Issue 8, 2023

Electrocatalytic valorization of waste polyethylene furanoate (PEF) bioplastics for the production of formic acid and hydrogen energy

Abstract

The use of bio-based plastics instead of fossil-derived plastics is a possible solution to mitigate the negative impact of energy crisis and climate change caused by extensive use of non-renewable fossil resources. Polyethylene furanoate (PEF) plastics are regarded as a potential alternative to replace polyethylene terephthalate (PET) plastics due to its sustainability and biodegradability, but they face similar problems including long degradation time and waste of carbon resources. In this work, different cobalt-based oxide catalysts have been used as electrocatalysts for the selective oxidation of PEF hydrolysates to produce formate. It was found that a NiCo2O4 electrocatalyst could achieve 85.8% conversion and a high faradaic efficiency of 98% towards formate production under the reaction conditions of ethylene glycol (EG) oxidation (pH = 14) at a constant potential of 1.40 V vs. reversible hydrogen electrode (RHE). In contrast to PEF degradation to waste organics and CO2 in the open environment, the electrochemical approach presented in this work provides an alternative strategy to produce valuable chemicals and hydrogen energy using waste PEF plastics.

Graphical abstract: Electrocatalytic valorization of waste polyethylene furanoate (PEF) bioplastics for the production of formic acid and hydrogen energy

Supplementary files

Article information

Article type
Paper
Submitted
13 jan 2023
Accepted
28 fev 2023
First published
13 abr 2023

React. Chem. Eng., 2023,8, 1937-1942

Electrocatalytic valorization of waste polyethylene furanoate (PEF) bioplastics for the production of formic acid and hydrogen energy

L. Ren, S. Yang, J. Wang, T. Zhang, X. Li, T. Wang and Y. Zhao, React. Chem. Eng., 2023, 8, 1937 DOI: 10.1039/D3RE00028A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements