Issue 7, 2024

Exploring pristine and transition metal doped SiP2 monolayer as a promising anode material for metal (Li, Na, Mg) ion battery

Abstract

Following the successful synthesis of SiP2 monolayers, the two-dimensional (2D) SiP2 monolayer could potentially be used in various fields including photocatalyst water splitting, phototransistor, and thermoelectric applications. However, 2D SiP2 has not been explored as an electrode in the field of rechargeable batteries. In this study, we investigate the structural and electronic properties of 2D SiP2 monolayers. This study also covers the analysis of doping effects on pristine SiP2 where we substitute the phosphorus atom with a transition metal (Cr, Mn, Co, Ni). Further, we show its potential application as an anode material for lithium, sodium, and magnesium ion batteries. We analyze the adsorption and diffusion behavior of the alkali metal atoms. The magnesium ion shows a maximum adsorption energy of −3.2 eV, followed by −2.42 eV and −2.22 eV for the Li and Na ions respectively. The calculated minimum diffusion barrier for Li and Na is 0.9 eV and 0.28 eV, while the Mg ion shows an ultra-low diffusion barrier of 0.06 eV which is the signature of the SiP2 monolayer. The predicted open circuit voltage falls between 0.6 to 0.9 volts for all the metal atoms. The specific capacity shown by the SiP2 monolayers towards Li, Na and Mg are 209 mA h g−1, 188 mA h g−1 and 373 mA h g−1, respectively.

Graphical abstract: Exploring pristine and transition metal doped SiP2 monolayer as a promising anode material for metal (Li, Na, Mg) ion battery

Supplementary files

Article information

Article type
Paper
Submitted
02 dez 2023
Accepted
30 jan 2024
First published
31 jan 2024
This article is Open Access
Creative Commons BY-NC license

Mater. Adv., 2024,5, 2797-2804

Exploring pristine and transition metal doped SiP2 monolayer as a promising anode material for metal (Li, Na, Mg) ion battery

S. Sahoo, P. Kumari and S. J. Ray, Mater. Adv., 2024, 5, 2797 DOI: 10.1039/D3MA01079A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements