Issue 35, 2017

The influence of polyanion molecular weight on polyelectrolyte multilayers at surfaces: protein adsorption and protein–polysaccharide complexation/stripping on natural polysaccharide films on solid supports

Abstract

Two different fucoidan polymers (unfractionated Fucus vesiculosus fucoidan, and fractionated low molecular weight Fucus vesiculosus fucoidan) have been used to create substrates for protein adsorption studies. Polyelectrolyte multilayers were formed using the fucoidans (polyanions) with chitosan as the corresponding polycation. Multilayer formation was studied using zeta potential measurements, quartz crystal microbalance with dissipation monitoring (QCM-D) and attenuated total reflectance (ATR) FTIR spectroscopy. The formation studies reveal that the low molecular weight (LMW) fucoidan produces a less hydrated multilayer, with a significantly increased adsorbed mass, and with fucoidan as the diffusing species during formation. Protein adsorption studies using bovine serum albumin (BSA) were undertaken for solution conditions designed to mimic biological conditions, and to minimise the role of electrical double layer forces in influencing adsorption. Under these conditions, and as revealed by ATR FTIR spectroscopy, BSA is seen to adsorb less substantially to multilayers formed with the LMW fucoidan, and to cause extraction/stripping of the LMW fucoidan from the multilayer. FTIR spectra reveal that the protein adopts a different conformation when adsorbed to the LMW fucoidan multilayer, both relative to the protein in solution and when adsorbed at the surface of the multilayer formed from unfractionated fucoidan.

Graphical abstract: The influence of polyanion molecular weight on polyelectrolyte multilayers at surfaces: protein adsorption and protein–polysaccharide complexation/stripping on natural polysaccharide films on solid supports

Supplementary files

Article information

Article type
Paper
Submitted
20 abr 2017
Accepted
19 jun 2017
First published
30 jun 2017

Phys. Chem. Chem. Phys., 2017,19, 23790-23801

The influence of polyanion molecular weight on polyelectrolyte multilayers at surfaces: protein adsorption and protein–polysaccharide complexation/stripping on natural polysaccharide films on solid supports

N. L. Benbow, J. L. Webber, S. Karpiniec, M. Krasowska, J. K. Ferri and D. A. Beattie, Phys. Chem. Chem. Phys., 2017, 19, 23790 DOI: 10.1039/C7CP02599H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements