Issue 5, 2016

Synergistic improvements in stability and performance of lead iodide perovskite solar cells incorporating salt additives

Abstract

The main issues in planar perovskite solar cells are the coverage and crystallinity of the perovskite film on the PEDOT:PSS layer. To enhance these features, we introduced alkali metal halides (salts) as additives into the perovskite precursor solution used in a two-step preparation method. These alkali metal halides chelate with Pb2+ ions and enhance the crystal growth of PbI2 films, resulting in nanostructured morphologies. The nanostructured PbI2 films promote homogeneous nucleation and larger crystallite sizes, thereby enhancing the morphology and crystallinity of the perovskite films. The alkali metal halides recrystallize the small grains and passivate the grain boundaries and interface states, allowing effective charge generation and dissociation in perovskite films. Photoluminescence measurements indicated that perovskite films prepared with salt additives featured fewer charge traps and defects. The power conversion efficiency of the device incorporating a small amount of a salt additive increased by approximately 33%—from 11.4 to 15.08%. This device was more stable than a corresponding device prepared without the additive, with only 16.5% degradation occurring over a period of 50 days.

Graphical abstract: Synergistic improvements in stability and performance of lead iodide perovskite solar cells incorporating salt additives

Supplementary files

Article information

Article type
Communication
Submitted
16 dez 2015
Accepted
07 jan 2016
First published
07 jan 2016

J. Mater. Chem. A, 2016,4, 1591-1597

Synergistic improvements in stability and performance of lead iodide perovskite solar cells incorporating salt additives

K. M. Boopathi, R. Mohan, T. Huang, W. Budiawan, M. Lin, C. Lee, K. Ho and C. Chu, J. Mater. Chem. A, 2016, 4, 1591 DOI: 10.1039/C5TA10288J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements