Issue 3, 2018

Photoelectrochemical response of carbon dots (CDs) derived from chitosan and their use in electrochemical imaging

Abstract

We report a direct photoelectrochemical response from low cost carbon dots (CDs) prepared from chitosan via a solvothermal method. The carbon dots were covalently linked to an indium tin oxide (ITO) surface through a self-assembled silane monolayer. We attribute the photocurrent of the ITO–silane–CD surface to a photogenerated electron-transfer process by CDs under illumination with a wavelength of 420 nm to 450 nm. The self-assembled monolayer of CDs was used for ac-photocurrent imaging of the surface with micron scale lateral resolution. This discovery opens up new applications for CDs as biocompatible, light-addressable electrochemical sensors in bioanalytical and bioimaging applications.

Graphical abstract: Photoelectrochemical response of carbon dots (CDs) derived from chitosan and their use in electrochemical imaging

Supplementary files

Article information

Article type
Communication
Submitted
23 set 2017
Accepted
14 dez 2017
First published
12 fev 2018
This article is Open Access
Creative Commons BY-NC license

Mater. Horiz., 2018,5, 423-428

Photoelectrochemical response of carbon dots (CDs) derived from chitosan and their use in electrochemical imaging

D. Zhang, N. Papaioannou, N. M. David, H. Luo, H. Gao, L. C. Tanase, T. Degousée, P. Samorì, A. Sapelkin, O. Fenwick, M. Titirici and S. Krause, Mater. Horiz., 2018, 5, 423 DOI: 10.1039/C7MH00784A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements