Issue 15, 2023

Halogen-induced planar defects in Cu catalysts for ammonia electrosynthesis at an ampere-level current density

Abstract

The electrocatalytic nitrate reduction reaction (NO3RR) provides an effective route for removing NO3 from wastewater and converting it to valuable ammonia (NH3). Here, we describe the halogen-incorporated Cu (Cu–X) catalysts derived from the in situ reduction of CuO nanoparticles in electrocatalytic NO3RR. Electrochemical reconstruction induces various defect active sites in Cu–X catalysts by doping different halogens. The coexisted planar twin boundary (TB) and stacking fault (SF) defects in the Cu–F electrode possess higher activity than sole SF defects in Cu–Cl and grain boundary (GB) defects in both Cu–Br and Cu–I electrodes. The electrochemical in situ spectroscopic analysis reveals that the simultaneous TB and SF defects in the Cu–F electrode enhance the adsorption capacity of reaction intermediates and improve the conversion efficiency of NO3 to NH3. An ampere-level current density of NH3 synthesis is achieved on the Cu–F electrode with a high yield rate of 5.22 mmol h−1 cm−2, faradaic efficiency of 96.2%, and stability over 24 h. This work provides a promising strategy to finely modulate active sites in the Cu catalyst for high-efficiency NH3 synthesis from NO3RR.

Graphical abstract: Halogen-induced planar defects in Cu catalysts for ammonia electrosynthesis at an ampere-level current density

Supplementary files

Article information

Article type
Research Article
Submitted
02 фев 2023
Accepted
20 апр 2023
First published
21 апр 2023

Mater. Chem. Front., 2023,7, 3093-3101

Halogen-induced planar defects in Cu catalysts for ammonia electrosynthesis at an ampere-level current density

Y. Wang, S. Xia, J. Zhang, A. K. Ummireddi, Z. Li, X. Yuan, C. Yu, Y. Zhang, J. Wu and Y. Wu, Mater. Chem. Front., 2023, 7, 3093 DOI: 10.1039/D3QM00114H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements