Issue 10, 2017

Facilitated embedding of silver nanowires into conformally-coated iCVD polymer films deposited on cloth for robust wearable electronics

Abstract

We propose that a silver nanowire (AgNW)-embedded conducting film can be monolithically applied onto an arbitrary cloth with strong adhesion and environmental stability. We employ a vapor-phase method, initiated chemical vapor deposition (iCVD), for conformal coating of a scaffold polymer film on the cloth. AgNWs are applied on the surface of iCVD polymer films, and the embedding of AgNWs is completed within only 20 s on heating the polymer-coated cloth to 70 °C. Crosslinking the copolymer at 120 °C renders the AgNW-embedded conducting films on the cloth not only thermally and chemically stable, but also mechanically robust. Moreover, when a hydrophobic encapsulating polymer layer is added on the AgNW-embedded film via iCVD, it substantially improves the stability of the cloth against thermal oxidation under hot and humid conditions, showing applicability of the technology to wearable electronics. With these robust conducting films, we demonstrate the fabrication of a waterproof cloth-based heater and circuit for a seven-segment display, thus, confirming the wide applicability of the technology developed in this study.

Graphical abstract: Facilitated embedding of silver nanowires into conformally-coated iCVD polymer films deposited on cloth for robust wearable electronics

Supplementary files

Article information

Article type
Paper
Submitted
18 out 2016
Accepted
09 dez 2016
First published
09 dez 2016

Nanoscale, 2017,9, 3399-3407

Facilitated embedding of silver nanowires into conformally-coated iCVD polymer films deposited on cloth for robust wearable electronics

J. Seo, M. Joo, J. Ahn, T. Lee, T. Kim, S. G. Im and J. Lee, Nanoscale, 2017, 9, 3399 DOI: 10.1039/C6NR08168A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements