Issue 48, 2020

Boosting potassium-storage performance via the functional design of a heterostructured Bi2S3@RGO composite

Abstract

Potassium-ion batteries (PIBs) are considered a promising alternative to lithium-ion batteries (LIBs) for next-generation energy storage due to the abundance and competitive cost of potassium resources. However, the excavation and the development of proper electrodes for PIBs are still confronted with great challenges. Herein, a self-assembled bismuth sulfide microsphere wrapped with reduced graphene oxide was fabricated to form a heterostructured Bi2S3@RGO composite via a visible-light-assisted method and served as the anode for PIBs. The as-prepared Bi2S3@RGO composite presented a high reversible specific capacity of 538 mA h g−1 at 0.2 A g−1 and superior rate capability of 237 mA h g−1 at a high current density of 2 A g−1 after 300 cycles. In particular, the high capacity could be ascribed to the synergistic effect of the conversion and alloying reactions during the electrochemical processes, which was validated by ex situ X-ray diffraction. The fabrication of a unique heterostructure combining the self-assembled Bi2S3 microspheres and flexible RGO boosted the facile charge transfer, leading to the enhanced cyclic stability and rate performance.

Graphical abstract: Boosting potassium-storage performance via the functional design of a heterostructured Bi2S3@RGO composite

Supplementary files

Article information

Article type
Paper
Submitted
07 set 2020
Accepted
21 nov 2020
First published
23 nov 2020

Nanoscale, 2020,12, 24394-24402

Boosting potassium-storage performance via the functional design of a heterostructured Bi2S3@RGO composite

Y. Liu, M. Li, Y. Zheng, H. Lin, Z. Wang, W. Xin, C. Wang and F. Du, Nanoscale, 2020, 12, 24394 DOI: 10.1039/D0NR06457B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements