Issue 7, 2024

Additive manufacturing of highly conductive carbon nanotube architectures towards carbon-based flexible thermoelectric generators

Abstract

Moving the fabrication of electronics from the conventional 2D orientation to 3D space, necessitates the use of sophisticated additive manufacturing processes which are capable to deliver multifunctional materials and devices with exceptional spatial resolution. In this study, it is reported the nozzle-guided 3D-printing of highly conductive, epoxy-dispersed, single-walled carbon nanotube (SWCNT) architectures with embedded thermoelectric (TE) properties, capable to exploit significant waste thermal energy from the environment. In order to achieve high-resolution and continuous printing with the SWCNT-based paste through a confined nozzle geometry, i.e. without agglomeration and nozzle clogging, a homogeneous epoxy resin-dispersed SWCNT paste was produced. As a result, various 3D-printed structures with high SWCNT concentration (10 wt%) were obtained via shear-mixing processes. The 3D printed p- and n-type epoxy-dispersed SWCNT-based thermoelements exhibit high power factors of 102 and 75 μW mK−2, respectively. The manufactured 3D carbon-based thermoelectric generator (3D-CTEG) has the ability to stably operate at temperatures up to 180 °C in ambient conditions (1 atm, relative humidity: 50 ± 5% RH), obtaining TE values of an open-circuit voltage VOC = 13.6 mV, short-circuit current ISC = 1204 μA, internal resistance RTEG = 11.3 Ohm, and a generated power output Pmax = 4.1 μW at ΔT = 100 K (with TCold = 70 °C). The approach and methodology described in this study aims to increase the flexibility of integration and additive manufacturing processes for advanced 3D-printed conceptual devices and the development of multifunctional materials.

Graphical abstract: Additive manufacturing of highly conductive carbon nanotube architectures towards carbon-based flexible thermoelectric generators

Article information

Article type
Paper
Submitted
19 мар 2024
Accepted
26 май 2024
First published
29 май 2024
This article is Open Access
Creative Commons BY license

Energy Adv., 2024,3, 1642-1652

Additive manufacturing of highly conductive carbon nanotube architectures towards carbon-based flexible thermoelectric generators

C. K. Mytafides, W. J. Wright, R. Gustinvil, L. Tzounis, G. Karalis, A. S. Paipetis and E. Celik, Energy Adv., 2024, 3, 1642 DOI: 10.1039/D4YA00182F

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements