Issue 45, 2020

Effects of polymer crystallinity on non-fullerene acceptor based organic solar cell photostability

Abstract

While there has been rapid progress made in the performance of organic photovoltaic (OPV) cells in recent years, the device stability remains a major bottleneck for commercialization. In this work, we blended a stable acceptor (O-IDTBR) with two photostable donors (PTB7-Th and PffBT4T-2OD) having different polymer crystallinity, and the resulting devices show a significant difference in the OPV degradation rate. The OPV devices employing a highly crystalline polymer PffBT4T-2OD as an active layer show a good resistance against light soaking, maintaining 80% of the initial power conversion efficiency (PCE) up to 100 hours, while the devices employing an amorphous polymer PTB7-Th as an active layer show a significant PCE loss in the initial 20 hours mainly due to a rapid loss of the fill factor. By carrying out a comprehensive analysis of the device degradation mechanisms, we conclude that the origin for the PTB7-Th:O-IDTBR device degradation is the formation of mid-gap states under continuous sunlight illumination, leading to a significant drop in electron mobility. Device simulation revealed that deep traps act as charge recombination centers and increase the trap-assisted recombination rate, lowering the FF and Jsc.

Graphical abstract: Effects of polymer crystallinity on non-fullerene acceptor based organic solar cell photostability

Supplementary files

Article information

Article type
Paper
Submitted
20 ago 2020
Accepted
13 out 2020
First published
13 out 2020

J. Mater. Chem. C, 2020,8, 16092-16099

Author version available

Effects of polymer crystallinity on non-fullerene acceptor based organic solar cell photostability

X. Yi, C. H. Y. Ho, B. Gautam, L. Lei, A. H. Chowdhury, B. Bahrami, Q. Qiao and F. So, J. Mater. Chem. C, 2020, 8, 16092 DOI: 10.1039/D0TC03969A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements