Issue 46, 2018

Low threshold lasing from novel thulium-incorporated C(NH2)3PbI3 perovskite thin films in Fabry–Pérot resonator

Abstract

Organic–inorganic hybrid halide perovskites are desirable candidates for application in photovoltaics and lasing. However, enhancing the lasing performances of these perovskites with a lower threshold and higher quality factor is still a challenging issue. Thus, herein, we fabricated a Fabry–Pérot resonator using an active layer of novel C(NH2)3PbI3:Tm thin films with a reflecting layer of cholesteric liquid crystal (CLC), spacer layers of Al2O3 and poly(3-hexylthiophene) (P3HT) and back reflecting layer of Au to improve the lasing performances of hybrid halide perovskites. The incorporation of thulium further improved the optical properties of the C(NH2)3PbI3 perovskite thin films by enhancing the insertion of organic and inorganic molecules. Furthermore, the introduction of a cholesteric liquid crystal layer greatly enhanced the single-mode lasing performances of GAPbI3:Tm with a low threshold of 0.70 μJ cm−2. Interestingly, the Fabry–Pérot resonator of CLC/Al2O3/C(NH2)3PbI3:Tm/P3HT/Au achieved a high quality factor of 2500. This work proves the potential of C(NH2)3PbI3:Tm perovskites in lasing. Therefore, rare earth element-incorporated guanidinium lead iodide can result in a dramatic change in future lasing applications owing to its desirable optical properties.

Graphical abstract: Low threshold lasing from novel thulium-incorporated C(NH2)3PbI3 perovskite thin films in Fabry–Pérot resonator

Supplementary files

Article information

Article type
Paper
Submitted
17 set 2018
Accepted
19 out 2018
First published
22 out 2018

J. Mater. Chem. C, 2018,6, 12537-12546

Low threshold lasing from novel thulium-incorporated C(NH2)3PbI3 perovskite thin films in Fabry–Pérot resonator

G. M. Arumugam, C. Xu, S. K. Karunakaran, Z. Shi, F. Qin, C. Zhu and F. Chen, J. Mater. Chem. C, 2018, 6, 12537 DOI: 10.1039/C8TC04697B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements