Issue 46, 2018

A mechanically strong and sensitive CNT/rGO–CNF carbon aerogel for piezoresistive sensors

Abstract

Compressible carbon materials hold great promise for application in various wearable or flexible electronic devices because of their low density, chemical and thermal stability, and high electrical conductivity. However, it is a great challenge to fabricate a carbon material with excellent mechanical performance and high sensitivity due to the brittleness of carbon. In this work, we fabricate a high-performance and lightweight CNT/rGO–CNF carbon aerogel by two key strategies: (1) forming continuous and ordered wave-shaped rGO layers and (2) reinforcing the carbon layers. It is found that cellulose nanofibers (CNFs) play a very important role in enhancing the interaction of rGO and CNTs, while CNTs give rise to strong yet flexible wave-shape layers. Benefiting from the synergistic effect of CNTs and CNFs, the carbon aerogel exhibits ultrahigh compressibility (up to 95% strain), superior elasticity (94.6% height retention for 50 000 cycles), high sensitivity, and an ultralow detection limit for pressure (0.875 Pa). These advantages make it an excellent candidate for fabricating flexible wearable electronic devices for biosignal detection.

Graphical abstract: A mechanically strong and sensitive CNT/rGO–CNF carbon aerogel for piezoresistive sensors

Supplementary files

Article information

Article type
Paper
Submitted
26 set 2018
Accepted
25 out 2018
First published
25 out 2018

J. Mater. Chem. A, 2018,6, 23550-23559

A mechanically strong and sensitive CNT/rGO–CNF carbon aerogel for piezoresistive sensors

X. Peng, K. Wu, Y. Hu, H. Zhuo, Z. Chen, S. Jing, Q. Liu, C. Liu and L. Zhong, J. Mater. Chem. A, 2018, 6, 23550 DOI: 10.1039/C8TA09322A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements