Issue 48, 2022

Stabilizing the Li1.4Al0.4Ti1.6(PO4)3/Li interface with an in situ constructed multifunctional interlayer for high energy density batteries

Abstract

The sodium super-ionic conductor (NASICON)-type solid-state electrolyte Li1.4Al0.4Ti1.6(PO4)3 (LATP) is an attractive alternative to liquid electrolytes for lithium batteries. The rapid development of LATP, however, is hindered by its poor interfacial compatibilities against the Li metal. Herein, a flexible membrane coating layer consisting of Mg3N2 and PVDF has been adopted to modify LATP via a simple drop-casting method. A multifunctional interlayer with Mg, LiF and Li3N is in situ constructed by the reaction of the coating layer with the Li metal. The decomposition of LATP has been restrained and interfacial ionic transport kinetics has been improved with the modification. Benefitting from the multifunctional interlayer, the critical current density of LATP is improved from 0.34 mA cmāˆ’2 to 0.76 mA cmāˆ’2. The symmetric cells assembled with the modified LATP exhibit a stable cycle for more than 1000 h at 0.20 mA cmāˆ’2, and the Li/LiFePO4 cells after modification have a capacity retention of 80% after 385 cycles at 2C. The present work demonstrates a promising strategy for fine interfacial stability tuning and low-impedance LATP.

Graphical abstract: Stabilizing the Li1.4Al0.4Ti1.6(PO4)3/Li interface with an in situ constructed multifunctional interlayer for high energy density batteries

Associated articles

Supplementary files

Article information

Article type
Paper
Submitted
05 out 2022
Accepted
13 nov 2022
First published
15 nov 2022

J. Mater. Chem. A, 2022,10, 25500-25508

Stabilizing the Li1.4Al0.4Ti1.6(PO4)3/Li interface with an in situ constructed multifunctional interlayer for high energy density batteries

C. Huang, S. Huang, A. Wang, Z. Liu, D. Pei, J. Hong, S. Hou, L. Vitos and H. Jin, J. Mater. Chem. A, 2022, 10, 25500 DOI: 10.1039/D2TA07783C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements