Issue 18, 2015

A novel approach to fabricate zeolite membranes for pervaporation processes

Abstract

The conventional methods used in preparing zeolite membranes, such as the secondary growth and in situ crystallization methods, involve long and complex procedures that require the preparation of the zeolite aluminosilicate gel prior to the fabrication process and often result in membranes which contain pin holes. Here we report a simple, cheap, and less time-consuming technique to fabricate zeolite A and mordenite membranes on a porous stainless steel support. In addition, the technique makes it possible to fabricate types of zeolite membranes that have been previously difficult to synthesise. A clinoptilolite membrane was fabricated to demonstrate the ability to manufacture a zeolite membrane from an existing crystalline zeolite (natural or synthetic). All three membranes were subjected to separation tests, (ethanol dehydration, ethanol–cyclohexane and phenol removal from water) to demonstrate the efficacy of membrane synthesis. The fluxes obtained and separation factors which were achieved are comparable with literature values but as with most zeolite membranes there is a trade-off between high flux and separation.

Graphical abstract: A novel approach to fabricate zeolite membranes for pervaporation processes

Article information

Article type
Paper
Submitted
07 jan 2015
Accepted
20 mar 2015
First published
20 mar 2015

J. Mater. Chem. A, 2015,3, 9799-9806

A novel approach to fabricate zeolite membranes for pervaporation processes

A. A. Alomair, S. M. Al-Jubouri and S. M. Holmes, J. Mater. Chem. A, 2015, 3, 9799 DOI: 10.1039/C5TA00124B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements