Issue 6, 2019

Simulation of exotherms from the oxidation of accumulated carbonaceous species over a VSCR catalyst

Abstract

Vanadium based SCR (VSCR) catalysts are widely used for NOx reduction in diesel aftertreatment applications. However, HC species present in engine exhaust can lead to the accumulation of carbonaceous species (CS) over VSCR catalysts, especially under low temperature conditions. In addition to CS blocking VSCR active sites which results in decreased NOx conversion, the sudden burn-off of accumulated CS on VSCR can also lead to strong exotherms due to its high energy content. This work investigates the exotherms generated by accumulated CS from a theoretical perspective. First, temperature programmed oxidation (TPO) experiments are used to characterize CS oxidation kinetics. A mathematical model describing exotherms resulting from the oxidation of accumulated CS is then built and used to quantitatively describe the effects of diesel engine operating conditions and CS oxidation characteristics on exotherms. The results reveal that higher CS loading, lower space velocity and higher temperature ramping rate lead to more severe exotherms, while the reactivity of the CS also plays a critical role in the behavior of the exotherm. Finally, a drop to idle event is simulated to demonstrate an exotherm under transient operating conditions to reveal the combination of the various effects.

Graphical abstract: Simulation of exotherms from the oxidation of accumulated carbonaceous species over a VSCR catalyst

Article information

Article type
Paper
Submitted
07 nov 2018
Accepted
05 abr 2019
First published
05 abr 2019

React. Chem. Eng., 2019,4, 1090-1102

Simulation of exotherms from the oxidation of accumulated carbonaceous species over a VSCR catalyst

Y. Xi, N. A. Ottinger and Z. G. Liu, React. Chem. Eng., 2019, 4, 1090 DOI: 10.1039/C8RE00291F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements