Issue 46, 2020

Carbon dots–MnO2 nanocomposites for As(iii) detection in groundwater with high sensitivity and selectivity

Abstract

As(III) pollution has caused increasing concern due to its significant impact in environmental safety and human health. Carbon dots (CDs)–MnO2 nanocomposites were prepared and characterized for As(III) detection. The intense blue fluorescence of CDs can be greatly quenched by functionalization with MnO2 nanosheets due to the existence of the fluorescence resonance energy transfer (FRET) effect. CDs–MnO2 nanocomposites were then used as a fluorescence sensor for As(III) detection with high detection sensitivity and selectivity. The redox reaction between As(III) and MnO2 nanosheets can induce the decomposition of MnO2 and termination of the FRET process. Then the blue fluorescence originating from CDs can be recovered. The detection limit of CDs–MnO2 nanocomposites toward As(III) was calculated to be 16.8 nM (1.40 ppb) in a linear concentration range of 0–200 nM. CDs–MnO2 nanocomposites were also found to possess highly selective ability toward As(III) detection. In addition, the spiked and recovery test also confirmed the practicality and reliability of CDs–MnO2 nanocomposites toward As(III) detection in real water samples, such as groundwater etc. Our research has provided a reliable tool and strategy for visual detection of As(III) with outstanding sensing ability.

Graphical abstract: Carbon dots–MnO2 nanocomposites for As(iii) detection in groundwater with high sensitivity and selectivity

Supplementary files

Article information

Article type
Paper
Submitted
01 окт 2020
Accepted
13 окт 2020
First published
15 окт 2020

Anal. Methods, 2020,12, 5572-5580

Carbon dots–MnO2 nanocomposites for As(III) detection in groundwater with high sensitivity and selectivity

X. He, Y. Li, C. Yang, L. Lu, Y. Nie and X. Tian, Anal. Methods, 2020, 12, 5572 DOI: 10.1039/D0AY01846E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements