Issue 31, 2020

Surface-functionalized palladium catalysts for electrochemical CO2 reduction

Abstract

Rational design and synthesis of efficient catalysts for electrochemical CO2 reduction is a critical step towards practical CO2 electrolyzer systems. In this work, we report a strategy to tune the catalytic property of a metallic Pd catalyst by coating its surface with a polydiallyldimethyl ammonium (PDDA) polymer layer. The resulting PDDA-functionalized Pd/C catalysts exhibit an enhanced CO faradaic efficiency of ∼93% together with a current density of 300 mA cm−2 at −0.65 V versus reversible hydrogen electrode in comparison to non-functionalized and commercial Pd/C catalysts. X-ray photoelectron spectroscopy analysis reveals that the improvement can be attributed to the electron transfer from the quaternary ammonium groups of PDDA to Pd nanoparticles, weakening the CO binding energy on Pd. The weak CO adsorption on Pd was further confirmed by the CO temperature programmed desorption measurement and operando attenuated total reflection-Fourier-transform infrared analysis. Therefore, the incorporation of electron-donating groups could be an effective strategy to decrease the CO binding energy of a metallic catalyst for a high CO selectivity in CO2 electroreduction.

Graphical abstract: Surface-functionalized palladium catalysts for electrochemical CO2 reduction

Supplementary files

Article information

Article type
Paper
Submitted
27 мар 2020
Accepted
07 май 2020
First published
07 май 2020

J. Mater. Chem. A, 2020,8, 15884-15890

Author version available

Surface-functionalized palladium catalysts for electrochemical CO2 reduction

R. Xia, S. Zhang, X. Ma and F. Jiao, J. Mater. Chem. A, 2020, 8, 15884 DOI: 10.1039/D0TA03427D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements