Issue 2, 2022

The modification effect of Fe2O3 nanoparticles on ZnO nanorods improves the adsorption and detection capabilities of TEA

Abstract

Surface modification is a simple and efficient method to enhance the gas sensing properties of semiconductor materials. In this paper, Fe2O3 nanoparticle-decorated ZnO nanorods are successfully fabricated by a facile two-step synthesis method. The SEM, TEM and XPS results indicate that the Fe2O3 nanoparticles grow directly on the surface of ZnO nanorods. The gas sensing properties of pure ZnO and Fe2O3/ZnO nanocomposites have been systematically analyzed. The gas response value of a 1 wt% Fe2O3/ZnO sample is 14.5 to 100 ppm triethylamine (TEA) at the optimal operating temperature of 260 °C, which is about 3 times that of pure ZnO (5.0). In addition, the 1 wt% Fe2O3/ZnO sensor reflects a rapid response/recovery time (1 s/14 s). The density functional theory (DFT) simulation results confirm that after the Fe2O3 cluster modifies the surface of ZnO, the atomic position at the interface changes significantly and the structure of Fe2O3/ZnO has the lowest adsorption energy for TEA molecules; these are the key factors for improving the gas sensitivity of the composite sample.

Graphical abstract: The modification effect of Fe2O3 nanoparticles on ZnO nanorods improves the adsorption and detection capabilities of TEA

Supplementary files

Article information

Article type
Research Article
Submitted
22 окт 2021
Accepted
11 ноя 2021
First published
12 ноя 2021

Inorg. Chem. Front., 2022,9, 259-266

The modification effect of Fe2O3 nanoparticles on ZnO nanorods improves the adsorption and detection capabilities of TEA

X. Liang, J. Zhang, K. Zhang, X. Yang and M. Zhang, Inorg. Chem. Front., 2022, 9, 259 DOI: 10.1039/D1QI01339D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements