Issue 25, 2015

UV crosslinked poly(acrylic acid): a simple method to bio-functionalize electrolyte-gated OFET biosensors

Abstract

A simple and time-saving wet method to endow the surface of organic semiconductor films with carboxyl functional groups is presented. A thin layer of poly(acrylic acid) (pAA) is spin-coated directly on the electronic channel of an electrolyte-gated organic FET (EGOFET) device and cross-linked by UV exposure without the need for any photo-initiator. The carboxyl functionalities are used to anchor phospholipid bilayers through the reaction with the amino-groups of phosphatidyl-ethanolamine (PE). By loading the membranes with phospholipids carrying specific functionalities, such a platform can be easily implemented with recognition elements. Here the case of biotinylated phospholipids that allow selective streptavidin electronic detection is described. The surface morphology and chemical composition are monitored using SEM and XPS, respectively, during the whole process of bio-functionalization. The electronic and sensing performance level of the EGOFET biosensing platform is also evaluated. Selective analyte (streptavidin) detection in the low pM range is achieved, this being orders of magnitude lower than the performance level obtained by the well assessed surface plasmon resonance assay reaching the nM level, at most.

Graphical abstract: UV crosslinked poly(acrylic acid): a simple method to bio-functionalize electrolyte-gated OFET biosensors

Supplementary files

Article information

Article type
Paper
Submitted
03 fev 2015
Accepted
27 mar 2015
First published
27 mar 2015

J. Mater. Chem. B, 2015,3, 5049-5057

UV crosslinked poly(acrylic acid): a simple method to bio-functionalize electrolyte-gated OFET biosensors

M. Y. Mulla, P. Seshadri, L. Torsi, K. Manoli, A. Mallardi, N. Ditaranto, M. V. Santacroce, C. Di Franco, G. Scamarcio and M. Magliulo, J. Mater. Chem. B, 2015, 3, 5049 DOI: 10.1039/C5TB00243E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements