Issue 10, 2016

Characterisation of nanoscale carbide precipitation in as-cast Co–Cr–W-based dental alloys

Abstract

Carbide precipitation in biomedical Co–Cr alloys significantly influences the performance in terms of mechanical properties and corrosion resistance. In this study, we examined the carbide precipitation associated with local solute partitioning in as-cast Co–Cr–W-based dental alloys at the micro- and nano-scale. Co–28Cr–9W–1Si (mass%) alloys with carbon concentrations ranging from 0.01 to 0.33 mass% were prepared. It was found that Cr, W, Si, and C segregated at the interdendritic regions of the face-centered cubic (fcc) γ-grain microstructures, resulting in precipitation; the amount of interdendritic precipitates was found to increase with increasing bulk carbon concentration. We identified, for the first time, the nanosized mixed-phase constituents, which were composed of ∼100 nm fine grains of the γ-phase and M23C6-type carbide, at the interdendritic regions of the high-carbon Co–Cr–W alloy. These nanosized M23C6 carbides were produced with a cube-on-cube orientation relationship ([001]γ||[001]M23C6 and (100)γ||(100)M23C6) with the surrounding submicron γ-grains, while the local morphology changed from equiaxed to plate-like morphology. Nanoscale partitioning of the alloying elements was considered to be the origin of the interdendritic nanostructured constituents. As such, the nanoscale elemental partitioning was observed to alter the local mechanical properties and to affect the corrosion resistance of the alloys. The observed results indicate the importance of local chemistry—which has not received sufficient attention to date—along with carbide precipitation in the optimization of alloy design for achieving desirable properties such as high strength, ductility, and corrosion resistance in dental Co–Cr-based cast alloys.

Graphical abstract: Characterisation of nanoscale carbide precipitation in as-cast Co–Cr–W-based dental alloys

Article information

Article type
Paper
Submitted
07 jan 2016
Accepted
01 fev 2016
First published
05 fev 2016

J. Mater. Chem. B, 2016,4, 1778-1786

Characterisation of nanoscale carbide precipitation in as-cast Co–Cr–W-based dental alloys

K. Yamanaka, M. Mori, K. Sato and A. Chiba, J. Mater. Chem. B, 2016, 4, 1778 DOI: 10.1039/C6TB00040A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements