Issue 5, 2021

Quantifying an acceptable open-circuit corrosion current for aluminum–air batteries

Abstract

Primary aluminum–air batteries achieve impressive specific-energy values but suffer from poor shelf life due to corrosion of the aluminum anode in aqueous electrolytes. To solve this problem, researchers investigate numerous corrosion-mitigation strategies. Few rigorously compare the performance of these strategies, and most fail to define a technologically acceptable open-circuit corrosion current. To compete with commercialized zinc–air batteries, aluminum–air batteries need open-circuit corrosion currents less than 0.01 mA cmgeo−2, which we derive by performing a sensitivity analysis on a corrosion model reported here. By conducting a meta-analysis using reported aluminum–air cells, we find that certain ionic-liquid electrolytes and oil-displacement systems enable corrosion currents that meet this metric. In contrast, values for commonly reported aluminum–air batteries using alkaline electrolytes are orders of magnitude too high. Once the aluminum–air community focuses on advancing appropriate corrosion-mitigation strategies, laboratory findings may become commercially relevant.

Graphical abstract: Quantifying an acceptable open-circuit corrosion current for aluminum–air batteries

Supplementary files

Article information

Article type
Perspective
Submitted
21 dez 2020
Accepted
03 fev 2021
First published
23 fev 2021
This article is Open Access
Creative Commons BY-NC license

Mater. Adv., 2021,2, 1595-1599

Quantifying an acceptable open-circuit corrosion current for aluminum–air batteries

B. J. Hopkins and D. R. Rolison, Mater. Adv., 2021, 2, 1595 DOI: 10.1039/D0MA01002B

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements