Issue 10, 2021

ICP-MS spatial profiles in presence of ethanol and their application for the analysis of ethanol containing samples

Abstract

A total sample consumption system (hTISIS) was used for the first time to evaluate the plasma spatial ion profile for ethanolic samples in ICP-MS. The effects of the extraction lens voltages, the inner diameter of the torch injector, the plasma sampled zone, spray chamber temperature and nebulizer and high matrix introduction gas flow rates on the plasma ion cloud distribution were systematically studied. Regarding the minimization of matrix effects caused by ethanolic matrices, it was found that extraction lenses voltages and the injector inner diameter played a key role when the hTISIS was set at 300 °C. Under these conditions, the aerosol transport interferences were eliminated. The combination of the widest injector (2.5 mm id) with a 5 V extra lens voltage allowed the mitigation of the matrix effects. Moreover, it was observed that for a 2.5 mm id injector, the interferences could be mitigated irrespectively of the plasma sampled volume. Meanwhile, for narrower injectors, it was necessary to carefully select the plasma sampled zone. Finally, the accurate determination of As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Rb, Sr, V and Zn in bioethanol and beverages (wine, whiskey, gyn, vodka, rum and apple liqueur) was performed under optimum experimental conditions.

Graphical abstract: ICP-MS spatial profiles in presence of ethanol and their application for the analysis of ethanol containing samples

Supplementary files

Article information

Article type
Paper
Submitted
18 abr 2021
Accepted
12 ago 2021
First published
18 ago 2021

J. Anal. At. Spectrom., 2021,36, 2085-2096

ICP-MS spatial profiles in presence of ethanol and their application for the analysis of ethanol containing samples

C. Sánchez, R. Sánchez, C. Lienemann and J. Todolí, J. Anal. At. Spectrom., 2021, 36, 2085 DOI: 10.1039/D1JA00134E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements