Issue 12, 2019

Facile and sustainable fabrication of transparent mesoporous IrOx films formed by nanoparticle assembly for efficient electrocatalytic water oxidation

Abstract

An efficient electrocatalyst film of iridium oxide (IrOx) with low iridium usage is pivotal towards improvement of the sustainability of sparse iridium-based catalysts. A new transparent mesoporous IrOx film consisting of small interconnected nanoparticles has been developed by simple drop-casting of a homogeneous solution containing a very low concentration of a hydroxyiridate complex and a polymer surfactant Pluronic F127 followed by annealing. The intrinsic activity of catalytic Ir-sites in the mesoporous IrOx-F127 film was higher than that of the IrOx-untemplate film at the same annealing temperature as indicated by cyclic voltammetry. Electrochemical impedance measurements suggested faster electron transport through interconnected nanoparticles of the mesoporous network in the former film compared with the discrete nanoparticulate structure in the latter. The high intrinsic activity of Ir-sites and efficient electron transport in the novel mesoporous structure contributed to the high electrocatalytic performance observed for the IrOx-F127 film annealed at 400 °C. The catalytic current of the IrOx-F127 film for water oxidation with respect to the iridium amount (Icat/Γcov) was 5.3 and 4.3 times higher than those of the transparent and efficient electrocatalyst films of the hitherto-reported 2D-hexagonal mesoporous IrOx (ChemSusChem, 2015, 8, 795–799) and nanoparticle IrOx(OH)y (ACS Catal., 2016, 6, 3946–3954), respectively.

Graphical abstract: Facile and sustainable fabrication of transparent mesoporous IrOx films formed by nanoparticle assembly for efficient electrocatalytic water oxidation

Supplementary files

Article information

Article type
Paper
Submitted
30 авг 2019
Accepted
01 окт 2019
First published
02 окт 2019

Sustainable Energy Fuels, 2019,3, 3489-3497

Facile and sustainable fabrication of transparent mesoporous IrOx films formed by nanoparticle assembly for efficient electrocatalytic water oxidation

D. Chandra, T. Sato, N. Abe, K. Saito, T. Yui and M. Yagi, Sustainable Energy Fuels, 2019, 3, 3489 DOI: 10.1039/C9SE00731H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements