Issue 30, 2022

Flexible 1.3 μm photodetector fabricated with InN nanowires and graphene on overhead projector transparency sheet

Abstract

We report the first demonstration of flexible photodetectors, operating at the wavelength window of 1.3 μm, fabricated with InN nanowires (NWs) and graphene on an overhead projector transparency (OHP) sheet. The InN NWs, used as an absorption medium for the device, were formed on a Si substrate and exhibited strong emission with a peak wavelength of 1.3 μm at room temperature. They were randomly and horizontally embedded in the graphene sandwich structure functioned as a carrier channel. The photocurrent and photoresponsivity of the flexible photodetector were found to be 1.17 mA and 0.48 A W−1, respectively, at a voltage of 1 V and a light intensity of 60 mW cm−2 of a xenon lamp. The photocurrent measured when the photodetector was bent under a strain of 3% was 1.15 mA, which corresponds to 98.3% compared to that before bending. Moreover, the photocurrent and photoresponsivity of the flexible photodetector measured after the 200 cyclic-bending tests are comparable to those measured before bending.

Graphical abstract: Flexible 1.3 μm photodetector fabricated with InN nanowires and graphene on overhead projector transparency sheet

Article information

Article type
Paper
Submitted
01 апр 2022
Accepted
25 июн 2022
First published
27 июн 2022

Nanoscale, 2022,14, 10793-10800

Flexible 1.3 μm photodetector fabricated with InN nanowires and graphene on overhead projector transparency sheet

J. Shin, H. Yang, S. Noh, S. Han and J. S. Kim, Nanoscale, 2022, 14, 10793 DOI: 10.1039/D2NR01802K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements