Issue 2, 2022

Atomic layer deposition of SnSex thin films using Sn(N(CH3)2)4 and Se(Si(CH3)3)2 with NH3 co-injection

Abstract

This study introduces the atomic layer deposition (ALD) of tin selenide thin films using Sn(N(CH3)2)4 and Se(Si(CH3)3)2 with NH3 co-injection. The co-injection of NH3 with Se(Si(CH3)3)2 is essential for film growth to convert the precursor into a more reactive form. The most critical feature of this specific ALD process is that the chemical composition (Sn/Se ratio) could be varied by changing the growth temperature, even for the given precursor injection conditions. The composition and morphology of the deposited films varied depending on the process temperature. Below 150 °C, a uniform SnSe2 thin film was deposited in an amorphous phase, maintaining the oxidation states of its precursors. Above 170 °C, the composition of the film changed to 1 : 1 stoichiometry due to the crystallization of SnSe and desorption of Se. A two-step growth sequence involving a low-temperature seed layer was devised for the high-temperature ALD of SnSe to improve surface roughness.

Graphical abstract: Atomic layer deposition of SnSex thin films using Sn(N(CH3)2)4 and Se(Si(CH3)3)2 with NH3 co-injection

Supplementary files

Article information

Article type
Paper
Submitted
15 окт 2021
Accepted
30 ноя 2021
First published
06 дек 2021

Dalton Trans., 2022,51, 594-601

Atomic layer deposition of SnSex thin films using Sn(N(CH3)2)4 and Se(Si(CH3)3)2 with NH3 co-injection

J. W. Jeon, C. Yoo, W. Kim, W. Choi, B. Park, Y. K. Lee and C. S. Hwang, Dalton Trans., 2022, 51, 594 DOI: 10.1039/D1DT03487A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements