Issue 10, 2016

A non-fullerene electron acceptor modified by thiophene-2-carbonitrile for solution-processed organic solar cells

Abstract

Effective electron acceptor materials usually have a deep lowest unoccupied molecular orbital (LUMO) energy level that can split excitons and generate current. A non-fullerene electron acceptor (F8-DPPTCN) was developed, using fluorene as the core with arms of diketopyrrolopyrrole (DPP) having thiophene-2-carbonitrile as the terminal units. The new molecule had a LUMO of −3.65 eV and a narrow bandgap (Eg) of 1.66 eV, owing to the electronegativity of the thiophene-2-carbonitrile group and its conjugation with DPP units. Organic solar cells (OSCs) with F8-DPPTCN as the acceptor and poly(3-hexylthiophene) (P3HT) as the donor were fabricated. A power conversion efficiency (PCE) of 2.37% was obtained with an open-circuit voltage (Voc) of 0.97 V, a short-circuit current (Jsc) of 6.25 mA cm−2, and a fill factor (FF) of 0.39. Structural characterization showed that P3HT and F8-DPPTCN were kinetically trapped in a weakly separated state whereas thermal annealing led to the crystallization of P3HT and the formation of a network structure with a mesh-size of several hundred nanometers. When a solvent additive, diiodooctane, was used and the mixture was thermally annealed, both P3HT and F8-DPPTCN crystallized and a multi-length scale network was formed. Though the PCEs were low, the changes in the PCE could be correlated with the morphological changes, opening pathways to increase performance further.

Graphical abstract: A non-fullerene electron acceptor modified by thiophene-2-carbonitrile for solution-processed organic solar cells

Supplementary files

Article information

Article type
Paper
Submitted
04 jan 2016
Accepted
03 fev 2016
First published
04 fev 2016

J. Mater. Chem. A, 2016,4, 3777-3783

A non-fullerene electron acceptor modified by thiophene-2-carbonitrile for solution-processed organic solar cells

S. Li, J. Yan, C. Li, F. Liu, M. Shi, H. Chen and T. P. Russell, J. Mater. Chem. A, 2016, 4, 3777 DOI: 10.1039/C6TA00056H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements