Issue 55, 2022

MnO2-based materials for supercapacitor electrodes: challenges, strategies and prospects

Abstract

Manganese dioxide (MnO2) has always been the ideal electrode material for supercapacitors due to its non-toxic nature and high theoretical capacity (1370 F gāˆ’1). Over the past few years, significant progress has been made in the development of high performance MnO2-based electrode materials. This review summarizes recent research progress in experimental, simulation and theoretical studies for the modification of MnO2-based electrode materials from different perspectives of morphology engineering, defect engineering and heterojunction engineering. Several main approaches to achieve enhanced electrochemical performance are summarized, respectively increasing the effective active site, intrinsic conductivity and structural stability. On this basis, the future problems and research directions of electrode materials are further envisaged, which provide theoretical guidance for the adequate design and synthesis of MnO2-based electrode materials for use in supercapacitors.

Graphical abstract: MnO2-based materials for supercapacitor electrodes: challenges, strategies and prospects

Article information

Article type
Review Article
Submitted
21 out 2022
Accepted
28 nov 2022
First published
12 dez 2022
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2022,12, 35556-35578

MnO2-based materials for supercapacitor electrodes: challenges, strategies and prospects

J. Liu, J. Bao, X. Zhang, Y. Gao, Y. Zhang, L. Liu and Z. Cao, RSC Adv., 2022, 12, 35556 DOI: 10.1039/D2RA06664E

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements