Issue 1, 2023

Development of a high surface area Cu electrocatalyst for effective nitrous oxide reduction reaction

Abstract

Electrochemical reduction of nitrous oxide (N2ORR) into benign nitrogen (N2) under mild reaction conditions is one approach for reducing emissions of this long-lived anthropogenic greenhouse gas and their environmental impact. In this work, high surface area Cu was investigated as a non-noble N2ORR catalyst alternative to conventional noble metals such as Pd, Pt, and Ir. Nanostructured Cu2O was electrodeposited onto a Cu substrate and electrochemically reduced to metallic Cu prior to the reaction. When compared to a flat Cu electrode, the high surface area Cu results in a 130 mV improved onset potential and 3.5 times higher N2 partial current density. The specific activity of the high surface area Cu indicates that the improved activity is due to the increased electrochemically active surface area. However, the mass transport of reactants becomes limiting at a very large surface area. Peak activity is observed on a Cu electrode with a surface area that is ∼30 times the geometric surface area. The stability test shows that the electrode can maintain its high surface area and catalytic activity for at least 7 hours, demonstrating that high surface area Cu is a viable alternative to noble metal N2ORR catalysts, outperforming other non-noble catalysts previously reported.

Graphical abstract: Development of a high surface area Cu electrocatalyst for effective nitrous oxide reduction reaction

Supplementary files

Article information

Article type
Paper
Submitted
21 jun 2022
Accepted
20 set 2022
First published
22 set 2022

React. Chem. Eng., 2023,8, 84-95

Development of a high surface area Cu electrocatalyst for effective nitrous oxide reduction reaction

S. Nilvichean, K. Meesombad, T. Butburee, P. Chakthranont and R. Methaapanon, React. Chem. Eng., 2023, 8, 84 DOI: 10.1039/D2RE00249C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements