Issue 22, 2018

Ultra-sensitive microfluidic wearable strain sensor for intraocular pressure monitoring

Abstract

Wearable technologies have potential to transform healthcare by providing continuous measurements of physiological parameters. Sensors that passively monitor physiological pressure without using electronic components are ideal for wearable contact lenses because they are easy to interface with the cornea and the external environment. Here, we report a passive integrated microfluidic sensor with a novel transduction mechanism that converts small strain changes into a large fluidic volume expansion, detectable by a smart-phone camera. The optimization of the sensor architecture and material properties results in a linear and stable sensor response. We have shown that the sensor has a detection limit of <0.06% for uniaxial and <0.004% for biaxial strain. We embedded our sensor in silicone contact lenses and measured the intraocular pressure induced strain in porcine eyes in the physiological range. The sensor's continuous operation capability for >19 hours and a lifetime reaching >7 months demonstrate its potential for long-term ophthalmic monitoring applications.

Graphical abstract: Ultra-sensitive microfluidic wearable strain sensor for intraocular pressure monitoring

Supplementary files

Article information

Article type
Paper
Submitted
23 jul 2018
Accepted
19 set 2018
First published
24 set 2018

Lab Chip, 2018,18, 3471-3483

Ultra-sensitive microfluidic wearable strain sensor for intraocular pressure monitoring

S. Agaoglu, P. Diep, M. Martini, S. KT, M. Baday and I. E. Araci, Lab Chip, 2018, 18, 3471 DOI: 10.1039/C8LC00758F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements