Issue 37, 2022

Mixed ionic and electronic conducting binders containing PEDOT:PSS and organic ionic plastic crystals toward carbon-free solid-state battery cathodes

Abstract

The performance of next generation solid-state lithium metal batteries (LMBs) is intimately related to the ionic-electronic interconnection within the cathode material. In batteries containing liquid electrolytes, the soaking of the electrolyte and the addition of carbon provide sufficient ionic and electronic conductivity through the cathode. However, in solid-state systems, cathodes are completely dry, and thus, they lack mobile Li ions and good electronic interconnection. Organic mixed ionic-electronic conductors (OMIECs) are promising binders to provide that interconnection through a compact carbon-free cathode. However, most of the OMIECs have been developed based on solvent swelling of conducting polymers or combining with ionic liquids as composites. These options are not the most adequate ones for LMBs due to liquid-related issues such as leakage. Here, a novel approach towards all-solid-state OMIECs is presented by combining PEDOT:PSS and different organic ionic plastic crystals (OIPCs): C2mpyrFSI and C2mpyrTFSI, obtaining a synergistic effect with higher ionic and electronic conductivities than those of the neat materials (σelectronic of 580 S cm−1 and σionic of 3.7 10−5 S cm−1 at 70 °C). These outstanding values for all-solid state OMIECs resulted from highly ordered conducting pathways as demonstrated by XRD and AFM. The optimum composition with respect to electronic and ionic conductivity (80/20 PEDOT:PSS/C2mpyFSI) was subsequently tested, for the first time, as a binder in a LiFePO4 cathode formulation in a carbon-free solid-state battery. The solid-state Li|LiFePO4 cell with the OMIEC binder showed an enhanced discharge capacity (157 mA h g−1 at C/10) and improved rate capability, in comparison to a solid-state cathode formulation using an ionic conducting polymeric binder and carbon additive. A specific capacity of 145.5 mA h g−1 at C/2 rate was achieved with an excellent capacity retention of 99.7% (145.2 mA h g−1) after 500 cycles.

Graphical abstract: Mixed ionic and electronic conducting binders containing PEDOT:PSS and organic ionic plastic crystals toward carbon-free solid-state battery cathodes

Supplementary files

Article information

Article type
Paper
Submitted
09 nov 2021
Accepted
11 abr 2022
First published
12 abr 2022

J. Mater. Chem. A, 2022,10, 19777-19786

Mixed ionic and electronic conducting binders containing PEDOT:PSS and organic ionic plastic crystals toward carbon-free solid-state battery cathodes

R. del Olmo, T. C. Mendes, M. Forsyth and N. Casado, J. Mater. Chem. A, 2022, 10, 19777 DOI: 10.1039/D1TA09628A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements