Issue 42, 2020

Experimental and theoretical determination of physical properties of Sm2Bi2Fe4O12 ferromagnetic semiconductors

Abstract

Polycrystalline samples of Sm2Bi2Fe4O12 were produced by the standard solid state reaction method. The structural characterization revealed that the material crystallizes in an orthorhombic structure (Pnma # 62 space group). Scanning electron microscopic images showed granular and densified characteristics on the surface and inside the samples, with two well-differentiated grain sizes: micrometric and submicrometric. From energy-dispersive X-ray spectra, it was established that the samples contained the expected elements in stoichiometric proportions suggested by the chemical formula of the compound. IV curves and measurements of electrical permittivity as a function of temperature showed semiconductor-type behaviors, strongly dependent on the polycrystalline character of the material and a Maxwell–Wagner-type dielectric tendency. The optical spectral analysis corroborated the semiconductor behavior with the optical bandgap Eg = 2.62 eV. Temperature-dependent magnetization results have the expected form for ferromagnetic-type materials, with evidence of disorder that gives rise to magnetic irreversibility between the zero-field cooling and field cooling measurement procedures. Magnetization curves as a function of the applied field showed a hysterical response, even at room temperature, revealing the occurrence of ferromagnetic ordering in the material. The ab initio calculations of the electron density of states reveal the appearance of a mean semiconductor band gap whose value is in agreement with that measured experimentally. The effective magnetic moment is attributed to the majority contributions of the 3d-Fe orbitals. At low temperatures, the behaviors of the specific heat at constant volume and pressure are similar, with a tendency of the former towards the Dulong–Petit limit. Strong changes in all the thermophysical properties studied are evident due to the effects of pressure and temperature on the wave behavior of the crystal lattice. At higher temperatures, a strong variation in the Debye temperature induces divergence in thermophysical parameters for different applied pressures. The physical parameters related to the coexistence of the semiconductor and ferromagnetic properties in the material suggest possible technological implications in the spintronics industry.

Graphical abstract: Experimental and theoretical determination of physical properties of Sm2Bi2Fe4O12 ferromagnetic semiconductors

Supplementary files

Article information

Article type
Paper
Submitted
20 июн 2020
Accepted
25 сен 2020
First published
28 сен 2020

J. Mater. Chem. C, 2020,8, 14925-14938

Experimental and theoretical determination of physical properties of Sm2Bi2Fe4O12 ferromagnetic semiconductors

J. A. Cuervo Farfán, C. E. Deluque Toro, C. A. Parra Vargas, D. A. Landínez Téllez and J. Roa-Rojas, J. Mater. Chem. C, 2020, 8, 14925 DOI: 10.1039/D0TC02935A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements