LabPET II scanner performances improvement: Thermal stability control based on FPGA

Aziz Oukaira, Dhaou Said, Jamal Zbitou, Réjean Fontaine and Ahmed Lakhssassi

e-Prime - Advances in Electrical Engineering, Electronics and Energy, 2023, 6, 100360
DOI: 10.1016/j.prime.2023.100360

Recycling technologies for waste electrical and electronic equipment (WEEE) in developing countries: A systematic review

Darleen Jonathan Toro Sánchez

Environmental Research and Technology, 2025, 8, 755
DOI: 10.35208/ert.1510273

Techno-economic evaluation of electronic component recovery for reuse from waste PCBs: advancing circular economy practices in automotive electronics

Pallab Das, Adrian Leonardi, Qingyu Yan, Katharina Peier and Jean-Christophe P. Gabriel

J. Ind. Ecol., 2026
DOI: 10.1007/s44498-026-00028-w

Advanced Materials in Responsible Electronics: Innovations for Sustainability, Health, and Circularity

Rawan Omar, Jiawei Yang, Tan‐Phat Huynh, Kiran Gulia, Sooyun Caroline Tavolacci, Weiwei Wu, Yan Wang and Hossam Haick

Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202501020

Oxidant-assisted glycine leaching of gold from e-waste: optimization and kinetic analysis

Fulai Hao, Ye Zheng, Shibiao Zhang, Yanming Zhang, Ge Gao, Yanbai Shen and Shikai Zhao

Canadian Metallurgical Quarterly, 2025, 1
DOI: 10.1080/00084433.2025.2597057

CRUSADE project: Recycling technologies for ELV components to create a sustainable source of market grade materials for EU applications

Iakovos Yakoumis, Anastasia-Maria Moschovi, Olga Thoda, Asimina Katsiapi, Panagiota Stamatopoulou, Alexandros Charitos, Lesia Sandig-Predzymirska, Wambui Wamunyu, Sebeh Adjapong, Walter Murru, Francesco Veglio, Svetlana Zueva, Marco Passadoro, Antreas Afantitis, Dimitris Mintis, Andreas Tsoumanis, Eleni Papadopoulou, George Paloumpis, Nikolaos Theodoropoulos, Vasiliki Zogali, Panagiotis Xanthopoulos, Lydia Gerolymatou, Derya Dilara Ataş, Özak Durmuş, Mehmet Çelik, Naim Dönmez, Burak Güzeltepe, Yiğitcan Kama, Epameinondas Athanasakopoulos, Rosanna Babagiannou, Vincenzo Baglio, Carmelo Lo Vecchio, Irene Gatto, David Anguera Sempere, Jendrik Kromminga, Elena Santamarina, Andrés Fernández, Bjorn Gieseking, Camilo Prieto, Andrea Vincenzo Abbate, Manuel Di Frangia, Michela Spreghini, Francesco Di Muro, Diana Ferrara, Lucas Brockerhoff, Peter Weber, Philippe Lavoie, Dominique Von Sivers, Florian Witzel, Farzad Salehi, Deniz Koc, Giovanna Nicol, Renzo Costa, Flavio Parussa and Thomas Abo Atia

Comput Struct Biotechnol J, 2026, 33, 28
DOI: 10.1016/j.csbj.2025.12.016

Property Enhancement of Waste Printed Circuit Boards Powders Reinforced Polypropylene by In Situ Magnesium Hydroxide Impregnation from Waste Lye

Shenghui Tian, Jingwei Liu, Jiabao Gu, Chaoting Xie, Xiong Zhang and Xinlu Liu

Polymers, 2024, 16, 822
DOI: 10.3390/polym16060822

Automated Disassembly of Waste Printed Circuit Boards: The Role of Edge Computing and IoT

Muhammad Mohsin, Stefano Rovetta, Francesco Masulli and Alberto Cabri

Computers, 2025, 14, 62
DOI: 10.3390/computers14020062

Innovative Approaches to Tin Recovery from Low-Grade Secondary Resources: A Focus on (Bio)hydrometallurgical and Solvometallurgical Methods

Ewa Rudnik

Materials, 2025, 18, 819
DOI: 10.3390/ma18040819

Recent chemical methods for metals recovery from printed circuit boards: A review

Emmanuel A. Oke and Herman Potgieter

J Mater Cycles Waste Manag, 2024, 26, 1349
DOI: 10.1007/s10163-024-01944-4

Development of nanofibers functionalized with Cyanex 272 for selective recovery of gold from printed circuit board

Heliano Clemente Bernardo, Thiago Rodrigues Martins, Daniel Assumpção Bertuol and Eduardo Hiromitsu Tanabe

Polymers for Advanced Techs, 2024, 35
DOI: 10.1002/pat.6214

Achieving Chemical Recognition, Recycling, and Circularity With Radical Nanostructures

Arkaprava Das, Ewa Malgorzata Nowik‐Boltyk, Tobias Junghöfer, Elke Nadler, Farzan Gity, Paul K. Hurley, Zhimin Yang, Andrzej Rajca, Francesco Tavanti, Arrigo Calzolari and Maria Benedetta Casu

Adv Funct Materials, 2025, 35
DOI: 10.1002/adfm.202504323

Biodegradable Substrates for Rigid and Flexible Circuit Boards: A Review

Karel Dušek, Daniel Koc, Petr Veselý, Denis Froš and Attila Géczy

Advanced Sustainable Systems, 2025, 9
DOI: 10.1002/adsu.202400518

Preventing the Immense Increase in the Life-Cycle Energy and Carbon Footprints of LLM-Powered Intelligent Chatbots

Peng Jiang, Christian Sonne, Wangliang Li, Fengqi You and Siming You

Engineering, 2024, 40, 202
DOI: 10.1016/j.eng.2024.04.002

ElectroCom61: A multiclass dataset for detection of electronic components

Md. Faiyaz Abdullah Sayeedi, Anas Mohammad Ishfaqul Muktadir Osmani, Taimur Rahman, Jannatul Ferdous Deepti, Raiyan Rahman and Salekul Islam

Data in Brief, 2025, 59, 111331
DOI: 10.1016/j.dib.2025.111331

Co-pyrolysis of phenolic printed circuit boards with CaO and Ca(OH)2 mixture in a fluidized bed reactor: Optimization of the operating conditions and the kinetic analysis

Mahdi Haghi, Farzam Fotovat, Ali Shokri and Soheila Yaghmaei

Process Safety and Environmental Protection, 2024, 188, 735
DOI: 10.1016/j.psep.2024.05.135

Life cycle assessment (LCA) of circular consumer electronics based on IC recycling and emerging PCB assembly materials

Tianwei Zhang, Andrew Bainbridge, Jonathon Harwell, Shoushou Zhang, Mahmoud Wagih and Jeff Kettle

Sci Rep, 2024, 14
DOI: 10.1038/s41598-024-79732-1

Integrated Circuits from Lighting Equipment: Presence and Characterisation of Precious Metals (Ag, Au, Pd, and Pt)

Konstantinos M. Sideris, Konstantinos A. Liogas, Dimitrios Fragkoulis, Vassilis N. Stathopoulos and Panagiotis Sinioros

Recycling, 2025, 10, 175
DOI: 10.3390/recycling10050175

Comparative Assessment of Selective Disassembly Methods of End-of-Life PCB Using Multi-Criteria Analysis

Irwan Haryanto, Aulia Qisthi Mairizal, M. Akbar Rhamdhani and Radon Dhelika

Circ.Econ.Sust., 2026, 6
DOI: 10.1007/s43615-026-00867-6

GEN Self-Labeling Object Detector for PCB Recycling Evaluation

Leandro Honorato de S. Silva, Agostinho Freire, George O. A. Azevedo, Sérgio Campello Oliveira, Carlo M. R. da Silva and Bruno J. T. Fernandes

IEEE Open J. Comput. Soc., 2025, 6, 1041
DOI: 10.1109/OJCS.2025.3584297

Recovery of Strategic Metals from Waste Printed Circuit Boards with Deep Eutectic Solvents and Ionic Liquids

Urszula Domańska, Anna Wiśniewska and Zbigniew Dąbrowski

Processes, 2024, 12, 530
DOI: 10.3390/pr12030530

A High-Accuracy PCB Defect Detection Algorithm Based on Improved YOLOv12

Zhi Chen and Bingxiang Liu

Symmetry, 2025, 17, 978
DOI: 10.3390/sym17070978

Prioritization of upcycling and recycling applications for the management of waste printed circuit boards by using S-LCA and MCDM

Zerrin Günkaya, Zehra Gizem Eris, Aysun Özkan and Mufide Banar

Environmental Research and Technology, 2023, 6, 83
DOI: 10.35208/ert.1244563

Design strategies and willingness to pay for circular economy service policies in sustainable tourism

Sapta Suhardono, Thi Thanh Thuy Phan, Chun-Hung Lee and I Wayan Koko Suryawan

Environmental Challenges, 2025, 18, 101081
DOI: 10.1016/j.envc.2025.101081

Bioleaching of Gold from Printed Circuit Boards: Potential Sustainability of Thiosulphate

Zahra Ilkhani and Farid Aiouache

Recycling, 2025, 10, 87
DOI: 10.3390/recycling10030087

Eco-friendly utilization of recycled non-metallic PCB powder in polypropylene composites: effect of compatibilizers

Gwan Yoon, Ji-Hwan Yoon, Hyeonook Nam, He-xin Zhang and Keun-Byung Yoon

Iran Polym J, 2026
DOI: 10.1007/s13726-026-01607-1

Disassemblability Assessment of Power Electronic Converters for Improved Circularity

Tugce Turkbay Romano, Li Fang, Thècle Alix, Maud Rio, Julien Mélot, Fabrice Serrano, Pierre Lefranc, Yves Lembeye, Nicolas Perry and Jean-Christophe Crébier

Sustainability, 2024, 16, 4712
DOI: 10.3390/su16114712

Safety-driven Electronic Components disassembly through Human-Robot Collaboration framework

Nima Rahmani Choubeh, Mostafa Zarei, Walter Quadrini, Sergio Gusmeroli and Luca Fumagalli

Procedia Computer Science, 2025, 253, 1103
DOI: 10.1016/j.procs.2025.01.172

Selective Electrochemical Leaching of Copper from Fragmented Waste Printed Circuit Boards in an Alkaline Sulfate–Glycine Electrolyte

Olesya Tyumentseva, Kaster Kamunur, Lyazzat Mussapyrova, Aisulu Batkal and Rashid Nadirov

Metals, 2026, 16, 214
DOI: 10.3390/met16020214

Closed-loop bioleaching for mobile phones from the bioregeneration of the leaching agent to the recovery of metal: A review

Joan Morell, Conxita Lao-Luque, Montserrat Sole-Sardans, David Ribas, Xavier Guimerà and Antonio David Dorado

Journal of Industrial and Engineering Chemistry, 2025, 151, 90
DOI: 10.1016/j.jiec.2025.04.020

YOLO-MDMN: a new lightweight algorithm for efficient PCB defect detection

Zhe Tang, Xin Xiong, Hui Lan and Xi Hu

Meas. Sci. Technol., 2026, 37, 095003
DOI: 10.1088/1361-6501/ae46b6

Drivers and Pathways for the Recovery of Critical Metals from Waste‐Printed Circuit Boards

Dong Xia, Carmen Lee, Nicolas M. Charpentier, Yuemin Deng, Qingyu Yan and Jean‐Christophe P. Gabriel

Advanced Science, 2024, 11
DOI: 10.1002/advs.202309635

Closing the Loop on Circular Economy in Transportation Electrification: Reuse, Repurposing, and Recycling of Batteries, Power Electronics, and Electric Machines

Mostafa Fereydoonian, Kangbeen Lee, Chandika Kiriella, Jinyeong Moon and Woongkul Lee

IEEE J. Emerg. Sel. Top. Ind. Electron., 2025, 6, 931
DOI: 10.1109/JESTIE.2025.3530914

Fabrication of industrial grade F/g-C3N4 reinforced banana natural Fiber sustainable PCB substrates

Dola Sundeep, Eswaramoorthy K Varadharaj and C. Chandrasekhara Sastry

Sci Rep, 2025, 15
DOI: 10.1038/s41598-025-04966-6

An organic acid-ammonium salt system for efficient desoldering of Sn-Pb solder and separation of electronic components from waste printed circuit boards

Saihui Peng, Haolin Zhang, Zhongyi Zhang, Xuhui Fang, Qing Huang and Wenyi Yuan

Journal of Environmental Chemical Engineering, 2026, 14, 121072
DOI: 10.1016/j.jece.2026.121072

Reversible Adhesive Film with Ultralow Dielectric Loss in High Frequency via Surface Anchoring of Catechol

Jiading Wang, Ruikun Wang, Shengqiang Nie, Shaoyun Guo and Xianlong Zhang

ACS Appl. Mater. Interfaces, 2024, 16, 54645
DOI: 10.1021/acsami.4c12258

Thermodynamic Modeling and Investigation of Chemical Looping Reformer Integrated with Gasifier for Hydrogen Production Using Novel E-Waste Oxygen Carriers

Chandramani Rai, Trashna Thakur and Pratibha Sharma

Process Integr Optim Sustain, 2025
DOI: 10.1007/s41660-025-00612-w

From e-waste to resource: Identifying the optimal pre-treatment for copper recovery from waste PCBs

Moisés Gómez, Daniel Peña-Torres, Melanie Colet-Lagrille, Katherine Jaramillo, I.M.S.K. Ilankoon and Xianlai Zeng

Resources, Conservation and Recycling, 2026, 228, 108821
DOI: 10.1016/j.resconrec.2026.108821

Preparation of Composite Materials Based on Acrylonitrile–Butadiene–Styrene Flame-Retardant Plastic Obtained from Electronic Waste and Fly Ash Microspheres, with Thermogravimetric/Differential Scanning Calorimetry Analysis and a Study of the Mechanical Characteristics of the Obtained Material

Natalya Kulenova, Ruslan Sapinov, Marzhan Sadenova and Zhanserik Shoshay

Processes, 2025, 13, 1045
DOI: 10.3390/pr13041045

Mechanical disassembly of waste PCBs: review of methods for removing through-hole technology and surface-mount technology components

I. Haryanto, M. A. Rhamdhani and R. Dhelika

Int. J. Environ. Sci. Technol., 2026, 23
DOI: 10.1007/s13762-025-06903-6