Issue 1, 2019

Effects of geochemical conditions, surface modification, and arsenic (As) loadings on As release from As-loaded nano zero-valent iron in simulated groundwater

Abstract

Arsenic (As) released from As-loaded nano zero-valent iron (nZVI) after As(V) remediation could become an environmental hazard, thus deserving in-depth investigations. This study investigated As release from As-loaded nZVI under different geochemical conditions (i.e., pH, Ca2+, and humic acid (HA) concentrations), as well as the effects of nZVI surface modification (chitosan and polyaniline) and As loadings (low and high) on As release. Alkaline condition (pH = 9) and the presence of humic acid were found to enhance As release from all the types of nZVI samples. Ca2+ had no effect on As release for all the types of nZVI at both As loadings, except for chitosan- and polyaniline-modified nZVI at high As loading when Ca2+ concentrations increased up to 16 mg L−1. At low As loading, surface modification had a limited impact on As release from As-loaded nZVI. When As loading was high, a higher percentage of As was released from pristine nZVI than those from both the types of modified nZVI. This is because pristine nZVI either formed only monodentate complexes or had a higher ratio of As(III)/As(V). Under the same geochemical conditions, As released from all the types of As-loaded nZVI at high As loadings was lower than that at low As loadings. This is due to the formation of bidentate complexes with stronger bindings and lower ratios of As(III)/As(V) for high As loadings. These findings provide a fundamental understanding regarding the environmental behaviors of As-loaded nZVI under natural conditions and the risk associated with the release of As from As-loaded nZVI.

Graphical abstract: Effects of geochemical conditions, surface modification, and arsenic (As) loadings on As release from As-loaded nano zero-valent iron in simulated groundwater

Supplementary files

Article information

Article type
Paper
Submitted
25 out 2018
Accepted
20 nov 2018
First published
21 nov 2018

Environ. Sci.: Water Res. Technol., 2019,5, 28-38

Effects of geochemical conditions, surface modification, and arsenic (As) loadings on As release from As-loaded nano zero-valent iron in simulated groundwater

Z. Yu, J. Huang, L. Hu, W. Zhang and I. M. C. Lo, Environ. Sci.: Water Res. Technol., 2019, 5, 28 DOI: 10.1039/C8EW00757H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements