Issue 31, 2021

Surface energy driven miscibility gap suppression during nucleation of III–V ternary alloys

Abstract

The existence of a miscibility gap limits the range of solid compositions which are possible to achieve under near-equilibrium growth conditions. Circumventing the miscibility gap is of paramount importance for device fabrication. We propose that one of the suppression mechanisms is the nucleus surface energy and explain how the surface energy influences the miscibility gap during nucleation from a liquid melt. By doing this, we start with the formation of the critical nucleus of a ternary alloy considering its surface energy as a combination of the binary ones. For certain nucleation scenarios in the InGaAs materials system we show that the compositional independence of the surface energy term is a good approximation due to similar values for InAs and GaAs pairs. However, a large difference in the surface energies of the two materials may lead to a significant modification of the liquid–solid composition dependence and a complete suppression of the miscibility gap.

Graphical abstract: Surface energy driven miscibility gap suppression during nucleation of III–V ternary alloys

Article information

Article type
Paper
Submitted
04 jun 2021
Accepted
05 jul 2021
First published
06 jul 2021
This article is Open Access
Creative Commons BY-NC license

CrystEngComm, 2021,23, 5284-5292

Surface energy driven miscibility gap suppression during nucleation of III–V ternary alloys

E. D. Leshchenko and J. Johansson, CrystEngComm, 2021, 23, 5284 DOI: 10.1039/D1CE00743B

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements