Issue 22, 2019

Selective hydrogenolysis of 2-furancarboxylic acid to 5-hydroxyvaleric acid derivatives over supported platinum catalysts

Abstract

The conversion of 2-furancarboxylic acid (FCA), which is produced by oxidation of furfural, to 5-hydroxyvaleric acid (5-HVA) and its ester/lactone derivatives with H2 was investigated. Monometallic Pt catalysts were effective, and other noble metals were not effective due to the formation of ring-hydrogenation products. Supports and solvents had a small effect on the performance; however, Pt/Al2O3 was the best catalyst and short chain alcohols such as methanol were better solvents. The optimum reaction temperature was about 373 K, and at higher temperature the catalyst was drastically deactivated by deposition of organic materials on the catalyst. The highest yield of target products (5-HVA, δ-valerolactone (DVL), and methyl 5-hydroxyvalerate) was 62%, mainly obtained as methyl 5-hydroxyvalerate (55% yield). The byproducts were mainly ring-hydrogenation compounds (tetrahydrofuran-2-carboxylic acid and its ester) and undetected ones (loss of carbon balance). The catalyst was gradually deactivated during reuses even at a reaction temperature of 373 K; however, the catalytic activity was recovered by calcination at 573 K. The reactions of various related substrates were carried out, and it was found that the O–C bond in the O–C[double bond, length as m-dash]C structure (1,2,3-position of the furan ring) is dissociated before C[double bond, length as m-dash]C hydrogenation while the presence and position of the carboxyl group (or methoxy carbonyl group) much affect the reactivity.

Graphical abstract: Selective hydrogenolysis of 2-furancarboxylic acid to 5-hydroxyvaleric acid derivatives over supported platinum catalysts

Supplementary files

Article information

Article type
Paper
Submitted
21 сен 2019
Accepted
09 окт 2019
First published
09 окт 2019

Green Chem., 2019,21, 6133-6145

Selective hydrogenolysis of 2-furancarboxylic acid to 5-hydroxyvaleric acid derivatives over supported platinum catalysts

T. Asano, H. Takagi, Y. Nakagawa, M. Tamura and K. Tomishige, Green Chem., 2019, 21, 6133 DOI: 10.1039/C9GC03315G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements