Issue 18, 2018

Low-temperature fabrication of solution-processed hafnium oxide gate insulator films using a thermally purified solution process

Abstract

We proposed a simple method, a thermally purified solution (TPS) process, to lower the fabrication temperature of solution-processed hafnium oxide (HfOx) gate insulator films. The TPS process is proceeded by transferring thermal energy to the HfOx precursor solution ‘BEFORE’ film formation. The TPS process could induce chemical reactions including pre-hydrolysis by thermal energy in the HfOx precursor solution. These chemical reactions reduce the required thermal energy for forming a solution-processed HfOx film and improve the film quality. As a result, the HfOx film fabricated via the TPS process has satisfactory dielectric characteristics: a breakdown electric field of ∼6 MV cm−1, a leakage current density of ∼10−9 A cm−2, and a dielectric constant of 10.23 at low temperatures, i.e., below 200 °C. Solution-processed indium oxide (In2O3) thin film transistors with a HfOx gate insulator fabricated via the TPS process exhibit a field effect mobility of 3.67 cm2 V−1 s−1, an on/off current ratio of 9.8 × 106, and a subthreshold swing of 0.18 V dec−1.

Graphical abstract: Low-temperature fabrication of solution-processed hafnium oxide gate insulator films using a thermally purified solution process

Supplementary files

Article information

Article type
Paper
Submitted
22 fev 2018
Accepted
09 abr 2018
First published
11 abr 2018

J. Mater. Chem. C, 2018,6, 4928-4935

Low-temperature fabrication of solution-processed hafnium oxide gate insulator films using a thermally purified solution process

J. Chung, Y. J. Tak, W. Kim, J. W. Park, T. S. Kim, J. H. Lim and H. J. Kim, J. Mater. Chem. C, 2018, 6, 4928 DOI: 10.1039/C8TC00899J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements