Issue 9, 2019

Integration of electrocatalysts with silicon microcone arrays for minimization of optical and overpotential losses during sunlight-driven hydrogen evolution

Abstract

Microstructured photoelectrode morphologies can advantageously facilitate integration of optically absorbing electrocatalysts with semiconducting light absorbers, to maintain low overpotentials for fuel production without producing a substantial loss in photocurrent density. We report herein the use of arrays of antireflective, high-aspect-ratio Si microcones (μ-cones), coupled with light-blocking Pt and Co–P catalysts, as photocathodes for H2 evolution. Thick (∼16 nm) layers of Pt or Co–P deposited onto Si μ-cone arrays yielded absolute light-limited photocurrent densities of ∼32 mA cm−2, representing a reduction in light-limited photocurrent density of 6% relative to bare Si μ-cone-array photocathodes, while maintaining high fill factors and low overpotentials for H2 production from 0.50 M H2SO4(aq). The Si μ-cone arrays were embedded in a flexible polymeric membrane and removed from the Si substrate, to yield flexible photocathodes consisting of polymer-embedded arrays of free-standing μ-cones that evolved hydrogen from 0.50 M H2SO4(aq).

Graphical abstract: Integration of electrocatalysts with silicon microcone arrays for minimization of optical and overpotential losses during sunlight-driven hydrogen evolution

Supplementary files

Article information

Article type
Paper
Submitted
10 май 2019
Accepted
13 май 2019
First published
31 май 2019

Sustainable Energy Fuels, 2019,3, 2227-2236

Author version available

Integration of electrocatalysts with silicon microcone arrays for minimization of optical and overpotential losses during sunlight-driven hydrogen evolution

S. Yalamanchili, P. A. Kempler, Kimberly M. Papadantonakis, H. A. Atwater and N. S. Lewis, Sustainable Energy Fuels, 2019, 3, 2227 DOI: 10.1039/C9SE00294D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements