Issue 3, 2020

Electrochemical and photoelectrochemical water splitting with a CoOx catalyst prepared by flame assisted deposition

Abstract

A novel flame-assisted deposition (FAD) method was used to generate and immobilize cobalt oxide (CoOx) on the surface of fluorine-doped tin oxide (FTO) and TiO2 modified hematite (TiO2/Fe2O3) for electrochemical and photoelectrochemical (PEC) water oxidation, respectively, with significant performance.

Graphical abstract: Electrochemical and photoelectrochemical water splitting with a CoOx catalyst prepared by flame assisted deposition

Supplementary files

Article information

Article type
Communication
Submitted
10 out 2019
Accepted
02 dez 2019
First published
02 dez 2019

Dalton Trans., 2020,49, 588-592

Electrochemical and photoelectrochemical water splitting with a CoOx catalyst prepared by flame assisted deposition

F. Li, Z. Zhao, H. Yang, D. Zhou, Y. Zhao, Y. Li, W. Li, X. Wu, P. Zhang and L. Sun, Dalton Trans., 2020, 49, 588 DOI: 10.1039/C9DT03983J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements