Issue 5, 2018

High-yield production of 2D crystals by wet-jet milling

Abstract

Efficient and scalable production of two-dimensional (2D) materials is required to overcome technological hurdles towards the creation of a 2D-material-based industry. Here, we present a novel approach developed for the exfoliation of layered crystals, i.e., graphite, hexagonal-boron nitride and transition metal dichalcogenides. The process is based on high-pressure wet-jet-milling (WJM), resulting in a 2 L h−1 production of 10 g L−1 of single- and few-layer 2D crystal flakes in dispersion making the scaling-up more affordable. The WJM process enables the production of defect-free and high quality 2D-crystal dispersions on a large scale, opening the way for their full exploitation in different commercial applications, e.g., as anode active material in lithium ion batteries, as reinforcement in polymer–graphene composites, and as conductive inks, as we demonstrate in this report.

Graphical abstract: High-yield production of 2D crystals by wet-jet milling

Supplementary files

Article information

Article type
Communication
Submitted
25 апр 2018
Accepted
06 июл 2018
First published
06 июл 2018

Mater. Horiz., 2018,5, 890-904

High-yield production of 2D crystals by wet-jet milling

A. E. Del Rio Castillo, V. Pellegrini, A. Ansaldo, F. Ricciardella, H. Sun, L. Marasco, J. Buha, Z. Dang, L. Gagliani, E. Lago, N. Curreli, S. Gentiluomo, F. Palazon, M. Prato, R. Oropesa-Nuñez, P. S. Toth, E. Mantero, M. Crugliano, A. Gamucci, A. Tomadin, M. Polini and F. Bonaccorso, Mater. Horiz., 2018, 5, 890 DOI: 10.1039/C8MH00487K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements