Issue 21, 2017

Multiferroic Bi2FeCrO6 based p–i–n heterojunction photovoltaic devices

Abstract

Photovoltaic devices made of ferroelectric films are being widely studied, due to their efficient charge separation driven by the internal polarization as well as above-bandgap generated photovoltages. These features may enable power conversion efficiencies (PCE) exceeding the Shockley–Queisser limit, which characterizes conventional semiconductor-based solar cells. However, improving the PCE of such devices is still a challenge, mainly due to the weak charge transport and collection induced by the recombination of photocarriers. Here, we fabricated p–i–n heterojunction devices based on double-perovskite multiferroic Bi2FeCrO6 thin films. The latter act as intrinsic absorbers, sandwiched between hole- and electron-transporting layers, a p-type NiO and an n-type Nb-doped SrTiO3 semiconductor, respectively. Under 1 sun illumination, the optimized p–i–n device yields an open-circuit voltage of 0.53 V and a short-circuit current density of 8.0 mA cm−2, leading to a PCE of ca. 2.0%, a four-fold enhancement compared to that of the i–n device architecture.

Graphical abstract: Multiferroic Bi2FeCrO6 based p–i–n heterojunction photovoltaic devices

Supplementary files

Article information

Article type
Paper
Submitted
21 фев 2017
Accepted
18 апр 2017
First published
18 апр 2017

J. Mater. Chem. A, 2017,5, 10355-10364

Multiferroic Bi2FeCrO6 based p–i–n heterojunction photovoltaic devices

W. Huang, C. Harnagea, D. Benetti, M. Chaker, F. Rosei and R. Nechache, J. Mater. Chem. A, 2017, 5, 10355 DOI: 10.1039/C7TA01604B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements