Shuyin Xu, Jinpeng Wu, Enyuan Hu, Qinghao Li, Jienan Zhang, Yi Wang, Eli Stavitski, Liwei Jiang, Xiaohui Rong, Xiqian Yu, Wanli Yang, Xiao-Qing Yang, Liquan Chen and Yong-Sheng Hu

J. Mater. Chem. A, 2018, 6, 20795
DOI: 10.1039/C8TA07933A

High performance manganese-based layered oxide cathodes: overcoming the challenges of sodium ion batteries

Nagore Ortiz-Vitoriano, Nicholas E. Drewett, Elena Gonzalo and Teófilo Rojo

Energy Environ. Sci., 2017, 10, 1051
DOI: 10.1039/C7EE00566K

Battery and solid oxide fuel cell materials

Emma Kendrick and Peter Slater

Annu. Rep. Prog. Chem., Sect. A: Inorg. Chem., 2012, 108, 424
DOI: 10.1039/c2ic90006h

Improvement on the high-rate performance of Mn-doped Na3V2(PO4)3/C as a cathode material for sodium ion batteries

Wei Shen, Hui Li, Ziyang Guo, Zhihong Li, Qunjie Xu, Haimei Liu and Yonggang Wang

RSC Adv., 2016, 6, 71581
DOI: 10.1039/C6RA16515J

Recent developments in electrode materials for sodium-ion batteries

Luyuan Paul Wang, Linghui Yu, Xin Wang, Madhavi Srinivasan and Zhichuan J. Xu

J. Mater. Chem. A, 2015, 3, 9353
DOI: 10.1039/C4TA06467D

Facile preparation of a Na2MnSiO4/C/graphene composite as a high performance cathode for sodium ion batteries

Hai Zhu, Juntao Wang, Xiaoling Liu and Xiaoming Zhu

RSC Adv., 2017, 7, 14145
DOI: 10.1039/C7RA00198C

Annealed NaV3O8 nanowires with good cycling stability as a novel cathode for Na-ion batteries

Hanna He, Guanhua Jin, Haiyan Wang, Xiaobing Huang, Zehua Chen, Dan Sun and Yougen Tang

J. Mater. Chem. A, 2014, 2, 3563
DOI: 10.1039/c3ta14486k

Na[Ni0.4Fe0.2Mn0.4−xTix]O2: a cathode of high capacity and superior cyclability for Na-ion batteries

Xin Sun, Yi Jin, Chen-Yu Zhang, Jian-Wu Wen, Yu Shao, Yong Zang and Chun-Hua Chen

J. Mater. Chem. A, 2014, 2, 17268
DOI: 10.1039/C4TA03828B

O3–NaxMn1/3Fe2/3O2as a positive electrode material for Na-ion batteries: structural evolutions and redox mechanisms upon Na+(de)intercalation

B. Mortemard de Boisse, J.-H. Cheng, D. Carlier, M. Guignard, C.-J. Pan, S. Bordère, D. Filimonov, C. Drathen, E. Suard, B.-J. Hwang, A. Wattiaux and C. Delmas

J. Mater. Chem. A, 2015, 3, 10976
DOI: 10.1039/C4TA06688J

A layer-structured Na2CoP2O7 pyrophosphate cathode for sodium-ion batteries

Prabeer Barpanda, Jiechen Lu, Tian Ye, Masataka Kajiyama, Sai-Cheong Chung, Naoaki Yabuuchi, Shinichi Komaba and Atsuo Yamada

RSC Adv., 2013, 3, 3857
DOI: 10.1039/c3ra23026k

Adverse effects of interlayer-gliding in layered transition-metal oxides on electrochemical sodium-ion storage

Yang Sun, Shaohua Guo and Haoshen Zhou

Energy Environ. Sci., 2019, 12, 825
DOI: 10.1039/C8EE01006D

A comprehensive review of sodium layered oxides: powerful cathodes for Na-ion batteries

Man Huon Han, Elena Gonzalo, Gurpreet Singh and Teófilo Rojo

Energy Environ. Sci., 2015, 8, 81
DOI: 10.1039/C4EE03192J

Intrinsic enhancement of the rate capability and suppression of the phase transition via p-type doping in Fe–Mn based P2-type cathodes used for sodium ion batteries

Taesoon Hwang, Jin-Myoung Lim, Rye-Gyeong Oh, Woosuk Cho, Maenghyo Cho and Kyeongjae Cho

Phys. Chem. Chem. Phys., 2021, 23, 5438
DOI: 10.1039/D0CP06483A

Three-dimensional hard carbon matrix for sodium-ion battery anode with superior-rate performance and ultralong cycle life

Zhengqiu Yuan, Lulu Si and Xiaobo Zhu

J. Mater. Chem. A, 2015, 3, 23403
DOI: 10.1039/C5TA07223A

Neutron Diffraction and Electrochemical Studies of Na0.79CoO2and Na0.79Co0.7Mn0.3O2Cathodes for Sodium-Ion Batteries

Faith R. Beck, Y. Q. Cheng, Zhonghe Bi, Mikhail Feygenson, Craig A. Bridges, Zachary Moorhead-Rosenberg, Arumugam Manthiram, John B. Goodenough, M. Parans Paranthaman and Ayyakkannu Manivannan

J. Electrochem. Soc., 2014, 161, A961
DOI: 10.1149/2.025406jes

Structural and Electrochemical Characterizations of P2 and New O3-NaxMn1-yFeyO2Phases Prepared by Auto-Combustion Synthesis for Na-Ion Batteries

B. Mortemard de Boisse, D. Carlier, M. Guignard and C. Delmas

J. Electrochem. Soc., 2013, 160, A569
DOI: 10.1149/2.032304jes

Transition metal oxides for sodium-ion batteries

Heng Su, Saddique Jaffer and Haijun Yu

Energy Storage Materials, 2016, 5, 116
DOI: 10.1016/j.ensm.2016.06.005

Roles of Ti in Electrode Materials for Sodium-Ion Batteries

Yuesheng Wang, Wen Zhu, Abdelbast Guerfi, Chisu Kim and Karim Zaghib

Front. Energy Res., 2019, 7
DOI: 10.3389/fenrg.2019.00028

Preparation of M1/3Ni1/3Mn2/3O2 (M=Mg or Zn) and its performance as the cathode material of aqueous divalent cations battery

Ying Zhang, Kui Cheng, Ke Ye, Yinyi Gao, Wenbin Zhao, Guiling Wang and Dianxue Cao

Electrochimica Acta, 2015, 182, 971
DOI: 10.1016/j.electacta.2015.10.008

Effect of Cu substitution on anion redox behaviour in P3-type sodium manganese oxides

Stephanie F Linnell, Alexis G Manche, Yingling Liao, Moritz Hirsbrunner, Saki Imada, Aaron B Naden, John T S Irvine, Laurent C Duda and A Robert Armstrong

J. Phys. Energy, 2022, 4, 044006
DOI: 10.1088/2515-7655/ac95cc

Non-crystalline oligopyrene as a cathode material with a high-voltage plateau for sodium ion batteries

Su Cheol Han, Eun Gyoung Bae, Heatsal Lim and Myoungho Pyo

Journal of Power Sources, 2014, 254, 73
DOI: 10.1016/j.jpowsour.2013.12.104

Ti-doped O3-NaNi0.5Mn0.5O2 as high-performance cathode materials for sodium-ion batteries

Shihe Shi, Bo Yang, Shiwei Bai, Qingrong Chen, Zhijian Liao, Wubo Wan, Jiequn Liu and Shengkui Zhong

Solid State Ionics, 2024, 411, 116554
DOI: 10.1016/j.ssi.2024.116554

Electrochemical and Structural Study of Layered P2‐Type Na2/3Ni1/3Mn2/3O2 as Cathode Material for Sodium‐Ion Battery

Yanfen Wen, Bei Wang, Guang Zeng, Kazuhiro Nogita, Delai Ye and Lianzhou Wang

Chemistry An Asian Journal, 2015, 10, 661
DOI: 10.1002/asia.201403134

Air-Stable NaxTMO2 Cathodes for Sodium Storage

Yi Zhang, Renyuan Zhang and Yunhui Huang

Front. Chem., 2019, 7
DOI: 10.3389/fchem.2019.00335

Natriumionenbatterien für die elektrochemische Energiespeicherung

Dipan Kundu, Elahe Talaie, Victor Duffort and Linda F. Nazar

Angewandte Chemie, 2015, 127, 3495
DOI: 10.1002/ange.201410376

Improving the cyclic stability of MoO2 anode for sodium ion batteries via film-forming electrolyte additive

Wenguang Zhang, Lidan Xing, Jiawei Chen, Hebin Zhou, Shimin Liang, Weiyi Huang and Weishan Li

Journal of Alloys and Compounds, 2020, 822, 153530
DOI: 10.1016/j.jallcom.2019.153530

Cycle performance improvement of NaCrO2 cathode by carbon coating for sodium ion batteries

Jing-Jing Ding, Yong-Ning Zhou, Qian Sun and Zheng-Wen Fu

Electrochemistry Communications, 2012, 22, 85
DOI: 10.1016/j.elecom.2012.06.001

Structure and Electrochemistry of NaxFexTi1-xO2(1.0 ≥ x ≥ 0.75) for Na-Ion Battery Positive Electrodes

J. S. Thorne, S. Chowdhury, R. A. Dunlap and M. N. Obrovac

J. Electrochem. Soc., 2014, 161, A1801
DOI: 10.1149/2.0291412jes

Synthesis and characterization of a new layered cathode material for sodium ion batteries

Siham Doubaji, Mario Valvo, Ismael Saadoune, Mohammed Dahbi and Kristina Edström

Journal of Power Sources, 2014, 266, 275
DOI: 10.1016/j.jpowsour.2014.05.042

Uniform and continuous carbon coated sodium vanadium phosphate cathode materials for sodium-ion battery

Lulu Si, Zhengqiu Yuan, Lei Hu, Yongchun Zhu and Yitai Qian

Journal of Power Sources, 2014, 272, 880
DOI: 10.1016/j.jpowsour.2014.09.046

The effect of O3–P3–P′3 phases coexistence in NaxFe0.3Co0.7O2 cathode material on its electronic and electrochemical properties. Experimental and theoretical studies

Janina Molenda, Anna Plewa, Andrzej Kulka, Łukasz Kondracki, Katarzyna Walczak, Anna Milewska, Michał Rybski, Li Lu and Janusz Tobola

Journal of Power Sources, 2020, 449, 227471
DOI: 10.1016/j.jpowsour.2019.227471

P2-NaxMn1/2Fe1/2O2 Phase Used as Positive Electrode in Na Batteries: Structural Changes Induced by the Electrochemical (De)intercalation Process

Benoit Mortemard de Boisse, Dany Carlier, Marie Guignard, Lydie Bourgeois and Claude Delmas

Inorg. Chem., 2014, 53, 11197
DOI: 10.1021/ic5017802

Trace doping realizing superior electrochemical performance in P2-type Na0.50Li0.08Mn0.60Co0.16Ni0.16O2 cathode for sodium-ion batteries

Hongying Hou, Jinxu Qiu, Bao Li, Liang Wang, Zhuangzhuang Zhang, Mengmin Jia, Xiaobing Lai, Mingming Han, Pengyao Yan, Dai-Huo Liu, Dongmei Dai and Bao Wang

Chinese Chemical Letters, 2023, 34, 108810
DOI: 10.1016/j.cclet.2023.108810

Layered P2-type Na0.5Ni0.25Mn0.75O2 as a high performance cathode material for sodium-ion batteries

P. Manikandan, D. Ramasubramonian and M.M. Shaijumon

Electrochimica Acta, 2016, 206, 199
DOI: 10.1016/j.electacta.2016.04.138

Study of the Transition Metal Ordering in Layered NaxNix/2Mn1–x/2O2 (2/3 ≤ x ≤ 1) and Consequences of Na/Li Exchange

Jordi Cabana, Natasha A. Chernova, Jie Xiao, Megan Roppolo, Kellie A. Aldi, M. Stanley Whittingham and Clare P. Grey

Inorg. Chem., 2013, 52, 8540
DOI: 10.1021/ic400579w

Realizing the high stability of P2-type layered cathode materials for sodium-ion batteries based on the diagonal rule strategy

Chen Wu, Yuxing Xu, Jiechen Song, Ying Hou, Shiyang Jiang, Rui He, Aijia Wei and Qiangqiang Tan

Materials Today Energy, 2025, 49, 101822
DOI: 10.1016/j.mtener.2025.101822

Layered P2‐Na0.66Fe0.5Mn0.5O2 Cathode Material for Rechargeable Sodium‐Ion Batteries

Jiantie Xu, Shu‐Lei Chou, Jian‐Li Wang, Hua‐Kun Liu and Shi‐Xue Dou

ChemElectroChem, 2014, 1, 371
DOI: 10.1002/celc.201300026

A twofold approach for prolonging the lifespan of cobalt-free Na[Ni0.55Mn0.35Fe0.1]O2 cathode via Bi5+-doping and Bi2O3 coating in sodium ion batteries

Raghvendra Mishra, Rupesh K. Tiwari, Anupam Patel, Anurag Tiwari and Rajendra K. Singh

Journal of Energy Storage, 2024, 77, 110058
DOI: 10.1016/j.est.2023.110058

Facile synthesis of cobalt-doped sodium lithium manganese oxide with superior rate capability and excellent cycling performance for sodium-ion battery

Nguyen Thi Thu Hoa, Nguyen Van Ky, Luong Trung Son, Dinh Tien Dung, To Van Nguyen, Vu Dinh Lam and Nguyen Van Nghia

Journal of Electroanalytical Chemistry, 2023, 929, 117129
DOI: 10.1016/j.jelechem.2022.117129

Effects of Transition-Metal Mixing on Na Ordering and Kinetics in Layered P2 Oxides

Chen Zheng, Balachandran Radhakrishnan, Iek-Heng Chu, Zhenbin Wang and Shyue Ping Ong

Phys. Rev. Applied, 2017, 7
DOI: 10.1103/PhysRevApplied.7.064003

The critical role of sodium content on structure, morphology and electrochemical performance of layered P2-type Na x Ni 0.167 Co 0.167 Mn 0.67 O 2 for sodium ion batteries

Shuo Bao, Shaohua Luo, Zhiyuan Wang, Qing Wang, Aimin Hao, Yahui Zhang and Yingling Wang

Journal of Power Sources, 2017, 362, 323
DOI: 10.1016/j.jpowsour.2017.07.057

Development of P2 or P2/P3 cathode materials for sodium-ion batteries by controlling the Ni and Mn contents in Na0.7CoxMnyNizO2 layered oxide

Charifa Hakim, Habtom Desta Asfaw, Reza Younesi, Daniel Brandell, Kristina Edström and Ismael Saadoune

Electrochimica Acta, 2023, 438, 141540
DOI: 10.1016/j.electacta.2022.141540

Enhanced sodium storage characteristics of P2-Na2/3Mn3/4Co1/4O2 cathode co-modified by La2O3 and TiO2 oxide

Lijun Wang, Yanzhi Wang, Xiaheng Yang, Jinlong Wang, Yanhong Li and Jiabin Zhao

Materials Chemistry and Physics, 2019, 238, 121933
DOI: 10.1016/j.matchemphys.2019.121933

An Active and Durable Misfit-Layered Air Electrode for Reversible Protonic Ceramic Electrochemical Cells

Xirui Zhang, Yangsen Xu, Kang Xu, Liyan Chen, Feng Zhu, Fan He, Zhiwei Du, Wei Yuan and Yu Chen

ACS Energy Lett., 2025, 10, 1874
DOI: 10.1021/acsenergylett.4c03562

New P2 - Na0.70Mn0.60Ni0.30Co0.10O2Layered Oxide as Electrode Material for Na-Ion Batteries

Jun Yoshida, Elodie Guerin, Mélissa Arnault, Cédric Constantin, Benoit Mortemard de Boisse, Dany Carlier, Marie Guignard and Claude Delmas

J. Electrochem. Soc., 2014, 161, A1987
DOI: 10.1149/2.0121414jes

Study of Transport Properties and Interfacial Kinetics of Na2/3[Ni1/3MnxTi2/3-x]O2(x = 0,1/3) as Electrodes for Na-Ion Batteries

Rengarajan Shanmugam and Wei Lai

J. Electrochem. Soc., 2015, 162, A8
DOI: 10.1149/2.0201501jes

Understanding Fundamentals and Reaction Mechanisms of Electrode Materials for Na‐Ion Batteries

Linghui Yu, Luyuan Paul Wang, Hanbin Liao, Jingxian Wang, Zhenxing Feng, Ovadia Lev, Joachim S. C. Loo, Moulay Tahar Sougrati and Zhichuan J. Xu

Small, 2018, 14
DOI: 10.1002/smll.201703338

Effect of dopants and microstructure on the electrochemical cyclic stability of layered P2-type Na0.67MnO2 prepared by different chemical routes: An experimental and theoretical study

Manchala Venkatesh, G. Sudha Priyanga, Sonia Sharma, P. Laxman Mani Kanta, Tiju Thomas, R. Gopalan and Bijoy Das

Ceramics International, 2023, 49, 6654
DOI: 10.1016/j.ceramint.2022.11.002

Cu doping in TM ordered and disordered layered oxides for Sodium-Ion Batteries: Electrochemical Properties, structure evolution and Cu-Ion migration

Yan Jin, Yinhui Peng, Yunbo Li, Hongyan Zhou, Jingjie Feng, Qinghua Fan, Quan Kuang, Youzhong Dong, Xiaobao Yang and Yanming Zhao

Chemical Engineering Journal, 2024, 495, 152788
DOI: 10.1016/j.cej.2024.152788

Co3O4-modified P2–Na2/3Mn0.75Co0.25O2 cathode for Na-ion batteries with high capacity and excellent cyclability

Lijun Wang, Xin Zhang, Xiaheng Yang, Jinlong Wang, Jiaying Deng and Yanzhi Wang

Journal of Alloys and Compounds, 2020, 832, 154960
DOI: 10.1016/j.jallcom.2020.154960

K+-doped P2-Na0.67Fe0.5Mn0.5O2 cathode for highly enhanced rate performance sodium-ion battery

Guangxia Tang, Ziwei Chen, Zhiye Lin, Sen Luo, Tianwei Chen, Jiakun Chen, Wenjin Xiang, Weishan Li and Min Chen

Journal of Alloys and Compounds, 2023, 947, 169482
DOI: 10.1016/j.jallcom.2023.169482

Layered NaxMnO2+z in Sodium Ion Batteries–Influence of Morphology on Cycle Performance

Nicolas Bucher, Steffen Hartung, Arun Nagasubramanian, Yan Ling Cheah, Harry E. Hoster and Srinivasan Madhavi

ACS Appl. Mater. Interfaces, 2014, 6, 8059
DOI: 10.1021/am406009t

Advances in honeycomb layered oxides: Syntheses, layer stackings and material characterisation techniques of pnictogen- and chalcogen-based honeycomb layered oxides

Godwill Mbiti Kanyolo, Titus Masese, Abbas Alshehabi and Zhen-Dong Huang

Materials Today Chemistry, 2023, 33, 101657
DOI: 10.1016/j.mtchem.2023.101657

Understanding charge compensation mechanisms in Na0.56Mg0.04Ni0.19Mn0.70O2

Le Anh Ma, Felix Massel, Andrew J. Naylor, Laurent-C. Duda and Reza Younesi

Commun Chem, 2019, 2
DOI: 10.1038/s42004-019-0227-z

Comprehensive Review of P2-Type Na2/3Ni1/3Mn2/3O2, a Potential Cathode for Practical Application of Na-Ion Batteries

Jiaolong Zhang, Wenhui Wang, Wei Wang, Shuwei Wang and Baohua Li

ACS Appl. Mater. Interfaces, 2019, 11, 22051
DOI: 10.1021/acsami.9b03937

Topotactic Phase Transformation of Hexagonal MoO3 to Layered MoO3-II and Its Two-Dimensional (2D) Nanosheets

Vipin Kumar, Afriyanti Sumboja, Jiangxin Wang, Venkateswarlu Bhavanasi, Viet Cuong Nguyen and Pooi See Lee

Chem. Mater., 2014, 26, 5533
DOI: 10.1021/cm502558t

Electrochemical performance of different high-entropy cathode materials for Na-ion batteries

Mikołaj Nowak, Katarzyna Walczak, Anna Milewska, Justyna Płotek, Andrzej Budziak and Janina Molenda

Journal of Alloys and Compounds, 2023, 968, 172316
DOI: 10.1016/j.jallcom.2023.172316

P2 ‐type Na x TmO 2 oxides as cathodes for non‐aqueous sodium‐ion batteries—Structural evolution and commercial prospects

Debanjana Pahari, Ananya Kumar, Dhrubajyoti Das and Sreeraj Puravankara

Intl J of Energy Research, 2022, 46, 21894
DOI: 10.1002/er.8543

Impact of Potassium in Layered Cobalt Oxide Cathodes on Electrochemical Performance in Sodium‐Ion Batteries

Daria Mikhailova, Lea Haase, Hoang Bao An Nguyen, Alexander Thomas, Mikhail V. Gorbunov, Martin Hantusch and Maxim Avdeev

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202406384

Li-Substituted Co-Free Layered P2/O3 Biphasic Na0.67Mn0.55Ni0.25Ti0.2–xLixO2 as High-Rate-Capability Cathode Materials for Sodium Ion Batteries

Zheng-Yao Li, Jicheng Zhang, Rui Gao, Heng Zhang, Lirong Zheng, Zhongbo Hu and Xiangfeng Liu

J. Phys. Chem. C, 2016, 120, 9007
DOI: 10.1021/acs.jpcc.5b11983

Regulating Cation Interactions for Zero‐Strain and High‐Voltage P2‐type Na2/3Li1/6Co1/6Mn2/3O2 Layered Oxide Cathodes of Sodium‐Ion Batteries

Peichao Zou, Libing Yao, Chunyang Wang, Sang Jun Lee, Tianyi Li and Huolin L. Xin

Angew Chem Int Ed, 2023, 62
DOI: 10.1002/anie.202304628

Cost-effective microwave-assisted O3- type sodium-based layered oxide cathode materials for sodium-ion batteries

R.A. Harindi Gayara, Buzaina Moossa, R.A. Shakoor, Rana Faisal Shahzad, Muhammad Sajjad, Nirpendra Singh, Shahid Rasul and Talal Mohammed Al tahtamouni

Energy Reports, 2023, 10, 837
DOI: 10.1016/j.egyr.2023.07.038

In Situ Electrochemical K‐Doping Assists Li and F Multisite Doping for Long‐Life Sodium‐Ion Batteries

Chen Wu, Yuxing Xu, Jiechen Song, Ying Hou, Shiyang Jiang, Rui He, Aijia Wei, Jiekang Tian and Qiangqiang Tan

Adv Funct Materials, 2025, 35
DOI: 10.1002/adfm.202503812

Ti-substituted tunnel-type Na0.44MnO2 oxide as a negative electrode for aqueous sodium-ion batteries

Yuesheng Wang, Jue Liu, Byungju Lee, Ruimin Qiao, Zhenzhong Yang, Shuyin Xu, Xiqian Yu, Lin Gu, Yong-Sheng Hu, Wanli Yang, Kisuk Kang, Hong Li, Xiao-Qing Yang, Liquan Chen and Xuejie Huang

Nat Commun, 2015, 6
DOI: 10.1038/ncomms7401

Combustion-synthesized sodium manganese (cobalt) oxides as cathodes for sodium ion batteries

Nicolas Bucher, Steffen Hartung, Irina Gocheva, Yan L. Cheah, Madhavi Srinivasan and Harry E. Hoster

J Solid State Electrochem, 2013, 17, 1923
DOI: 10.1007/s10008-013-2047-x

Extending nonhysteretic oxygen capacity in P2-type Ni-Mn binary Na oxides

Chanwoo Koo, Dohyeong Kwon, Sung-Joon Park, Jaewoon Lee, Geon-Hee Yoon, Seok Hyun Song, Tae-Yeol Jeon, Heemin Kang, Hyungsub Kim, Duho Kim and Seung-Ho Yu

Chemical Engineering Journal, 2022, 446, 137429
DOI: 10.1016/j.cej.2022.137429

Roles of Coherent Interfaces on Electrochemical Performance of Sodium Layered Oxide Cathodes

Qun Huang, Jiatu Liu, Sheng Xu, Peng Wang, Douglas G. Ivey, Baiyun Huang and Weifeng Wei

Chem. Mater., 2018, 30, 4728
DOI: 10.1021/acs.chemmater.8b01556

A P2@Tunnel Heterostructure Cathode for High‐Performance Sodium‐Ion Batteries

Qun Huang, Yiming Feng, Sheng Xu, Lei Xiao, Pingge He, Xiaobo Ji, Peng Wang, Liangjun Zhou and Weifeng Wei

ChemElectroChem, 2020, 7, 4383
DOI: 10.1002/celc.202001054

RECENT ADVANCES IN SODIUM INTERCALATION POSITIVE ELECTRODE MATERIALS FOR SODIUM ION BATTERIES

JING XU, DAE HOE LEE and YING SHIRLEY MENG

Funct. Mater. Lett., 2013, 06, 1330001
DOI: 10.1142/S1793604713300016

Solid-State Chemistry Shuffling of Alkali Ions toward New Layered Oxide Materials

Eunice Mumba Mpanga, Romain Wernert, François Fauth, Emmanuelle Suard, Maxim Avdeev, Bernard Fraisse, Paula Sanz Camacho, Dany Carlier, Oleg Lebedev, Simon J. Cassidy, Gwenaëlle Rousse and Romain Berthelot

Chem. Mater., 2024, 36, 892
DOI: 10.1021/acs.chemmater.3c02749

Exploration of Advanced Electrode Materials for Rechargeable Sodium‐Ion Batteries

Yang Sun, Shaohua Guo and Haoshen Zhou

Advanced Energy Materials, 2019, 9
DOI: 10.1002/aenm.201800212

Insights into Diffusion Mechanisms in P2 Layered Oxide Materials by First-Principles Calculations

Yifei Mo, Shyue Ping Ong and Gerbrand Ceder

Chem. Mater., 2014, 26, 5208
DOI: 10.1021/cm501563f

Sidorenkite (Na3MnPO4CO3): A New Intercalation Cathode Material for Na-Ion Batteries

Hailong Chen, Qing Hao, Olivera Zivkovic, Geoffroy Hautier, Lin-Shu Du, Yuanzhi Tang, Yan-Yan Hu, Xiaohua Ma, Clare P. Grey and Gerbrand Ceder

Chem. Mater., 2013, 25, 2777
DOI: 10.1021/cm400805q

Sodium superionic conductor NaTi2(PO4)3 surface layer modified P2-type Na2/3Ni1/3Mn2/3O2 as high-performance cathode for sodium-ion batteries

Haiming Li, Tailin Wang, Xue Wang, Guangda Li, Yi Du, Jianxing Shen and Jinling Chai

Journal of Power Sources, 2021, 494, 229771
DOI: 10.1016/j.jpowsour.2021.229771

Ex Situ 23Na Solid-State NMR Reveals the Local Na-Ion Distribution in Carbon-Coated Na2FePO4F during Electrochemical Cycling

Danielle L. Smiley and Gillian R. Goward

Chem. Mater., 2016, 28, 7645
DOI: 10.1021/acs.chemmater.6b02539

Electrode Properties of P2–Na2/3MnyCo1–yO2 as Cathode Materials for Sodium-Ion Batteries

Xianfen Wang, Mao Tamaru, Masashi Okubo and Atsuo Yamada

J. Phys. Chem. C, 2013, 117, 15545
DOI: 10.1021/jp406433z

High Rate Performance for Carbon‐Coated Na3V2(PO4)2F3 in Na‐Ion Batteries

Thibault Broux, François Fauth, Nikita Hall, Yohann Chatillon, Matteo Bianchini, Tahya Bamine, Jean‐Bernard Leriche, Emmanuelle Suard, Dany Carlier, Yvan Reynier, Loïc Simonin, Christian Masquelier and Laurence Croguennec

Small Methods, 2019, 3
DOI: 10.1002/smtd.201800215

A Comparative Study of LiCoO2 Polymorphs: Structural and Electrochemical Characterization of O2-, O3-, and O4-type Phases

Naoaki Yabuuchi, Yuta Kawamoto, Ryo Hara, Toru Ishigaki, Akinori Hoshikawa, Masao Yonemura, Takashi Kamiyama and Shinichi Komaba

Inorg. Chem., 2013, 52, 9131
DOI: 10.1021/ic4013922

Titanium-doped P2-type Na0.67Co0.67Mn0.33-χTiχO2 (0 ≤ χ ≤ 0.2) as Novel Cathodes for Sodium Ion Batteries with Superior-Rate

Dengmei Zhou, Wanxia Huang, Xueya Kang, Fenglin Zhao, Ling Zhao, Zhilin Deng, Xianwei Yan, Yongbo Yu and Mingwu Xiang

International Journal of Electrochemical Science, 2018, 13, 2010
DOI: 10.20964/2018.02.62

On Disrupting the Na+-Ion/Vacancy Ordering in P2-Type Sodium–Manganese–Nickel Oxide Cathodes for Na+-Ion Batteries

Arturo Gutierrez, Wesley M. Dose, Olaf Borkiewicz, Fangmin Guo, Maxim Avdeev, Soojeong Kim, Timothy T. Fister, Yang Ren, Javier Bareño and Christopher S. Johnson

J. Phys. Chem. C, 2018, 122, 23251
DOI: 10.1021/acs.jpcc.8b05537

Stabilizing Transition Metal Vacancy Induced Oxygen Redox by Co2+/Co3+ Redox and Sodium‐Site Doping for Layered Cathode Materials

Xun‐Lu Li, Jian Bao, Zulipiya Shadike, Qin‐Chao Wang, Xiao‐Qing Yang, Yong‐Ning Zhou, Dalin Sun and Fang Fang

Angew Chem Int Ed, 2021, 60, 22026
DOI: 10.1002/anie.202108933

Designing layered oxides as cathodes for sodium-ion batteries: Machine learning and density functional theory based modeling

Nishant Mishra, Rajdeep Boral and Tanmoy Paul

Materials Today Physics, 2025, 51, 101634
DOI: 10.1016/j.mtphys.2024.101634

Na0.91MnO2 with an Extended Layer Structure and Excellent Pseudocapacitive Behavior as a Cathode Material for Sodium-Ion Batteries

Lijun Wu, Shoujie Guo, Xiangjun Pu, Hongwei Yue, Hao Li, Pinjiang Li, Wei Li, Kun Cai, Wenjie Ding, Longfei Li, Yange Zhang, Wenjun Fa, Changchun Yang, Zhi Zheng, Weiwei He and Yuliang Cao

ACS Appl. Energy Mater., 2022, 5, 4505
DOI: 10.1021/acsaem.1c04102

Electrochemical investigations of Na0.7CoO2 cathode with PEO-NaTFSI-BMIMTFSI electrolyte as promising material for Na-rechargeable battery

Varun Kumar Singh, Shishir Kumar Singh, Himani Gupta, Shalu, Liton Balo, Alok Kumar Tripathi, Yogendra Lal Verma and Rajendra Kumar Singh

J Solid State Electrochem, 2018, 22, 1909
DOI: 10.1007/s10008-018-3891-5

Synthesis, Crystal Structure, and Electrochemical Properties of Alluaudite Na1.702Fe3(PO4)3 as a Sodium-Ion Battery Cathode

Dan Liu and G. Tayhas R. Palmore

ACS Sustainable Chem. Eng., 2017, 5, 5766
DOI: 10.1021/acssuschemeng.7b00371

Investigation of sodium content on the electrochemical performance of the Nax(Fe0.35Mn0.35Co0.3)O2 (x = 0.5, 0.6, 0.7, 0.8, 0.9) for sodium-ion batteries

Serap Gençtürk, Davut Uzun and Serkan Yeşilot

Ionics, 2020, 26, 223
DOI: 10.1007/s11581-019-03211-1

Synthesis and physical properties of Na x TO 2 (T = Mn, Co) nanostructures for cathode materials in Na-ion batteries

Mahesh Chandra, Rishabh Shukla, Muhammad Rashid, Amit Gupta, Suddhasatwa Basu and R.S. Dhaka

Materials Research Bulletin, 2018, 105, 178
DOI: 10.1016/j.materresbull.2018.04.022

Enhanced Sodium Ion Storage Behavior of P2-Type Na2/3Fe1/2Mn1/2O2 Synthesized via a Chelating Agent Assisted Route

Ying Bai, Lixiang Zhao, Chuan Wu, Hui Li, Yu Li and Feng Wu

ACS Appl. Mater. Interfaces, 2016, 8, 2857
DOI: 10.1021/acsami.5b11848

Enhanced Rate Capability and Cycle Performance of Titanium-Substituted P2-Type Na0.67Fe0.5Mn0.5O2 as a Cathode for Sodium-Ion Batteries

Joon-ki Park, Geun-gyung Park, Hunho H. Kwak, Seung-Tae Hong and Jae-won Lee

ACS Omega, 2018, 3, 361
DOI: 10.1021/acsomega.7b01481

Layered P2/O3 Intergrowth Cathode: Toward High Power Na‐Ion Batteries

Eungje Lee, Jun Lu, Yang Ren, Xiangyi Luo, Xiaoyi Zhang, Jianguo Wen, Dean Miller, Aaron DeWahl, Stephen Hackney, Baris Key, Donghan Kim, Michael D. Slater and Christopher S. Johnson

Advanced Energy Materials, 2014, 4
DOI: 10.1002/aenm.201400458

High Performance Na0.5[Ni0.23Fe0.13Mn0.63]O2 Cathode for Sodium‐Ion Batteries

Ivana Hasa, Daniel Buchholz, Stefano Passerini, Bruno Scrosati and Jusef Hassoun

Advanced Energy Materials, 2014, 4
DOI: 10.1002/aenm.201400083

In Situ X‐Ray Diffraction Studies on Structural Changes of a P2 Layered Material during Electrochemical Desodiation/Sodiation

Young Hwa Jung, Ane S. Christiansen, Rune E. Johnsen, Poul Norby and Do Kyung Kim

Adv Funct Materials, 2015, 25, 3227
DOI: 10.1002/adfm.201500469

Understanding Na/vacancy Re-arrangement upon Ion Transport in Sodium Layered Oxide Cathodes

Kun Luo, Yang Jiang, Wenhui Li, Ruihang Wen and Houze Song

Acta Materialia, 2025, 285, 120687
DOI: 10.1016/j.actamat.2024.120687

Promising Cathode Materials for Sodium-Ion Batteries from Lab to Application

Shitan Xu, Huanhuan Dong, Dan Yang, Chun Wu, Yu Yao, Xianhong Rui, Shulei Chou and Yan Yu

ACS Cent. Sci., 2023, 9, 2012
DOI: 10.1021/acscentsci.3c01022

Trace Nb-doped Na0.7Ni0.3Co0.1Mn0.6O2 with suppressed voltage decay and enhanced low temperature performance

Ruyun Yue, Fang Xia, Ruijuan Qi, Da Tie, Shanshan Shi, Zhiping Li, Yufeng Zhao and Jiujun Zhang

Chinese Chemical Letters, 2021, 32, 849
DOI: 10.1016/j.cclet.2020.05.025

Sm-doped P2-type layered oxide with spherical secondary hierarchy as cathode material for sodium-ion batteries

Shaojun Shi, Panye Jin, Zhixiong Huang, Jialei Kou, Hongmei Ji, Wenyu Yin, Xiaoyan Tang and Han Mao

Vacuum, 2025, 237, 114186
DOI: 10.1016/j.vacuum.2025.114186

Novel K+-doped Na0.6Mn0.35Fe0.35Co0.3O2 cathode materials for sodium-ion batteries: synthesis, structures, and electrochemical properties

Serap Gençtürk Tosun, Davut Uzun and Serkan Yeşilot

J Solid State Electrochem, 2021, 25, 1271
DOI: 10.1007/s10008-021-04906-0

Manganese‐based layered oxide cathodes for sodium ion batteries

Huanqing Liu, Wentao Deng, Xu Gao, Jun Chen, Shouyi Yin, Li Yang, Guoqiang Zou, Hongshuai Hou and Xiaobo Ji

Nano Select, 2020, 1, 200
DOI: 10.1002/nano.202000030

Nitrogen‐Doping‐Induced Defects of a Carbon Coating Layer Facilitate Na‐Storage in Electrode Materials

Wei Shen, Cong Wang, Qunjie Xu, Haimei Liu and Yonggang Wang

Advanced Energy Materials, 2015, 5
DOI: 10.1002/aenm.201400982

Mo-Modified P2-type Manganese Oxide Nanoplates with an Oriented Stacking Structure and Exposed {010} Active Facets as a Long-Life Sodium-Ion Battery Cathode

Quanqing Zhao, Zefeng Guo, Liqin Wang, Yu Wu, Faheem K. Butt, Youqi Zhu, Xingyan Xu, Xilan Ma and Chuanbao Cao

ACS Appl. Mater. Interfaces, 2019, 11, 30819
DOI: 10.1021/acsami.9b07950

Superior Ionic Transferring Polymer with Silicon Dioxide Composite Membrane via Phase Inversion Method Designed for High Performance Sodium-Ion Battery

Ponnaiah Arjunan, Mathiyalagan Kouthaman, Rengapillai Subadevi, Karuppiah Diwakar, Wei-Ren Liu, Chia-Hung Huang and Marimuthu Sivakumar

Polymers, 2020, 12, 405
DOI: 10.3390/polym12020405

Core–Shell Structure and X‐Doped (X = Li, Zr) Comodified O3‐NaNi0.5Mn0.5O2: Excellent Electrochemical Performance as Cathode Materials of Sodium‐Ion Batteries

Jing Ren, Rongbin Dang, Yuqiang Yang, Kang Wu, Yulin Lee, Zhongbo Hu, Xiaoling Xiao and Min Wang

Energy Tech, 2020, 8
DOI: 10.1002/ente.201901504

Passivation Layer and Cathodic Redox Reactions in Sodium‐Ion Batteries Probed by HAXPES

Siham Doubaji, Bertrand Philippe, Ismael Saadoune, Mihaela Gorgoi, Torbjorn Gustafsson, Abderrahim Solhy, Mario Valvo, Håkan Rensmo and Kristina Edström

ChemSusChem, 2016, 9, 97
DOI: 10.1002/cssc.201501282

Transition Metal Slab Gliding: One Key Process for Activating Anionic Redox Reaction in P2‐Type Transition Metal Oxide Cathodes

Dongxiao Wang, Feihu Zou, Weiguang Lin, Xiaochen Zhang, Xinran Zhang, Xingguo Qi, Shuyin Xu, Huican Mao, Dongdong Xiao, Shigang Lu, Bingkun Guo, Yong‐Sheng Hu and Yingchun Lyu

Advanced Science, 2025, 12
DOI: 10.1002/advs.202501852

Towards Highly Stable Storage of Sodium Ions: A Porous Na3V2(PO4)3/C Cathode Material for Sodium‐Ion Batteries

Wei Shen, Cong Wang, Haimei Liu and Wensheng Yang

Chemistry A European J, 2013, 19, 14712
DOI: 10.1002/chem.201300005

In Operando XRD and TXM Study on the Metastable Structure Change of NaNi1/3Fe1/3Mn1/3O2 under Electrochemical Sodium‐Ion Intercalation

Yingying Xie, Hong Wang, Guiliang Xu, Jiajun Wang, Huaping Sheng, Zonghai Chen, Yang Ren, Cheng‐Jun Sun, Jianguo Wen, Jun Wang, Dean J. Miller, Jun Lu, Khalil Amine and Zi‐Feng Ma

Advanced Energy Materials, 2016, 6
DOI: 10.1002/aenm.201601306

Ultralow Volume Change of P2‐Type Layered Oxide Cathode for Na‐Ion Batteries with Controlled Phase Transition by Regulating Distribution of Na+

Zhengbo Liu, Jiadong Shen, Shihui Feng, Yalan Huang, Duojie Wu, Fangkun Li, Yuanmin Zhu, Meng Gu, Qi Liu, Jun Liu and Min Zhu

Angew Chem Int Ed, 2021, 60, 20960
DOI: 10.1002/anie.202108109

Insights into the Dual-Electrode Characteristics of Layered Na0.5Ni0.25Mn0.75O2 Materials for Sodium-Ion Batteries

Manikandan Palanisamy, Hyun Woo Kim, Seongwoo Heo, Eungje Lee and Youngsik Kim

ACS Appl. Mater. Interfaces, 2017, 9, 10618
DOI: 10.1021/acsami.6b15355

Layered NaxCoO2-based cathodes for advanced Na-ion batteries: review on challenges and advancements

Venkata Rami Reddy Boddu, Dhanya Puthusseri, Parasharam M. Shirage, Pradeep Mathur and Vilas G. Pol

Ionics, 2021, 27, 4549
DOI: 10.1007/s11581-021-04265-w

Research progress on P2-type layered oxide cathode materials for sodium-ion batteries

Chen Wu, Yuxing Xu, Jiechen Song, Ying Hou, Shiyang Jiang, Rui He, Aijia Wei and Qiangqiang Tan

Chemical Engineering Journal, 2024, 500, 157264
DOI: 10.1016/j.cej.2024.157264

Review of Layered Transition Metal Oxide Materials for Cathodes in Sodium-Ion Batteries

Mehdi Ahangari, Meng Zhou and Hongmei Luo

Micromachines, 2025, 16, 137
DOI: 10.3390/mi16020137

Sodium iron pyrophosphate: A novel 3.0 V iron-based cathode for sodium-ion batteries

Prabeer Barpanda, Tian Ye, Shin-ichi Nishimura, Sai-Cheong Chung, Yuki Yamada, Masashi Okubo, Haoshen Zhou and Atsuo Yamada

Electrochemistry Communications, 2012, 24, 116
DOI: 10.1016/j.elecom.2012.08.028

Synthesis and characterization of Ru doped NaNi0.5Mn0.3Ti0.2O2 cathode material with improved electrochemical performance for sodium-ion batteries

Mingzhe Leng, Jianqiang Bi, Weili Wang, Rui Liu and Chi Xia

Ionics, 2019, 25, 1105
DOI: 10.1007/s11581-018-2830-x

Evaluating Electrochemical Properties of Layered NaxMn0.5Co0.5O2 Obtained at Different Calcined Temperatures

Le Minh Nguyen, Van Hoang Nguyen, Doan My Ngoc Nguyen, Minh Kha Le, Van Man Tran and My Loan Phung Le

ChemEngineering, 2023, 7, 33
DOI: 10.3390/chemengineering7020033

Suppressing staircase-like electrochemical profile induced by P O transition by solid-solution reaction with continuous structural evolution in layered Na-ion battery cathode

Kun Luo, Ming Chen, Mengdan Tian, Wenhui Li, Yang Jiang and Zhihao Yuan

Chemical Engineering Journal, 2023, 461, 142101
DOI: 10.1016/j.cej.2023.142101

Regulating Cation Interactions for Zero‐Strain and High‐Voltage P2‐type Na2/3Li1/6Co1/6Mn2/3O2 Layered Oxide Cathodes of Sodium‐Ion Batteries

Peichao Zou, Libing Yao, Chunyang Wang, Sang Jun Lee, Tianyi Li and Huolin L. Xin

Angewandte Chemie, 2023, 135
DOI: 10.1002/ange.202304628

Layered Hierarchical Modification Strategy in P2-Type Oxide Cathodes Enables High-Rate Capability and Long-Term Stability for Sodium-Ion Batteries

Chen Wu, Yuxing Xu, Jiechen Song, Ying Hou, Shiyang Jiang, Rui He, Aijia Wei, Jiekang Tian and Qiangqiang Tan

ACS Appl. Mater. Interfaces, 2025
DOI: 10.1021/acsami.5c14590

Dual Stabilization and Sacrificial Effect of Na2CO3 for Increasing Capacities of Na-Ion Cells Based on P2-NaxMO2 Electrodes

Mariyappan Sathiya, Joy Thomas, Dmitry Batuk, Vanessa Pimenta, Raghavan Gopalan and Jean-Marie Tarascon

Chem. Mater., 2017, 29, 5948
DOI: 10.1021/acs.chemmater.7b01542

Stabilizing Transition Metal Vacancy Induced Oxygen Redox by Co2+/Co3+ Redox and Sodium‐Site Doping for Layered Cathode Materials

Xun‐Lu Li, Jian Bao, Zulipiya Shadike, Qin‐Chao Wang, Xiao‐Qing Yang, Yong‐Ning Zhou, Dalin Sun and Fang Fang

Angewandte Chemie, 2021, 133, 22197
DOI: 10.1002/ange.202108933

Tailoring alternating heteroepitaxial nanostructures in Na-ion layered oxide cathodes via an in-situ composition modulation route

Qun Huang, Jiatu Liu, Li Zhang, Sheng Xu, Libao Chen, Peng Wang, Douglas G. Ivey and Weifeng Wei

Nano Energy, 2018, 44, 336
DOI: 10.1016/j.nanoen.2017.12.014

Simultaneous Reduction of Co3+ and Mn4+ in P2-Na2/3Co2/3Mn1/3O2 As Evidenced by X-ray Absorption Spectroscopy during Electrochemical Sodium Intercalation

Ju-Hsiang Cheng, Chun-Jern Pan, Jyh-Fu Lee, Jin-Ming Chen, Marie Guignard, C. Delmas, Dany Carlier and Bing-Joe Hwang

Chem. Mater., 2014, 26, 1219
DOI: 10.1021/cm403597h

Prototype Sodium‐Ion Batteries Using an Air‐Stable and Co/Ni‐Free O3‐Layered Metal Oxide Cathode

Linqin Mu, Shuyin Xu, Yunming Li, Yong‐Sheng Hu, Hong Li, Liquan Chen and Xuejie Huang

Advanced Materials, 2015, 27, 6928
DOI: 10.1002/adma.201502449

High Capacity Prismatic Type Layered Electrode with Anionic Redox Activity as an Efficient Cathode Material and PVdF/SiO2 Composite Membrane for a Sodium Ion Battery

Arjunan Ponnaiah, Subadevi Rengapillai, Diwakar Karuppiah, Sivakumar Marimuthu, Wei-Ren Liu and Chia-Hung Huang

Polymers, 2020, 12, 662
DOI: 10.3390/polym12030662

Electrochemical Performance of Chemically and Solid State-Derived Chevrel Phase Mo6T8 (T = S, Se) Positive Electrodes for Sodium-Ion Batteries

Partha Saha, Prashanth H. Jampani, Moni K. Datta, Daeho Hong, Chris U. Okoli, Ayyakkannu Manivannan and Prashant N. Kumta

J. Phys. Chem. C, 2015, 119, 5771
DOI: 10.1021/jp509057w

Charge Ordering in Cobalt Oxides: Impact on Structure, Magnetic and Transport Properties

Bernard Raveau and Md. Motin Seikh

Zeitschrift anorg allge chemie, 2015, 641, 1385
DOI: 10.1002/zaac.201500085

Modulating the Interlayer Spacing and Na+/Vacancy Disordering of P2-Na0.67MnO2 for Fast Diffusion and High-Rate Sodium Storage

Da Tie, Guofeng Gao, Fang Xia, Ruyun Yue, Qingjie Wang, Ruijuan Qi, Bo Wang and Yufeng Zhao

ACS Appl. Mater. Interfaces, 2019, 11, 6978
DOI: 10.1021/acsami.8b19134

Structure modulation and performance optimization of P2-Na0.7Mn0.75Fe0.25-x-yNixCoyO2 through a synergistic substitution of Ni and Co for Fe

Huibo Wang, Zheng-Yao Li, Wenyun Yang, Jinbo Yang, Dongfeng Chen, Chunjian Su and Xiangfeng Liu

Electrochimica Acta, 2018, 277, 88
DOI: 10.1016/j.electacta.2018.04.216

FeS@C on Carbon Cloth as Flexible Electrode for Both Lithium and Sodium Storage

Xiang Wei, Weihan Li, Jin-an Shi, Lin Gu and Yan Yu

ACS Appl. Mater. Interfaces, 2015, 7, 27804
DOI: 10.1021/acsami.5b09062

Crystal structure stabilization, electrochemical properties, and morphology of P2-type Na0.67Mn0.625Fe0.25Ni0.125O2 for Na-ion battery cathodes

Uma Garg, William Rexhausen, Nathaniel Smith, Joshua Harris, Deyang Qu and Prasenjit Guptasarma

Journal of Power Sources, 2019, 431, 105
DOI: 10.1016/j.jpowsour.2019.05.025

Sodium insertion cathode material Na0.67[Ni0.4Co0.2Mn0.4]O2 with excellent electrochemical properties

Xin Sun, Xiao-Yang Ji, Hao-Yang Xu, Chen-Yu Zhang, Yu Shao, Yong Zang and Chun-Hua Chen

Electrochimica Acta, 2016, 208, 142
DOI: 10.1016/j.electacta.2016.04.067

Electrode Materials for Rechargeable Sodium‐Ion Batteries: Potential Alternatives to Current Lithium‐Ion Batteries

Sung‐Wook Kim, Dong‐Hwa Seo, Xiaohua Ma, Gerbrand Ceder and Kisuk Kang

Advanced Energy Materials, 2012, 2, 710
DOI: 10.1002/aenm.201200026

P2-type layered structure Na1.0Li0.2Mn0.7Ti0.1O2 as a superb electrochemical performance cathode material for sodium-ion batteries

Nguyen V. To, Ky V. Nguyen, Hieu S. Nguyen, Son T. Luong, Phat T. Doan, Thu Hoa T. Nguyen, Quyen Q. Ngo and Nghia V. Nguyen

Journal of Electroanalytical Chemistry, 2021, 880, 114834
DOI: 10.1016/j.jelechem.2020.114834

Insights into the high voltage layered oxide cathode materials in sodium-ion batteries: Structural evolution and anion redox

Jiatu Liu, Wang Hay Kan and Chris D. Ling

Journal of Power Sources, 2021, 481, 229139
DOI: 10.1016/j.jpowsour.2020.229139

Efficient preparation and modification of NaFe0.33Ni0.38Mn0.38O2 as advanced cathode materials for sodium-ion battery via ultrasound-microwave assisted hydrothermal method

Chunyang Duan, Liuyang He, Xin Yang, Yanying Lin, Jianhua Qian and Zenghua Zhao

Materials Chemistry and Physics, 2025, 345, 131278
DOI: 10.1016/j.matchemphys.2025.131278

Commercial Prospects of Existing Cathode Materials for Sodium Ion Storage

Wei‐Jie Li, Chao Han, Wanlin Wang, Florian Gebert, Shu‐Lei Chou, Hua‐Kun Liu, Xinhe Zhang and Shi‐Xue Dou

Advanced Energy Materials, 2017, 7
DOI: 10.1002/aenm.201700274

Enhanced Electrochemical Performance of Mg-Doped P2–Na0.7[Ni0.3Mn0.6Fe0.1]O2 Cobalt-Free Cathode Materials for Sodium-Ion Batteries

Raghvendra Mishra, Anupam Patel, Anurag Tiwari, Samriddhi, Shitanshu Pratap Singh, Vikas Yadav, Rupesh Kumar Tiwari and Rajendra Kumar Singh

ACS Appl. Energy Mater., 2024, 7, 6736
DOI: 10.1021/acsaem.4c01355

Critical interface between inorganic solid-state electrolyte and sodium metal

Bin Tang, Prem Wicram Jaschin, Xin Li, Shou-Hang Bo and Zhen Zhou

Materials Today, 2020, 41, 200
DOI: 10.1016/j.mattod.2020.08.016

Layered oxides as positive electrode materials for Na-ion batteries

Kei Kubota, Naoaki Yabuuchi, Hiroaki Yoshida, Mouad Dahbi and Shinichi Komaba

MRS Bull., 2014, 39, 416
DOI: 10.1557/mrs.2014.85

Ultralow Volume Change of P2‐Type Layered Oxide Cathode for Na‐Ion Batteries with Controlled Phase Transition by Regulating Distribution of Na+

Zhengbo Liu, Jiadong Shen, Shihui Feng, Yalan Huang, Duojie Wu, Fangkun Li, Yuanmin Zhu, Meng Gu, Qi Liu, Jun Liu and Min Zhu

Angewandte Chemie, 2021, 133, 21128
DOI: 10.1002/ange.202108109

Meso‐Scale Modeling of Glide Phase Transformations in Layered Intercalation Compounds

Justin A. Mayer, Maxwell D. Radin, Irene J. Beyerlein and Anton Van der Ven

Advanced Energy Materials, 2026
DOI: 10.1002/aenm.202505903

Structural stability and ionic transport property of NaMPO4 (M = V, Cr, Mn, Fe, Co, Ni) as cathode material for Na-ion batteries

Lin Zhu, Lin Li, Jing Wen and Ya-Ru Zeng

Journal of Power Sources, 2019, 438, 227016
DOI: 10.1016/j.jpowsour.2019.227016

Bridging the gap from basic principles to advanced applications in sodium-ion batteries

Hyungil Jang, Byoungwook Youn, Youngho Han and Doojin Lee

Journal of Energy Storage, 2026, 142, 119547
DOI: 10.1016/j.est.2025.119547

The Emerging Chemistry of Sodium Ion Batteries for Electrochemical Energy Storage

Dipan Kundu, Elahe Talaie, Victor Duffort and Linda F. Nazar

Angew Chem Int Ed, 2015, 54, 3431
DOI: 10.1002/anie.201410376

P2 Orthorhombic Na0.7[Mn1–xLix]O2+y as Cathode Materials for Na-Ion Batteries

Mi-Sook Kwon, Shin Gwon Lim, Yuwon Park, Sang-Min Lee, Kyung Yoon Chung, Tae Joo Shin and Kyu Tae Lee

ACS Appl. Mater. Interfaces, 2017, 9, 14758
DOI: 10.1021/acsami.7b00058

Original Layered OP4-(Li,Na)xCoO2 Phase: Insights on Its Structure, Electronic Structure, and Dynamics from Solid State NMR

Yohan Biecher, Danielle L. Smiley, Marie Guignard, François Fauth, Romain Berthelot, Claude Delmas, Gillian R. Goward and Dany Carlier

Inorg. Chem., 2020, 59, 5339
DOI: 10.1021/acs.inorgchem.9b03417

High‐Performance P2‐Type Na2/3(Mn1/2Fe1/4Co1/4)O2 Cathode Material with Superior Rate Capability for Na‐Ion Batteries

Lei Liu, Xin Li, Shou‐Hang Bo, Yan Wang, Hailong Chen, Nancy Twu, Di Wu and Gerbrand Ceder

Advanced Energy Materials, 2015, 5
DOI: 10.1002/aenm.201500944

Insights into Crystal Structure and Diffusion of Biphasic Na2Zn2TeO6

Xinyu Li, Federico Bianchini, Julia Wind, Christine Pettersen, David S. Wragg, Ponniah Vajeeston and Helmer Fjellvåg

ACS Appl. Mater. Interfaces, 2020, 12, 28188
DOI: 10.1021/acsami.0c05863

P2-Na0.6[Cr0.6Ti0.4]O2 cation-disordered electrode for high-rate symmetric rechargeable sodium-ion batteries

Yuesheng Wang, Ruijuan Xiao, Yong-Sheng Hu, Maxim Avdeev and Liquan Chen

Nat Commun, 2015, 6
DOI: 10.1038/ncomms7954

Layered P2-Na2/3Co1/2Ti1/2O2 as a high-performance cathode material for sodium-ion batteries

Noha Sabi, Siham Doubaji, Kazuki Hashimoto, Shinichi Komaba, Khalil Amine, Abderrahim Solhy, Bouchaib Manoun, Essaid Bilal and Ismael Saadoune

Journal of Power Sources, 2017, 342, 998
DOI: 10.1016/j.jpowsour.2017.01.025

Surface modification of nano Na[Ni0.60Mn0.35Co0.05]O2 cathode material by dextran functionalized RGO via hydrothermal treatment for high performance sodium batteries

Raghvendra Mishra, Shishir K. Singh, Himani Gupta, Nitin Srivastava, Dipika Meghnani, Rupesh K. Tiwari, Anupam Patel, Anurag Tiwari, Vimal K. Tiwari and Rajendra K. Singh

Applied Surface Science, 2021, 535, 147695
DOI: 10.1016/j.apsusc.2020.147695

A perspective on electrical energy storage

John B. Goodenough and Arumugam Manthiram

MRS Communications, 2014, 4, 135
DOI: 10.1557/mrc.2014.36

P2‐NaCo0.5Mn0.5O2 as a Positive Electrode Material for Sodium‐Ion Batteries

Peilei Yang, Chaoyang Zhang, Malin Li, Xu Yang, Chunzhong Wang, Xiaofei Bie, Yingjin Wei, Gang Chen and Fei Du

ChemPhysChem, 2015, 16, 3408
DOI: 10.1002/cphc.201500599

Suppressing the P2–O2 Phase Transition of Na0.67Mn0.67Ni0.33O2 by Magnesium Substitution for Improved Sodium‐Ion Batteries

Peng‐Fei Wang, Ya You, Ya‐Xia Yin, Yue‐Sheng Wang, Li‐Jun Wan, Lin Gu and Yu‐Guo Guo

Angew Chem Int Ed, 2016, 55, 7445
DOI: 10.1002/anie.201602202

Sodium-Ion Batteries (a Review)

A. M. Skundin, T. L. Kulova and A. B. Yaroslavtsev

Russ J Electrochem, 2018, 54, 113
DOI: 10.1134/S1023193518020076

Mitigating the Capacity Degradation by Ion-Electron-Conducting Dual-Layer Coating on a Layered Oxide Cathode Material for Sodium Ion Batteries

Raghvendra Mishra, Shishir K. Singh, Nitin Srivastava, Rupesh K. Tiwari, Dipika Meghnani, Anupam Patel, Anurag Tiwari, Vimal K. Tiwari and Rajendra K. Singh

Energy Fuels, 2023, 37, 4106
DOI: 10.1021/acs.energyfuels.2c04115

Efficient Method of Designing Stable Layered Cathode Material for Sodium Ion Batteries Using Aluminum Doping

Hari Vignesh Ramasamy, Karthikeyan Kaliyappan, Ranjith Thangavel, Won Mo Seong, Kisuk Kang, Zhongwei Chen and Yun-Sung Lee

J. Phys. Chem. Lett., 2017, 8, 5021
DOI: 10.1021/acs.jpclett.7b02012

Investigation of P2-Na2/3Mn1/3Fe1/3Co1/3O2for Na-Ion Battery Positive Electrodes

J. S. Thorne, R. A. Dunlap and M. N. Obrovac

J. Electrochem. Soc., 2014, 161, A2232
DOI: 10.1149/2.0981414jes

On the P2-NaxCo1–y(Mn2/3Ni1/3)yO2 Cathode Materials for Sodium-Ion Batteries: Synthesis, Electrochemical Performance, and Redox Processes Occurring during the Electrochemical Cycling

Siham Doubaji, Lu Ma, Habtom Desta Asfaw, Ilyasse Izanzar, Rui Xu, Jones Alami, Jun Lu, Tianpin Wu, Khalil Amine, Kristina Edström and Ismael Saadoune

ACS Appl. Mater. Interfaces, 2018, 10, 488
DOI: 10.1021/acsami.7b13472

Thermodynamics and Na kinetics in P2-type oxygen redox Mn-Ni binary layered oxides manipulated via Li substitution

Sung-Joon Park, Jaewoon Lee, In-Hwan Ko, Sojung Koo, Seok Hyun Song, Chanwoo Koo, Geon-Hee Yoon, Tae-Yeol Jeon, Hyungsub Kim, Duho Kim and Seung-Ho Yu

Energy Storage Materials, 2021, 42, 97
DOI: 10.1016/j.ensm.2021.07.013

Sodium Alginate Enabled Advanced Layered Manganese-Based Cathode for Sodium-Ion Batteries

Hang Xu, Kezhu Jiang, Xueping Zhang, Xiaoyu Zhang, Shaohua Guo and Haoshen Zhou

ACS Appl. Mater. Interfaces, 2019, 11, 26817
DOI: 10.1021/acsami.9b06564

New O2/P2‐type Li‐Excess Layered Manganese Oxides as Promising Multi‐Functional Electrode Materials for Rechargeable Li/Na Batteries

Naoaki Yabuuchi, Ryo Hara, Masataka Kajiyama, Kei Kubota, Toru Ishigaki, Akinori Hoshikawa and Shinichi Komaba

Advanced Energy Materials, 2014, 4
DOI: 10.1002/aenm.201301453

Fabricating high-performance sodium ion capacitors with P2-Na0.67Co0.5Mn0.5O2 and MOF-derived carbon

Haichen Gu, Lingjun Kong, Huijuan Cui, Xianlong Zhou, Zhaojun Xie and Zhen Zhou

Journal of Energy Chemistry, 2019, 28, 79
DOI: 10.1016/j.jechem.2018.01.012

Electrochemistry and Solid‐State Chemistry of NaMeO2 (Me = 3d Transition Metals)

Kei Kubota, Shinichi Kumakura, Yusuke Yoda, Kazutoshi Kuroki and Shinichi Komaba

Advanced Energy Materials, 2018, 8
DOI: 10.1002/aenm.201703415

Utilizing Co2+/Co3+ Redox Couple in P2‐Layered Na0.66Co0.22Mn0.44Ti0.34O2 Cathode for Sodium‐Ion Batteries

Qin‐Chao Wang, Enyuan Hu, Yang Pan, Na Xiao, Fan Hong, Zheng‐Wen Fu, Xiao‐Jing Wu, Seong‐Min Bak, Xiao‐Qing Yang and Yong‐Ning Zhou

Advanced Science, 2017, 4
DOI: 10.1002/advs.201700219

Sodium‐Ion Batteries

Michael D. Slater, Donghan Kim, Eungje Lee and Christopher S. Johnson

Adv Funct Materials, 2013, 23, 947
DOI: 10.1002/adfm.201200691

Preparation of MoP2 nanoparticles as a novel anode material for sodium ion batteries

Zhen Li

Integrated Ferroelectrics, 2018, 192, 88
DOI: 10.1080/10584587.2018.1521672

Research progress of manganese-based layered oxides as cathode materials for potassium-ion batteries

Jun Cong, Shao-hua Luo, Kun Li, Shengxue Yan, Qing Wang, Yahui Zhang and Xin Liu

Journal of Electroanalytical Chemistry, 2022, 927, 116971
DOI: 10.1016/j.jelechem.2022.116971

Charge-discharge performance of Na 2/3 Fe 1/3 Mn 2/3 O 2 positive electrode in an ionic liquid electrolyte at 90 °C for sodium secondary batteries

Changsheng Ding, Toshiyuki Nohira and Rika Hagiwara

Electrochimica Acta, 2017, 231, 412
DOI: 10.1016/j.electacta.2017.02.069

Influence of Mn/Fe Ratio on Electrochemical and Structural Properties of P2-NaxMn1–yFeyO2 Phases as Positive Electrode Material for Na-Ion Batteries

Benoit Mortemard de Boisse, Dany Carlier, Marie Guignard, Elodie Guerin, Mathieu Duttine, Alain Wattiaux and Claude Delmas

Chem. Mater., 2018, 30, 7672
DOI: 10.1021/acs.chemmater.8b02953

Superior electrochemical performance of O3-type NaNi0.5-xMn0.3Ti0.2ZrxO2 cathode material for sodium-ion batteries from Ti and Zr substitution of the transition metals

Mingzhe Leng, Jianqiang Bi, Weili Wang, Zheng Xing, Weikang Yan, Xicheng Gao, Jingyu Wang and Rui Liu

Journal of Alloys and Compounds, 2020, 816, 152581
DOI: 10.1016/j.jallcom.2019.152581

Solid-state polymer nanocomposite electrolyte of TiO2/PEO/NaClO4 for sodium ion batteries

Yatim Lailun Ni'mah, Ming-Yao Cheng, Ju Hsiang Cheng, John Rick and Bing-Joe Hwang

Journal of Power Sources, 2015, 278, 375
DOI: 10.1016/j.jpowsour.2014.11.047

Identifying the Critical Role of Li Substitution in P2–Nax[LiyNizMn1–y–z]O2 (0 < x, y, z < 1) Intercalation Cathode Materials for High-Energy Na-Ion Batteries

Jing Xu, Dae Hoe Lee, Raphaële J. Clément, Xiqian Yu, Michal Leskes, Andrew J. Pell, Guido Pintacuda, Xiao-Qing Yang, Clare P. Grey and Ying Shirley Meng

Chem. Mater., 2014, 26, 1260
DOI: 10.1021/cm403855t

Exploration of Phase Compositions, Crystal Structures, and Electrochemical Properties of NaxFeyMn1–yO2 Sodium Ion Battery Materials

Steinar Birgisson, Troels Lindahl Christiansen and Bo B. Iversen

Chem. Mater., 2018, 30, 6636
DOI: 10.1021/acs.chemmater.8b01566

Enhanced electrochemical performance of Ti substituted P2-Na2/3Ni1/4Mn3/4O2 cathode material for sodium ion batteries

Wenwen Zhao, Akinobu Tanaka, Kyoko Momosaki, Shinji Yamamoto, Fabi Zhang, Qixin Guo and Hideyuki Noguchi

Electrochimica Acta, 2015, 170, 171
DOI: 10.1016/j.electacta.2015.04.125

Advancements in cathode technology, recycling strategies, and market dynamics: A comprehensive review of sodium ion batteries

Hossein Rostami, Johanna Valio, Pekka Suominen, Pekka Tynjälä and Ulla Lassi

Chemical Engineering Journal, 2024, 495, 153471
DOI: 10.1016/j.cej.2024.153471

Electrode Materials for Sodium-Ion Batteries: Considerations on Crystal Structures and Sodium Storage Mechanisms

Tianyi Wang, Dawei Su, Devaraj Shanmukaraj, Teofilo Rojo, Michel Armand and Guoxiu Wang

Electrochem. Energ. Rev., 2018, 1, 200
DOI: 10.1007/s41918-018-0009-9

New layered metal oxides as positive electrode materials for room-temperature sodium-ion batteries

Lin-Qin Mu, Yong-Sheng Hu and Li-Quan Chen

Chinese Phys. B, 2015, 24, 038202
DOI: 10.1088/1674-1056/24/3/038202

Advances on layered transition-metal oxides for sodium-ion batteries: a mini review

Jinlin Lu, Jinwen Zhang, Yingying Huang, Yi Zhang, Yansheng Yin and Shuo Bao

Front. Energy Res., 2023, 11
DOI: 10.3389/fenrg.2023.1246327

Structural characterization and electrochemical intercalation of Li+ in layered Na0.65Ni0.5Mn0.5O2 obtained by freeze-drying method

M. Kalapsazova, R. Stoyanova and E. Zhecheva

J Solid State Electrochem, 2014, 18, 2343
DOI: 10.1007/s10008-014-2399-x

First-Principles Prediction of Na Diffusivity in Doped NaCrO2 Layered Cathode Materials with van der Waals Interactions

Jialiang Wei, Leon Shaw and Wei Chen

J. Phys. Chem. C, 2020, 124, 12239
DOI: 10.1021/acs.jpcc.0c02274

High‐voltage performance of P2‐Na x Mn 0 . 5 Co 0 . 5 O 2 layered cathode material

Minh Le Nguyen, Hoang Van Nguyen, Nitika Ghosh, Akhil Garg, Man Van Tran and Phung Le

Intl J of Energy Research, 2022, 46, 5119
DOI: 10.1002/er.7504

High Capacity and High Efficiency Maple Tree-Biomass-Derived Hard Carbon as an Anode Material for Sodium-Ion Batteries

Yuesheng Wang, Zimin Feng, Wen Zhu, Vincent Gariépy, Catherine Gagnon, Manon Provencher, Dharminder Laul, René Veillette, Michel L. Trudeau, Abdelbast Guerfi and Karim Zaghib

Materials, 2018, 11, 1294
DOI: 10.3390/ma11081294

Direct atomic-scale confirmation of three-phase storage mechanism in Li4Ti5O12 anodes for room-temperature sodium-ion batteries

Yang Sun, Liang Zhao, Huilin Pan, Xia Lu, Lin Gu, Yong-Sheng Hu, Hong Li, Michel Armand, Yuichi Ikuhara, Liquan Chen and Xuejie Huang

Nat Commun, 2013, 4
DOI: 10.1038/ncomms2878

Zr-doped P2-Na0.75Mn0.55Ni0.25Co0.05Fe0.10Zr0.05O2 as high-rate performance cathode material for sodium ion batteries

Zheng-Yao Li, Rui Gao, Limei Sun, Zhongbo Hu and Xiangfeng Liu

Electrochimica Acta, 2017, 223, 92
DOI: 10.1016/j.electacta.2016.12.019

Synergistic Integration of P2/O3 Phases for Developing High‐Performance Sodium‐Ion Battery Cathodes

Greeshma Caroline, Shantikumar V. Nair and Senthilkumar Baskar

Energy Tech, 2026, 14
DOI: 10.1002/ente.202501633

The Layered Oxides in Lithium and Sodium‐Ion Batteries: A Solid‐State Chemistry Approach

Claude Delmas, Dany Carlier and Marie Guignard

Advanced Energy Materials, 2021, 11
DOI: 10.1002/aenm.202001201

Review—Manganese-Based P2-Type Transition Metal Oxides as Sodium-Ion Battery Cathode Materials

Raphaële J. Clément, Peter G. Bruce and Clare P. Grey

J. Electrochem. Soc., 2015, 162, A2589
DOI: 10.1149/2.0201514jes

Stacking Versatility in Alkali-Mixed Honeycomb Layered NaKNi2TeO6

Romain Berthelot, Jon Serrano-Sevillano, Bernard Fraisse, François Fauth, François Weill, Danielle Laurencin, Montse Casas-Cabanas, Dany Carlier, Gwenaëlle Rousse and Marie-Liesse Doublet

Inorg. Chem., 2021, 60, 14310
DOI: 10.1021/acs.inorgchem.1c01876

Influence of Synthesis Conditions on Electrochemical Properties of P2‐Type Na2/3Fe2/3Mn1/3O2 for Rechargeable Na Batteries

Wenwen Zhao, Yuka Tsuchiya and Naoaki Yabuuchi

Small Methods, 2019, 3
DOI: 10.1002/smtd.201800032

Progress on Fe‐Based Cathode Materials for Sodium‐Ion Batteries

Muhammad Hassan, Yanshuo Zhao, Qi Liu, Wenxiu He, Syed Ali Riza, Daobin Mu, Li Li, Renjie Chen and Feng Wu

Carbon Neutralization, 2025, 4
DOI: 10.1002/cnl2.70000

Layered Oxide Cathodes for Sodium‐Ion Batteries: Phase Transition, Air Stability, and Performance

Peng‐Fei Wang, Ya You, Ya‐Xia Yin and Yu‐Guo Guo

Advanced Energy Materials, 2018, 8
DOI: 10.1002/aenm.201701912

Three-dimensional lamination-like P2-Na 2/3 Ni 1/3 Mn 2/3 O 2 assembled with two-dimensional ultrathin nanosheets as the cathode material of an aqueous capacitor battery

Ying Zhang, Ke Ye, Kui Cheng, Guiling Wang and Dianxue Cao

Electrochimica Acta, 2014, 148, 195
DOI: 10.1016/j.electacta.2014.10.070

A zero-strain layered metal oxide as the negative electrode for long-life sodium-ion batteries

Yuesheng Wang, Xiqian Yu, Shuyin Xu, Jianming Bai, Ruijuan Xiao, Yong-Sheng Hu, Hong Li, Xiao-Qing Yang, Liquan Chen and Xuejie Huang

Nat Commun, 2013, 4
DOI: 10.1038/ncomms3365

A First‐Principles and Experimental Investigation of Nickel Solubility into the P2 NaxCoO2 Sodium‐Ion Cathode

Matteo Bianchini, Jingyang Wang, Raphaële Clément and Gerbrand Ceder

Advanced Energy Materials, 2018, 8
DOI: 10.1002/aenm.201801446

Stabilizing Layered Structure in Aqueous Electrolyte via O2‐Type Oxygen Stacking

Liang Xue, Chao Wang, Hanghui Liu, Hao Li, Tingting Chen, Zhengyi Shi, Ce Qiu, Mingqing Sun, Yin Huang, Jiangfeng Huang, Jingwen Sun, Pan Xiong, Junwu Zhu and Hui Xia

Advanced Science, 2022, 9
DOI: 10.1002/advs.202202194

Rational Design of a Complete Solid-Solution Reaction P2-Type Na-Ion Layered Oxide Cathode with High Performance

Jianxiang Gao, Hao Guo, Xuesheng Jiao, Zheng-Yao Li, Xiaobai Ma, Xufeng Hu, Qinghua Huang, Kai Sun and Dongfeng Chen

ACS Appl. Energy Mater., 2023, 6, 5753
DOI: 10.1021/acsaem.3c00135

Unveiling the Role of Ruthenium in Layered Sodium Cobaltite Toward High‐Performance Electrode Enabled by Anionic and Cationic Redox

Natalia Voronina, Konstantin Köster, Jun Ho Yu, Hee Jae Kim, Min‐Gi Jung, Hun‐Gi Jung, Kug‐Seung Lee, Payam Kaghazchi and Seung‐Taek Myung

Advanced Energy Materials, 2023, 13
DOI: 10.1002/aenm.202302017

New Insights into the Roles of Mg in Improving the Rate Capability and Cycling Stability of O3-NaMn0.48Ni0.2Fe0.3Mg0.02O2 for Sodium-Ion Batteries

Cheng Zhang, Rui Gao, Lirong Zheng, Yongmei Hao and Xiangfeng Liu

ACS Appl. Mater. Interfaces, 2018, 10, 10819
DOI: 10.1021/acsami.7b18226

Effect of Calcination Temperature on a P-type Na0.6Mn0.65Ni0.25Co0.10O2Cathode Material for Sodium-Ion Batteries

Ngoc-Anh Nguyen, Kyuman Kim, Kwang Ho Choi, Hyunkyu Jeon, Kyubock Lee, Myung-Hyun Ryou and Yong Min Lee

J. Electrochem. Soc., 2017, 164, A6308
DOI: 10.1149/2.0511701jes

Single Crystalline Na0.7MnO2 Nanoplates as Cathode Materials for Sodium‐Ion Batteries with Enhanced Performance

Dawei Su, Chengyin Wang, Hyo‐jun Ahn and Guoxiu Wang

Chemistry A European J, 2013, 19, 10884
DOI: 10.1002/chem.201301563

Na-deficient O3-type cathode material Na0.8[Ni0.3Co0.2Ti0.5]O2 for room-temperature sodium-ion batteries

Hao Guo, Yuesheng Wang, Wenze Han, Zhouxiang Yu, Xingguo Qi, Kai Sun, Yong-Sheng Hu, Yuntao Liu, Dongfeng Chen and Liquan Chen

Electrochimica Acta, 2015, 158, 258
DOI: 10.1016/j.electacta.2015.01.118

Suppressing the P2–O2 Phase Transition of Na0.67Mn0.67Ni0.33O2 by Magnesium Substitution for Improved Sodium‐Ion Batteries

Peng‐Fei Wang, Ya You, Ya‐Xia Yin, Yue‐Sheng Wang, Li‐Jun Wan, Lin Gu and Yu‐Guo Guo

Angewandte Chemie, 2016, 128, 7571
DOI: 10.1002/ange.201602202

Understanding the Effect of Zn Doping on Stability of Cobalt-Free P2-Na0.60Fe0.5Mn0.5O2 Cathode for Sodium Ion Batteries

Devendrasinh Darbar, M. V. Reddy and Indranil Bhattacharya

Electrochem, 2021, 2, 323
DOI: 10.3390/electrochem2020023

NaV6O15Nanoflakes with Good Cycling Stability as a Cathode for Sodium Ion Battery

Hanna He, Xianguang Zeng, Haiyan Wang, Na Chen, Dan Sun, Yougen Tang, Xiaobing Huang and Yingfen Pan

J. Electrochem. Soc., 2015, 162, A39
DOI: 10.1149/2.0151501jes

Operando powder X-ray diffraction study of P2-Na x Ni0.3Mn0.7O2 cathode material during electrochemical cycling

Solveig Kjeldgaard, Steinar Birgisson, Anette Gert Kielland and Bo Brummerstedt Iversen

J Appl Crystallogr, 2018, 51, 1304
DOI: 10.1107/S1600576718010531

Fabricating 3D ordered marcoporous Na2MnSiO4/C with hierarchical pores for fast sodium storage

Datong Zhang, Zhengping Ding, Ying Yang, Shuai Zhao, Qun Huang, Cheng Chen, Libao Chen and Weifeng Wei

Electrochimica Acta, 2018, 269, 694
DOI: 10.1016/j.electacta.2018.03.045

Lithium versus Mono/Polyvalent Ion Intercalation: Hybrid Metal Ion Systems for Energy Storage

Radostina Stoyanova, Violeta Koleva and Antonia Stoyanova

The Chemical Record, 2019, 19, 474
DOI: 10.1002/tcr.201800081

Current state-of-the-art characterization techniques for probing the layered oxide cathode materials of sodium-ion batteries

Qiuyu Shen, Yongchang Liu, Lifang Jiao, Xuanhui Qu and Jun Chen

Energy Storage Materials, 2021, 35, 400
DOI: 10.1016/j.ensm.2020.11.002

Fe‐Based Tunnel‐Type Na0.61[Mn0.27Fe0.34Ti0.39]O2 Designed by a New Strategy as a Cathode Material for Sodium‐Ion Batteries

Shuyin Xu, Yuesheng Wang, Liubin Ben, Yingchun Lyu, Ningning Song, Zhenzhong Yang, Yunming Li, Linqin Mu, Hai‐Tao Yang, Lin Gu, Yong‐Sheng Hu, Hong Li, Zhao‐Hua Cheng, Liquan Chen and Xuejie Huang

Advanced Energy Materials, 2015, 5
DOI: 10.1002/aenm.201501156