Issue 18, 2015

Alternating precursor layer deposition for highly stable perovskite films towards efficient solar cells using vacuum deposition

Abstract

An effective technique is developed to fabricate perovskite solar cells using alternating layer-by-layer vacuum deposition. The average efficiency of the planar device is 15.37% with a minimal standard deviation of ±0.37% and the best efficiency as high as 16.03%. Moreover, the device shows very good stability over 62 days with very little degradation <9% when stored under ambient conditions.

Graphical abstract: Alternating precursor layer deposition for highly stable perovskite films towards efficient solar cells using vacuum deposition

Supplementary files

Article information

Article type
Communication
Submitted
12 мар 2015
Accepted
24 мар 2015
First published
30 мар 2015

J. Mater. Chem. A, 2015,3, 9401-9405

Alternating precursor layer deposition for highly stable perovskite films towards efficient solar cells using vacuum deposition

D. Yang, Z. Yang, W. Qin, Y. Zhang, S. (. Liu and C. Li, J. Mater. Chem. A, 2015, 3, 9401 DOI: 10.1039/C5TA01824B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements