Issue 47, 2020

Scalable fabrication of flexible piezoresistive pressure sensors based on occluded microstructures for subtle pressure and force waveform detection

Abstract

Scalable, economical, simple, time-saving, and eco-friendly fabrication of flexible pressure sensors is a big thrust for developing flexible sensors/electronics, while it is a current challenge to fabricate subtle pressure-sensitive sensors in such a way. Here, we report an occluded flexible piezoresistive pressure sensor with the foregoing features using a conventional polymer processing method. Poly(dimethyl siloxane)/carbon nanostructure (PDMS/CNS) composite film pressure sensors with tailorable microstructures were prepared using commercially available metal sieve templates with a transfer printing method. Acquiring an appropriate occluded configuration with face-to-face microstructures, the derived sensor displays high pressure sensitivity (1.214 kPa−1) under subtle pressure (<100 Pa), an ultralow detection limit (1.75 Pa), a rapid response, a super-low working voltage (0.1 V), and excellent sensing stability for more than 1700 cycles. The pressure sensor with programmable size, shape and sensitivity is capable of discriminating varied forms and frequencies of input pressure signals with instant and precise response, enabling potential application in flexible electronics.

Graphical abstract: Scalable fabrication of flexible piezoresistive pressure sensors based on occluded microstructures for subtle pressure and force waveform detection

Supplementary files

Article information

Article type
Paper
Submitted
20 ago 2020
Accepted
22 out 2020
First published
22 out 2020

J. Mater. Chem. C, 2020,8, 16774-16783

Scalable fabrication of flexible piezoresistive pressure sensors based on occluded microstructures for subtle pressure and force waveform detection

W. Li, J. Pu, X. Zhao, J. Jia, K. Ke, R. Bao, Z. Liu, M. Yang and W. Yang, J. Mater. Chem. C, 2020, 8, 16774 DOI: 10.1039/D0TC03961F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements