Issue 18, 2013

One-step fabrication of micro/nanotunnels in metal interlayers

Abstract

A micro/nanotunnel is a very useful structure, which has been used as an interconnected pass in various micro/nano systems. Here, a novel micro/nanotunnel fabrication method in a metal interlayer ZnS–SiO2/Sn/ZnS–SiO2 sandwich structure is proposed based on a laser direct writing (LDW) technique. The experimental results show that the arched tunnel is 170 nm in width and 50 nm in height, far beyond the diffraction limit of the LDW system with a 533 nm laser and 0.9 NA objective lens. In only one step, an arbitrary tunnel can be fabricated, exhibiting its simple, designable and practical features, and providing a new route for micro/nanotunnel fabrication.

Graphical abstract: One-step fabrication of micro/nanotunnels in metal interlayers

Article information

Article type
Communication
Submitted
04 abr 2013
Accepted
22 mai 2013
First published
23 mai 2013

Nanoscale, 2013,5, 8351-8354

One-step fabrication of micro/nanotunnels in metal interlayers

J. Zhang, C. Guo, H. Zhang and Q. Liu, Nanoscale, 2013, 5, 8351 DOI: 10.1039/C3NR01677C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements