 through Doping and Nanostructure Engineering

Xiangbin Chen, Qixian Zheng, Xiang Qu, Tian Yu, Ning Qi and Zhiquan Chen

ACS Appl. Energy Mater., 2025, 8, 3846
DOI: 10.1021/acsaem.5c00115

Room-temperature thermoelectric materials: Challenges and a new paradigm

Zhijia Han, Jing-Wei Li, Feng Jiang, Jiating Xia, Bo-Ping Zhang, Jing-Feng Li and Weishu Liu

Journal of Materiomics, 2022, 8, 427
DOI: 10.1016/j.jmat.2021.07.004

Effective Diffusion Barrier Layer Achieves Thermal Stability for n-Type Bi2Te2.7Se0.3 Thermoelectric Generators

Min Liu, Xinyue Zhang, Shanshan Hu, Rui Zhou, Yu Guo and Wen Li

ACS Appl. Mater. Interfaces, 2025, 17, 28873
DOI: 10.1021/acsami.5c03193

High Performance Thermoelectric Power of Bi0.5Sb1.5Te3Through Synergistic Cu2GeSe3and Se Incorporations

Kaikai Pang, Minhui Yuan, Qiang Zhang, Yanan Li, Yuyou Zhang, Wenjie Zhou, Gang Wu, Xiaojian Tan, Jacques G. Noudem, Chen Cui, Haoyang Hu, Jiehua Wu, Peng Sun, Guo‐Qiang Liu and Jun Jiang

Small, 2024, 20
DOI: 10.1002/smll.202306701

Lattice Architectures for Thermoelectric Energy Harvesting

Danwei Zhang, Natalie Ngoh Yen Qi, Samantha Faye Duran Solco, Xinwei Li and Ady Suwardi

ACS Energy Lett., 2024, 9, 2240
DOI: 10.1021/acsenergylett.4c00680

All-Day Uninterrupted Power Generator: Harvesting Energy from the Sun and Cold Space

Shuai Zhang, Zhenhua Wu, Zekun Liu, Erzhen Mu, Yang Liu, Yongbo Lv, Thomas Thundat and Zhiyu Hu

SSRN Journal, 2021
DOI: 10.2139/ssrn.3965584

A synergistic approach to optimizing the performance of a concentrating solar segmented variable area leg thermoelectric generator using numerical methods and neural networks

Hisham Alghamdi, Chika Maduabuchi, Abdullah Albaker, Ibrahim Alatawi, Theyab R. Alsenani, Ahmed S. Alsafran, Mohammed AlAqil and Mohammad Alkhedher

J Therm Anal Calorim, 2024, 149, 5341
DOI: 10.1007/s10973-024-13159-8

Enhanced Electrical Properties of 3D Printed Bi2Te3-Based Thermoelectric Materials via Hot Isostatic Pressing

Seungki Jo

Ceramist, 2025, 28, 126
DOI: 10.31613/ceramist.2025.00045

Thermoelectric Silver‐Based Chalcogenides

Si Yin Tee, Daniel Ponsford, Chee Leng Lay, Xiaobai Wang, Xizu Wang, Darren Chi Jin Neo, Tianze Wu, Warintorn Thitsartarn, Jayven Chee Chuan Yeo, Guijian Guan, Tung‐Chun Lee and Ming‐Yong Han

Advanced Science, 2022, 9
DOI: 10.1002/advs.202204624

Toughening Thermoelectric Materials: From Mechanisms to Applications

Luoqi Wu, Xiaobin Feng, Ke Cao and Guodong Li

IJMS, 2023, 24, 6325
DOI: 10.3390/ijms24076325

Heterogeneous Interface Microstructure and Thermoelectromagnetic Conversion Performance of BiSbTe/MnCoGe Multifunctional Materials

Longli Wang, Rongcheng Li, Peilin Miao, Jiushun Zhu, Gangjian Tan and Xinfeng Tang

Acta Metall. Sin. (Engl. Lett.), 2025, 38, 839
DOI: 10.1007/s40195-025-01854-w

Composition-segmented BiSbTe thermoelectric generator fabricated by multimaterial 3D printing

Seong Eun Yang, Fredrick Kim, Faizan Ejaz, Gi Seung Lee, Hyejin Ju, Seungjun Choo, Jungsoo Lee, Gyeonghun Kim, Soo-ho Jung, Sangjoon Ahn, Han Gi Chae, Kyung Tae Kim, Beomjin Kwon and Jae Sung Son

Nano Energy, 2021, 81, 105638
DOI: 10.1016/j.nanoen.2020.105638

Processing of Thermoelectric Fe2VAl Heusler-compounds by laser powder bed fusion: From single scan tracks to bulk material

M. Delcroix, G. Roy, C. van der Rest, V. Marchal-Marchant and P.J. Jacques

Additive Manufacturing Letters, 2025, 14, 100305
DOI: 10.1016/j.addlet.2025.100305

3D printed energy devices: generation, conversion, and storage

Jin-ho Son, Hongseok Kim, Yoonseob Choi and Howon Lee

Microsyst Nanoeng, 2024, 10
DOI: 10.1038/s41378-024-00708-2

Advanced porous thermoelectric materials: Design, construction, and application

Ruoyan Li, Bangzhi Ge and Chongjian Zhou

Nano Research, 2025, 18, 94907308
DOI: 10.26599/NR.2025.94907308

Rapid Solidification Effects in Additively Manufactured Si and SiGe Compositions

Holden C. Hyer, Mahmut Nedim Cinbiz, Hsin Wang, Mike Zach and Bradley R. Johnson

ACS Appl. Eng. Mater., 2025, 3, 2365
DOI: 10.1021/acsaenm.5c00288

Low-cost p-type Bi2Te2.7Se0.3 zone-melted thermoelectric materials for solid-state refrigeration

Qi Zhang, Renshuang Zhai, Teng Fang, Kaiyang Xia, Yehao Wu, Feng Liu, Xinbing Zhao and Tiejun Zhu

Journal of Alloys and Compounds, 2020, 831, 154732
DOI: 10.1016/j.jallcom.2020.154732

Bismuth Telluride Supported Sub-1 nm Polyoxometalate Cluster for High-Efficiency Thermoelectric Energy Conversion

Wei Zhao, Kangpeng Jin, Pengfei Xu, Fanshi Wu, Liangwei Fu and Biao Xu

Nano Lett., 2024, 24, 5361
DOI: 10.1021/acs.nanolett.4c01304

Multifunctional durable solid-state thermoelectric sensor enabled by interstitial Co doping in Mg3(Sb, Bi)2

Bangzhou Tian, Huangshui Ma, Xiang An, Yuanqing Mao, Qian Deng, Qiang Sun and Ran Ang

Device, 2024, 2, 100524
DOI: 10.1016/j.device.2024.100524

Micro- and Nano-structures Formed in Silicon Germanium Undergoing Laser Melting for Additive Manufacturing

Ryan Welch, Bengisu Şişik and Saniya LeBlanc

JOM, 2025, 77, 793
DOI: 10.1007/s11837-024-06941-4

3D-Printed Porous Thermoelectrics for In Situ Energy Harvesting

Danwei Zhang, Xiu Jun Genevieve Lim, Xinwei Li, Kivanc Saglik, Samantha Faye Duran Solco, Xian Yi Tan, Yihao Leow, Wei Zhai, Chee Kiang Ivan Tan, Jianwei Xu and Ady Suwardi

ACS Energy Lett., 2023, 8, 332
DOI: 10.1021/acsenergylett.2c02425

Fracture toughness of thermoelectric materials

Guodong Li, Qi An, Bo Duan, Leah Borgsmiller, Muath Al Malki, Matthias Agne, Umut Aydemir, Pengcheng Zhai, Qingjie Zhang, Sergey I. Morozov, William A. Goddard and G. Jeffrey Snyder

Materials Science and Engineering: R: Reports, 2021, 144, 100607
DOI: 10.1016/j.mser.2021.100607

Enhanced Thermoelectric Properties of p-Type Bi0.5Sb1.5Te3-Cu8GeSe6 Composite Materials

Yifeng Tong, Wenjie Huang, Xiaojian Tan, Longbing Yi, Shuai Zhuang, Jiehua Wu, Kun Song, Guoqiang Liu, Genlin Zhang and Jun Jiang

ACS Appl. Mater. Interfaces, 2022, 14, 55780
DOI: 10.1021/acsami.2c17532

Mediating Point Defects Endows n‐Type Bi2Te3 with High Thermoelectric Performance and Superior Mechanical Robustness for Power Generation Application

Yu‐Ke Zhu, Yuxin Sun, Jianbo Zhu, Kun Song, Zihang Liu, Ming Liu, Muchun Guo, Xingyan Dong, Fengkai Guo, Xiaojian Tan, Bo Yu, Wei Cai, Jun Jiang and Jiehe Sui

Small, 2022, 18
DOI: 10.1002/smll.202201352

General design of high-performance and textured layered thermoelectric materials via stacking of mechanically exfoliated crystals

Yu-Ke Zhu, Yuxin Sun, Xingyan Dong, Li Yin, Ming Liu, Muchun Guo, Hao Wu, Fushan Li, Zhentao Guo, Xingyue Wang, Kuai Yu, Fengkai Guo, Qian Zhang, Zihang Liu, Wei Cai and Jiehe Sui

Joule, 2024, 8, 2412
DOI: 10.1016/j.joule.2024.05.006

Cu‐In Co‐Doping and Layered Directional Sintering for High Thermoelectric Efficiency and Mechanical Strength in Bi2(Te,Se)3

Hao Zhu, Ziming Deng, Yuhan Qu, Peng He and Huiyuan Geng

Adv Funct Materials, 2025, 35
DOI: 10.1002/adfm.202422007

Tuning Optimum Temperature Range of Bi2Te3‐Based Thermoelectric Materials by Defect Engineering

Qi Zhang, Teng Fang, Feng Liu, Airan Li, Yehao Wu, Tiejun Zhu and Xinbing Zhao

Chemistry An Asian Journal, 2020, 15, 2775
DOI: 10.1002/asia.202000793

Impact of lattice distortions and overdamped vibrations on the structural properties and thermal transport of strongly anharmonic AgSnSbTe3 crystals

Feng Xiao, Qing-Yu Xie, Ru Yu, Huashan Li, Junrong Zhang and Bao-Tian Wang

Phys. Rev. B, 2025, 111
DOI: 10.1103/PhysRevB.111.184304

Simultaneously enhanced strength and plasticity of Ag2Se-based thermoelectric materials endowed by nano-twinned CuAgSe secondary phase

Jie Chen, Qiang Sun, Deyu Bao, Bang-Zhou Tian, Zegao Wang, Jun Tang, Dali Zhou, Lei Yang and Zhi-Gang Chen

Acta Materialia, 2021, 220, 117335
DOI: 10.1016/j.actamat.2021.117335

Synergistic regulation of texture and low-angle grain boundaries enables mechanically robust p-type Bi2Te3- based compounds with superior thermoelectric performance

Shuo Chen, Tingting Luo, Junjie Li, Lin Liao, Yutian Liu, Zhen Yang, Shenlong Zhong, Jinsong Wu, Xianli Su, Yonggao Yan, Pierre Ferdinand Poudeu Poudeu, Qingjie Zhang and Xinfeng Tang

Materials Today Energy, 2025, 48, 101788
DOI: 10.1016/j.mtener.2024.101788

Thermoelectric materials and devices fabricated by additive manufacturing

Yong Du, Jiageng Chen, Qiufeng Meng, Yunchen Dou, Jiayue Xu and Shirley Z. Shen

Vacuum, 2020, 178, 109384
DOI: 10.1016/j.vacuum.2020.109384

Robust mechanical properties of Ag2Se1–<italic>x</italic>Te<italic>x</italic> thermoelectric materials

Heyang Chen, Shenghong Ren, Hengyang Feng, Tian-Ran Wei, Ling Fu, Zhenyu Pan, Kunpeng Zhao, Xiuyan Li and Xun Shi

NSO, 2025, 4, 20250005
DOI: 10.1360/nso/20250005

Continuous and Intermittent Planetary Ball Milling Effects on the Alloying of a Bismuth Antimony Telluride Powder Mixture

Georgios Samourgkanidis and Theodora Kyratsi

Inorganics, 2023, 11, 221
DOI: 10.3390/inorganics11050221

Enhanced Thermoelectric Performance of p-Type Bi0.5Sb1.5Te3 Nanocomposites Through Nanoflower Morphology

Fang Wu and Wei Wang

J. Electron. Mater., 2022, 51, 508
DOI: 10.1007/s11664-021-09312-w

High‐Efficiency Thermoelectric Module Based on High‐Performance Bi0.42Sb1.58Te3 Materials

Gang Wu, Qiang Zhang, Yuntian Fu, Xiaojian Tan, Jacques G. Noudem, Zongwei Zhang, Chen Cui, Peng Sun, Haoyang Hu, Jiehua Wu, Guo‐Qiang Liu and Jun Jiang

Adv Funct Materials, 2023, 33
DOI: 10.1002/adfm.202305686

Broadening the optimum thermoelectric power generation range of p-type sintered Bi0.4Sb1.6Te3 by suppressing bipolar effect

Zhe Guo, Kun Song, Zipeng Yan, Peng Sun, Xiaojian Tan, Gang Wu, Qiang Zhang, Guo-Qiang Liu, Bo Yu and Jun Jiang

Chemical Engineering Journal, 2021, 426, 131853
DOI: 10.1016/j.cej.2021.131853

Enhanced thermoelectric properties of 3D printed Bi2Te2.7Se0.3 by atomic interface engineering

Qiujun Hu, Junbiao Guo, Xiaomiao Zhao, Chunlong Guan, Shun Wang and Zhiwei Zhao

Journal of Alloys and Compounds, 2024, 1004, 175770
DOI: 10.1016/j.jallcom.2024.175770

Atomic‐resolution Interfacial Microstructure and Thermo‐electro‐magnetic Energy Conversion Performance of Gd/Bi0.5Sb1.5Te3 Composites

Chengshan Liu, Wenjie Xu, Ping Wei, Shaoqiu Ke, Wenjun Cui, Longzhou Li, Dong Liang, Xianfeng Ye, Tiantian Chen, Xiaolei Nie, Wanting Zhu, Wenyu Zhao and Qingjie Zhang

Energy & Environ Materials, 2024, 7
DOI: 10.1002/eem2.12710

Bi2Te3‐Based Thermoelectric Modules for Efficient and Reliable Low‐Grade Heat Recovery

Gang Wu, Qiang Zhang, Xiaojian Tan, Yuntian Fu, Zhe Guo, Zongwei Zhang, Qianqian Sun, Yan Liu, Huilie Shi, Jingsong Li, Jacques. G. Noudem, Jiehua Wu, Guo‐Qiang Liu, Peng Sun, Haoyang Hu and Jun Jiang

Advanced Materials, 2024, 36
DOI: 10.1002/adma.202400285

Re-optimising the thermoelectric properties of BiTeSe by CuO doping: From zone-melting ingots to powder metallurgy bulks with a large size

Wanwan Zhang, Mengyao Li, Yingjiu Zhang, Zengguo Tian, Xin-Jian Li and Hongzhang Song

Journal of Alloys and Compounds, 2024, 993, 174672
DOI: 10.1016/j.jallcom.2024.174672

High-resolution dynamic thermal programming platform based on micro thermoelectric device assisted by laser integrated manufacturing

Chaojie Ren, Wei Zhu, Jie Zhou, Siming Guo, Zhanpeng Guo, Qingqing Zhang, Zhi Li, Man Zhou and Yuan Deng

Nano Energy, 2024, 127, 109794
DOI: 10.1016/j.nanoen.2024.109794

Thermoelectric coolers as thermal management systems for medical applications: Design, optimization, and advancement

Sadeq Hooshmand Zaferani, Michael W. Sams, Reza Ghomashchi and Zhi-Gang Chen

Nano Energy, 2021, 90, 106572
DOI: 10.1016/j.nanoen.2021.106572

High-Performance p-Type Bi2Te3-Based Thermoelectric Materials Enabled via Regulating Bi–Te Ratio

Xiaolei Wang, Hongjing Shang, Hongwei Gu, Yutong Chen, Zhonghua Zhang, Qi Zou, Lin Zhang, Changping Feng, Guicun Li and Fazhu Ding

ACS Appl. Mater. Interfaces, 2024, 16, 11678
DOI: 10.1021/acsami.3c18595

Microstructure evolution during reduction and sintering of 3D-extrusion-printed Bi2O3+TeO2 inks to form Bi2Te3

C. Kenel, M.M.F. Al Malki and D.C. Dunand

Acta Materialia, 2021, 221, 117422
DOI: 10.1016/j.actamat.2021.117422

Additive Manufacturing of Thermoelectrics: Emerging Trends and Outlook

Danwei Zhang, Wei Yang Samuel Lim, Solco Samantha Faye Duran, Xian Jun Loh and Ady Suwardi

ACS Energy Lett., 2022, 7, 720
DOI: 10.1021/acsenergylett.1c02553

Recent Progress on Diamondoid Cu2SnSe3 Thermoelectric Materials: A Review

Pengpeng Chen, Hongyao Xie and Li-Dong Zhao

Acta Metall. Sin. (Engl. Lett.), 2025, 38, 707
DOI: 10.1007/s40195-024-01798-7

Synergistically enhanced thermoelectric and mechanical performance of Bi2Te3 via industrial scalable hot extrusion method for cooling and power generation applications

Tianbo Lu, Boyi Wang, Guodong Li, Jiawei Yang, Xiaofan Zhang, Nan Chen, Te-Huan Liu, Ronggui Yang, Pingjuan Niu, Zongxiang Kan, Hangtian Zhu and Huaizhou Zhao

Materials Today Physics, 2023, 32, 101035
DOI: 10.1016/j.mtphys.2023.101035

Predictable thermoelectric performance of directly synthesized Bi0.5Sb1.5Te3 using laser powder bed fusion additive manufacturing

Jianxu Shi, Zhiqiang Tong, Chunjiang Wang, Bobo Li, Shengli Cao, Yihui Hu, Zhicang Wang and Jun Peng

Ceramics International, 2024, 50, 2921
DOI: 10.1016/j.ceramint.2023.11.035

Enhancing Thermoelectric Performance of AgSbTe2-Based Compounds via Microstructure Modulation Combining with Entropy Engineering

Yutian Wu, Qi Liang, Xiaodie Zhao, Huijuan Wu, Peng Zi, Qirui Tao, Lingxiao Yu, Xianli Su, Jinsong Wu, Zhiquan Chen, Qingjie Zhang and Xinfeng Tang

ACS Appl. Mater. Interfaces, 2022, 14, 3057
DOI: 10.1021/acsami.1c21252

Direct Melt‐Calendaring of Highly Textured (Bi,Sb)2Te3 Thick Films: Superior Thermoelectric and Mechanical Performance via Strain Engineering

Siming Guo, Wei Zhu, Guangyu Han, Qingqing Zhang, Jie Zhou, Zhanpeng Guo, Shucheng Bao, Yutong Liu, Shijie Zhao, Boyi Wang and Yuan Deng

Small Methods, 2024, 8
DOI: 10.1002/smtd.202400589

Enhancing the Thermoelectric and Mechanical Properties of Bi0.5Sb1.5Te3 Modulated by the Texture and Dense Dislocation Networks

Junhao Qiu, Tingting Luo, Yonggao Yan, Fanjie Xia, Lei Yao, Xiaoming Tan, Dongwang Yang, Gangjian Tan, Xianli Su, Jinsong Wu and Xinfeng Tang

ACS Appl. Mater. Interfaces, 2021, 13, 58974
DOI: 10.1021/acsami.1c19172

Recent progress in 3D printing of Bi2Te3-based thermoelectric materials and devices

S E Yang, H Han and J S Son

J. Phys. Energy, 2024, 6, 022003
DOI: 10.1088/2515-7655/ad3983

Experimental optimization of small–scale structure–adjustable radioisotope thermoelectric generators

Kai Liu, Xiaobin Tang, Yunpeng Liu, Zhiheng Xu, Zicheng Yuan, Dongxiao Ji and Seeram Ramakrishna

Applied Energy, 2020, 280, 115907
DOI: 10.1016/j.apenergy.2020.115907

3D printing of bulk thermoelectric materials: Laser powder bed fusion of N-type silicon germanium

Maxime Baudry, Guillaume Savelli and Guilhem Roux

Materials Science and Engineering: B, 2023, 298, 116897
DOI: 10.1016/j.mseb.2023.116897

Experimental and modeling analysis of p-type Bi0.4Sb1.6Te3 and graphene nanocomposites

Aicha S. Lemine, Farah M. El-Makaty, Hana A. Al-Ghanim and Khaled M. Youssef

Journal of Materials Research and Technology, 2022, 16, 1702
DOI: 10.1016/j.jmrt.2021.12.096

Recent Progress on Quaternary Copper-based Diamondoid Thermoelectric Materials

Hongyao Xie and Li-Dong Zhao

MatLab, 2024, 3
DOI: 10.54227/mlab.20240005

Magnetic switching driven by spin–orbit torque in topological-insulator-based (Bi0.5Sb0.5)2Te3/Ta/CoFe/Cu/CoFe/IrMn heterostructure

Tong Zhou, Shaoting Wang, Zherui Zhang, Lanping He, Yang Jiang, Yijun Yao, Xiaobo Tao, Hui Zhang, Weifeng Ge, Huaili Qiu and Yuanjun Yang

Journal of Applied Physics, 2024, 135
DOI: 10.1063/5.0203100

Advances in the design and assembly of flexible thermoelectric device

Tianyi Cao, Xiao-Lei Shi and Zhi-Gang Chen

Progress in Materials Science, 2023, 131, 101003
DOI: 10.1016/j.pmatsci.2022.101003

3D Soft Architectures for Stretchable Thermoelectric Wearables with Electrical Self‐Healing and Damage Tolerance

Youngshang Han, Halil Tetik and Mohammad H. Malakooti

Advanced Materials, 2024, 36
DOI: 10.1002/adma.202407073

Constructing high-performance bulk thermoelectric composites by incorporating uniformly dispersed fullerene sub-nanoclusters

Fanshi Wu, Yifan Shi, Wanjia Zhang, Wei Zhao, Hao Yang, Wenxin Lai, Yue Lou, Zhenhua Yan, Zhan Shi, Zhenhua Ge, Xiyang Wang, Liangwei Fu and Biao Xu

Acta Materialia, 2025, 283, 120540
DOI: 10.1016/j.actamat.2024.120540

Multi-factor design of radioisotope thermoelectric generators: an extensive review

Yongjia Wu, Zhaojun Chen, Peng Zhang, Wenqian Liu, Dongcheng Liu and Tingzhen Ming

Applied Thermal Engineering, 2025, 280, 128045
DOI: 10.1016/j.applthermaleng.2025.128045

Revealing interfacial degradation of Bi2Te3-based micro thermoelectric device under current shocks

Jianan Lyu, Dongwang Yang, Mingqi Zhang, Yutian Liu, Ziao Wang, Zinan Zhang, Gang Zhan, Chenyang Li, Yuting Wang, Weijie Gou, Yunfei Gao, Chengyu Li, Jinsong Wu, Xinfeng Tang and Yonggao Yan

Materials Today Physics, 2024, 48, 101569
DOI: 10.1016/j.mtphys.2024.101569

Carriers: the Less, the Faster

Lidong Zhao

MatLab, 2022, 1, 1
DOI: 10.54227/mlab.20220004

High conversion efficiency of a thermoelectric generator attributed to consistency of material parameters

Kun Song, Xiang Ling, Shuang Wang, Meihua Huang, Qiang Zhang, Zhe Guo, Lidong Chen, Wei Zhao, Zhijie Liu, Yiwei Duan, Jun Jiang and Peter Schiavone

Z. Angew. Math. Phys., 2025, 76
DOI: 10.1007/s00033-025-02500-2

Screening Weldable Metal Electrodes for Ag2Se Thermoelectric Devices below 300 °C

Min Liu, Xinyue Zhang, Wenjun Ding and Yanzhong Pei

ACS Appl. Mater. Interfaces, 2024, 16, 31826
DOI: 10.1021/acsami.4c05134

Rapid Selective Ablation and High-Precision Patterning for Micro-Thermoelectric Devices Using Femtosecond Laser Directing Writing

Jie Zhou, Wei Zhu, Yujie Xie, Yuedong Yu, Zhanpeng Guo, Qingqing Zhang, Yutong Liu and Yuan Deng

ACS Appl. Mater. Interfaces, 2022, 14, 3066
DOI: 10.1021/acsami.1c21326

Thermal and mechanical stability of microwave sintered cold compact bismuth telluride thermoelectric material

Farheen F. Jaldurgam, Zubair Ahmad, Farid Touati, Abdullah Al Ashraf, Jolly Bhadra, Talal Altahtamouni and Noora J. Al-Thani

Materials Today Communications, 2022, 31, 103345
DOI: 10.1016/j.mtcomm.2022.103345

Recovery and thermoelectric performance optimization of p-type bismuth telluride waste by secondary zone-melting

Kai Fu, Jian Yu, Bo Wang, Xiaolei Nie, Wanting Zhu, Ping Wei, Wenyu Zhao and Qingjie Zhang

J Mater Sci: Mater Electron, 2024, 35
DOI: 10.1007/s10854-024-12097-3

Magnesium-based thermoelectric materials and modules for low-temperature applications (below 300°C)

Ran He, Pingjun Ying, Shuo Chen, Zhifeng Ren and Kornelius Nielsch

MRS Bulletin, 2025, 50, 956
DOI: 10.1557/s43577-025-00939-2

Thermal Stability and Mechanical Response of Bi2Te3-Based Materials for Thermoelectric Applications

Yun Zheng, Xian Yi Tan, Xiaojuan Wan, Xin Cheng, Zhihong Liu and Qingyu Yan

ACS Appl. Energy Mater., 2020, 3, 2078
DOI: 10.1021/acsaem.9b02093

Enhanced thermoelectric performance and mechanical strength of n-type BiTeSe materials produced via a composite strategy

Guangsai Yang, Lina Sang, David R.G. Mitchell, Frank Fei Yun, Khay Wai See, Al Jumlat Ahmed, Sepidar Sayyar, Abuduliken Bake, Peng Liu, Lei Chen, Zengji Yue, David Cortie and Xiaolin Wang

Chemical Engineering Journal, 2022, 428, 131205
DOI: 10.1016/j.cej.2021.131205

Exploring the barriers in medical additive manufacturing from an emerging economy

Virendra Kumar Verma, Sachin S. Kamble, L. Ganapathy, Venkatesh Mani, Amine Belhadi and Yangyan Shi

Production Planning & Control, 2023, 1
DOI: 10.1080/09537287.2023.2275694

Lattice Plainification Leads to High Thermoelectric Performance of P‐Type PbSe Crystals

Shibo Liu, Yi Wen, Shulin Bai, Haonan Shi, Yongxin Qin, Bingchao Qin, Dongrui Liu, Qian Cao, Xiang Gao, Lizhong Su, Cheng Chang, Xiao Zhang and Li‐Dong Zhao

Advanced Materials, 2024, 36
DOI: 10.1002/adma.202401828

Direct ink writing of Bi2Te3-based thermoelectric materials induced by rheological design

Zhengshang Wang, Wen Cui, Hao Yuan, Xiaoli Kang, Zhou Zheng, Wenbin Qiu, Qiujun Hu, Jun Tang and Xudong Cui

Materials Today Energy, 2023, 31, 101206
DOI: 10.1016/j.mtener.2022.101206

The Mechanical Properties of Inorganic Thermoelectric Materials: A Review on Characterization Methods and Correlations

Gilad M. Guttmann, Shlomo Haroush and Yaniv Gelbstein

ChemNanoMat, 2022, 8
DOI: 10.1002/cnma.202200203

Nano‐ and Micro‐Structures Formed during Laser Processing of Selenium Doped Bismuth Telluride

Ryan Welch, Dean Hobbis, Andrew J. Birnbaum, George Nolas and Saniya LeBlanc

Adv Materials Inter, 2021, 8
DOI: 10.1002/admi.202100185

A comprehensive review on Bi2Te3‐based thin films: Thermoelectrics and beyond

Xinfeng Tang, Ziwei Li, Wei Liu, Qingjie Zhang and Ctirad Uher

Interdisciplinary Materials, 2022, 1, 88
DOI: 10.1002/idm2.12009

Preparation and In‐Situ High‐Throughput Screening of Bi Thixotropic Ink

Lei Yao, Zhuoming Xu, Junhao Qiu, Jian Zhang, Dongwang Yang, Yonggao Yan and Xinfeng Tang

Adv Materials Inter, 2022, 9
DOI: 10.1002/admi.202101691

Low cost Ni-based electrodeposited pn-junction thermoelectric device for thermoelectric sensor application

L. Banupriya, R.N. Emerson and G. Josemin Bala

Solid-State Electronics, 2025, 225, 109065
DOI: 10.1016/j.sse.2025.109065

Printed Thermoelectrics

Matthew Burton, Geraint Howells, Jonathan Atoyo and Matthew Carnie

Advanced Materials, 2022, 34
DOI: 10.1002/adma.202108183

A new rapid synthesis of thermoelectric Sb2Te3 ingots using selective laser melting 3D printing

Jianxu Shi, Xiaoming Chen, Wanjun Wang and Hualing Chen

Materials Science in Semiconductor Processing, 2021, 123, 105551
DOI: 10.1016/j.mssp.2020.105551

Redesign high-performance flexible thermoelectrics: From mathematical algorithm to artificial cracks

Yi Zhou, Zuteng Guo and Jiaqing He

Applied Physics Letters, 2020, 116
DOI: 10.1063/1.5132827

Additive manufacturing of thermoelectric materials: materials, synthesis and manufacturing: a review

Jiang Bi, Zeqi Liu, Bo Li, Shide Li, Zhuoyun Yang, Mikhail Dmitrievich Starostenkov and Guojiang Dong

J Mater Sci, 2024, 59, 359
DOI: 10.1007/s10853-023-08953-y

2022 roadmap on 3D printing for energy

Albert Tarancón, Vincenzo Esposito, Marc Torrell, Marcel Di Vece, Jae Sung Son, Poul Norby, Sourav Bag, Patrick S Grant, A Vogelpoth, S Linnenbrink, M Brucki, T Schopphoven, A Gasser, Elif Persembe, Dionysia Koufou, Simon Kuhn, Rob Ameloot, Xu Hou, Kurt Engelbrecht, Christian R H Bahl, Nini Pryds, Jie Wang, Costas Tsouris, Eduardo Miramontes, Lonnie Love, Canhai Lai, Xin Sun, Martin Ryhl Kærn, Gennaro Criscuolo and David Bue Pedersen

J. Phys. Energy, 2022, 4, 011501
DOI: 10.1088/2515-7655/ac483d

3D-Printed Geometrical-Optimized Bridge-Type Thermoelectric Generators with a High Output Power and Mechanical Robustness

Xinyuan Tang, Junbiao Guo, Hanyu Zhong, Yuxi Zhan, Lei Yang, Shaojingya Gao and Qiang Sun

ACS Appl. Mater. Interfaces, 2025, 17, 48492
DOI: 10.1021/acsami.5c11274

Boosting thermoelectric performance of n-type Bi2Te2.7Se0.3 alloy by 3D printing induced in-situ texture engineering

Qiujun Hu, Wenbin Qiu, Junbiao Guo, Xiaoyong Wu, Lu Wu and Jun Tang

Journal of Alloys and Compounds, 2023, 937, 168172
DOI: 10.1016/j.jallcom.2022.168172

Thickness-dependent electronic transport induced by in situ transformation of point defects in MBE-grown Bi2Te3 thin films

Min Zhang, Wei Liu, Cheng Zhang, Junhao Qiu, Sen Xie, Fuqiang Hua, Yu Cao, Zhi Li, Hongyao Xie, Ctirad Uher and Xinfeng Tang

Applied Physics Letters, 2020, 117
DOI: 10.1063/5.0025828

Smart Textiles for Electricity Generation

Guorui Chen, Yongzhong Li, Michael Bick and Jun Chen

Chem. Rev., 2020, 120, 3668
DOI: 10.1021/acs.chemrev.9b00821

Promising transparent and flexible thermoelectric modules based on p-type CuI thin films—A review

Aicha S. Lemine, Jolly Bhadra, Noora J. Al-Thani and Zubair Ahmad

Energy Reports, 2022, 8, 11607
DOI: 10.1016/j.egyr.2022.09.020

Tellurium‐Free, Sustainable Thermoelectric Device for Mid‐Temperature Waste Heat Recovery

Vaskuri C. S. Theja, Vaithinathan Karthikeyan, Sanjib Nayak, Gopalan Saianand and Vellaisamy A. L. Roy

Carbon Energy, 2025, 7
DOI: 10.1002/cey2.689

Process-microstructure relationship of laser processed thermoelectric material Bi2Te3

Cagri Oztan, Bengisu Şişik, Ryan Welch and Saniya LeBlanc

Front. Electron. Mater, 2022, 2
DOI: 10.3389/femat.2022.1046694

Three dimensional architected thermoelectric devices with high toughness and power conversion efficiency

Vaithinathan Karthikeyan, James Utama Surjadi, Xiaocui Li, Rong Fan, Vaskuri C. S. Theja, Wen Jung Li, Yang Lu and Vellaisamy A. L. Roy

Nat Commun, 2023, 14
DOI: 10.1038/s41467-023-37707-2

Preparation of vertical corner extrusion and thermoelectric properties of p-type Bi₂Te₃ based materials

Shunqi GAO, Junjie LI, Shuo CHEN, Yonggao YAN, Xianli SU, Qingjie ZHANG and Xinfeng TANG

Acta Phys. Sin., 2025, 74, 117101
DOI: 10.7498/aps.74.20250152

Thermoelectric Performance and Stability of Industrially Zone-Melted P-Type BiSbTe Alloys with High Te Doping

Weiqiang Cao, Jianan Lyu, Ziao Wang, Mingqi Zhang, Yonggao Yan, Dongwang Yang and Xinfeng Tang

ACS Appl. Mater. Interfaces, 2025, 17, 14301
DOI: 10.1021/acsami.5c01688

Geometry and stage number optimization of a concentrating solar multistage segmented thermoelectric generator by exploiting different optimization schemes

Chika Maduabuchi and Mohammad Alobaid

Intl J of Energy Research, 2022, 46, 22926
DOI: 10.1002/er.8595

Ag2Se as a tougher alternative to n-type Bi2Te3 thermoelectrics

Min Liu, Xinyue Zhang, Shuxian Zhang and Yanzhong Pei

Nat Commun, 2024, 15
DOI: 10.1038/s41467-024-50898-6

Realize high thermoelectric properties in n-type Bi2Te2.7Se0.3 materials via ZrO2 ceramic nanoparticles mediated heterogeneous interface

Qiujun Hu, Junbiao Guo and Hanyang Zuo

Ceramics International, 2023, 49, 18371
DOI: 10.1016/j.ceramint.2023.02.209

Synergistically Enhanced Thermoelectric Performance of Cu2SnSe3-Based Composites via Ag Doping Balance

Xin Cheng, Dongwang Yang, Xianli Su, Hongyao Xie, Wei Liu, Yun Zheng and Xinfeng Tang

ACS Appl. Mater. Interfaces, 2021, 13, 55178
DOI: 10.1021/acsami.1c17460

Making High Thermoelectric and Superior Mechanical Performance Nb0.88Hf0.12FeSb Half‐Heusler via Additive Manufacturing

Zhifu Yao, Wenbin Qiu, Chen Chen, Xin Bao, Kaiyi Luo, Yong Deng, Wenhua Xue, Xiaofang Li, Qiujun Hu, Junbiao Guo, Lei Yang, Wenyu Hu, Xiaoyi Wang, Xingjun Liu, Qian Zhang, Katsumi Tanigaki and Jun Tang

Advanced Science, 2024, 11
DOI: 10.1002/advs.202403705

Machine learning and numerical simulations for electrical, thermodynamic, and mechanical assessment of modified solar thermoelectric generators

Mohammad Alobaid, Chika Maduabuchi, Abdullah Albaker, Abdulaziz Almalaq, Mohana Alanazi and Turki Alsuwian

Applied Thermal Engineering, 2023, 220, 119706
DOI: 10.1016/j.applthermaleng.2022.119706

Dense dislocations induced ductile SnTe thermoelectric semiconductor over a wide range of temperatures

Houjiang Yang, Xiege Huang, Bo Duan, Luoqi Wu, Hongtao Wang, Xiaobin Feng, Maoyuan Jiang, Guodong Li, Ling Zhou, Pengcheng Zhai and Qingjie Zhang

Journal of Materials Science & Technology, 2023, 144, 213
DOI: 10.1016/j.jmst.2022.11.003

Smart textiles for self-powered biomonitoring

Junyi Yin, Shaolei Wang, Aiden Di Carlo, Austin Chang, Xiao Wan, Jing Xu, Xiao Xiao and Jun Chen

Med-X, 2023, 1
DOI: 10.1007/s44258-023-00001-3