Maurizio
Mastropasqua Talamo
*a,
Thomas
Cauchy
a,
Flavia
Pop
*a,
Francesco
Zinna
b,
Lorenzo
Di Bari
b and
Narcis
Avarvari
*a
aUniv Angers, CNRS, MOLTECH-Anjou, SFR MATRIX, F-49000 Angers, France. E-mail: maurizio.mastropasquatalamo@univ-angers.fr; flavia.pop@univ-angers.fr; narcis.avarvari@univ-angers.fr
bDipartimento di Chimica e Chimica Industriale, Università di Pisa, via G. Moruzzi 13, 56124, Pisa, Italy
First published on 28th March 2023
Due to their excellent emissive properties in solution, diketopyrrolo[3,4-c]pyrrole (DPP) derivatives are expected to show interesting features in emission in the solid state by suppressing aggregation-caused quenching. In this work, aggregation-enhanced emission (AEE) and circularly polarised light (CPL) emission in the aggregated state have been studied on achiral and chiral DPPs appended with tetraarylethylene units. Both thiophene and phenyl DPPs (2 and 5) show classical aggregation-caused quenching (ACQ) of the emission behaviour in the solid state, whereas the presence of triphenylethylene units (3 and 6) does not completely quench the emission in the solution state. Nevertheless, enhancement of the emission from the solution to solid state films from 25 to 36% is observed with phenyl DPP (3), whereas the less distorted thiophene analogue 6 still shows a classical ACQ behaviour. When the photoluminescence behaviour in the aggregated states was studied in a series of THF/water mixtures, phenyl DPP 3 showed a 2-fold enhancement in fluorescence intensity when the water fraction was increased from 0% up to 70%, accompanied by an increase in the quantum yield from 17% up to 28%, and the achiral compound 8 showed a 3.5-fold enhancement in the fluorescence intensity when the water fraction was increased from 0% to 50%, accompanied by an increase in the quantum yield from 20% up to 58%. Alkylation of DPPs by the Mitsunobu reaction with N-sec-phenethyl groups has the advantage of enhancing the chiroptical properties in solution due to the proximity of the stereogenic motif. Thus, compound 3, dissolved at a concentration of 10−6 M in CHCl3, emitted detectable CPL under excitation at 365 nm, with |glum| around 2 × 10−4, with positive values for the SS enantiomer and negative values for the RR enantiomer. In this work, we show the importance of the position of the stereogenic motif within the chiral unit and the steric demand of the tetraarylethylene motifs needed to induce light emission in the solid state and CPL emission of chiroptical materials based on DPPs.
Enantiopure chiral chromophores undergo differential interaction with the two modes of circular polarization of light, namely the left and right Circularly Polarized (CP) light. The differential absorption of these two components results in electronic circular dichroism (ECD), and its measurement constitutes one of the main analytical techniques for the characterization of chiral compounds. ECD spectroscopy can indeed deliver precious information about the configurational and conformational composition of a sample and its supramolecular organization.16–18 In the case of radiative relaxation in an excited state, left and right polarizations are emitted differently, which amounts to circularly polarized luminescence or CPL. CPL can be quantified by the dissymmetry factor defined as glum = 2(IL − IR)/(IL + IR), where IL and IR are the intensities of the left- and right-handed circularly polarised emitted lights, respectively.19,20 Moreover, another expedient metrics is CPL brightness (BCPL), which beside glum takes into account the extinction coefficient (ε) and the quantum yield (φ), as BCPL = ε·φ·|glum|/2.21
Chiral lanthanide complexes have been long studied as CP light emitters, displaying large |glum| values, sometimes exceeding unity.22,23 However, light emission from lanthanide complexes may suffer from modest quantum yields and is severely limited by the absence of any tunability. In order to facilitate the development of CPL-based applications, chiral systems containing organic fluorophores displaying high fluorescence quantum yields and tuneable photophysical properties are currently gaining increasing interest as CP light emitters. Most of the explored CPL emitting organic molecular systems rely on achiral chromophores, chirally perturbed by the introduction of stereogenic motifs such as elements of point, axial, helical or planar chirality.24–28
1,4-Diketo-3,6-diarylpyrrolo[3,4-c]pyrrole (DPP) derivatives are a class of dyes based on a rigid bilactam core conjugated with two aromatic side groups, known for their intense optical absorption and high fluorescence quantum yields. By varying the nature of the flanking aryl groups, it is possible to tune the HOMO–LUMO gap from the green to the near-infrared (NIR) domain.24,29,30 On the other hand, the substituents on the nitrogen position only slightly affect the optical features of isolated DPP dyes but have a huge impact on the intermolecular interactions, the packing modes and hence the photophysical properties in the solid state.6,31 Due to their rigid structures and the extended π-conjugation, the DPP derivatives display aggregation modes often dominated by π-stacking interactions, which eventually lead to the phenomenon known as Aggregation-Caused Quenching (ACQ) consisting of a dramatic reduction of the fluorescence yield upon aggregation. However, sterically demanding groups can reduce the extent of π-stacking interactions, preserving decent emissive properties in the solid state.6,32
Owing to their advantageous photophysical properties, DPP dyes have been studied in few cases as molecular systems for CP light emission: DPP dyes chirally perturbed by enantiopure binaphthyl side groups reached |glum| values of 6 × 10−4,25 while chiral dyads of DPP units bridged through an enantiopure helicene displayed red CP light emission with a |glum| of 9 × 10−4 through a mechanism of intramolecular chiral exciton coupling.24N-Alkylation with chiral alkyl chains has been very recently explored as a synthetic tool for endowing DPP with chiroptical properties either as supramolecular aggregates, whose formation was triggered by hydrogen bonding,7 or as thin films which were mapped by Mueller Matrix Polarimetry.16 Moreover, N-dihydrocitronellyl chains have been used in a series of DPP-thiophenes to trigger ECD activity in the solution aggregates. The thiophene rings were functionalized with phenyl, 4-(diphenylamino)phenyl or tetraphenylethylene (TPE) substituents; the former two gave intense ECD spectra of the aggregates in solution, whereas TPE yielded no measurable optical activity.17 Due to the distance between the stereogenic carbon and the DPP core, isolated molecules remained CD silent in solution in all the derivatives.17
In general, all the studies on chiral DPP dyes refer to emissive properties in solution, as for those derivatives, ACQ appeared to be dominant in the solid phases. In some cases, the ACQ phenomenon can be prevented by using molecular motifs displaying the property of aggregation-induced emission (AIE) that is the opposite phenomenon to ACQ. AIE is generally explained as an increased rate of radiative relaxation upon molecular aggregation, due to the blocking of intramolecular motion that would otherwise result in fluorescence quenching. Tetraarylethylenes, siloles, and cyanostilbenes are some of the most well-known motifs displaying AIE properties and they, especially TPE, are also some of the most accessible forms from a synthetic point of view.33 Thanks to the practical access to 1,2,2-(triphenyl)ethylene boronic derivative, it is possible to generate various tetraarylethylene functions on other chromophoric scaffolds by Suzuki coupling, provided the presence of reactive aryl halide sites on the substrate. Following this strategy, TPE-DPP derivatives have been synthesized and studied by Tang and coworkers (Fig. 1).34 However, although containing TPE moieties, most of the N-octyl alkylated DPPs reported in this work displayed ACQ behaviour. A partial AIE phenomenon was only observed upon further modification of the molecules by adding phenyl spacers between DPP cores and TPE functions, and by the introduction of electron-donating amino groups on the TPE portion of the molecule, which seemed to promote ordered aggregation.34
Fig. 1 Structures of the TPE-DPP derivatives studied in this work and analogous derivatives previously reported. |
Besides the enhanced emissive properties of TPE derivatives in the aggregated state, the use of this structural motif in molecular materials with chiroptical properties is also motivated by the fact that TPE does not remain flat but rather adopts a propeller-shaped conformation, and therefore, upon restriction of molecular motion, the structure can be blocked in one of the two possible enantiomeric conformations characterized by enhanced chiroptical responses.35–37
In this work, we aimed at obtaining chiral DPP-based materials with enhanced emissive and chiroptical properties in the solid state. To achieve such a goal, we took advantage of TPE functions applied to a new class of chiral DPP derivatives possessing stereogenic carbons directly connected at the N-position (Fig. 1).
For comparison purposes, the achiral analogue of 3, namely the bis(N-benzyl)-bisTPE-DPP derivative 8, has been prepared starting from bis(p-bromophenyl)DPP (1) upon N-benzylation under classical conditions to afford bis(N-benzyl)-bis(p-bromophenyl)-DPP 7,39 followed by the Suzuki–Miyaura coupling of the latter with TPE-Bpin (Scheme 2 and Fig. S7, S8, ESI†).
Gratifyingly, single crystals of 3RR and 8 of suitable size for X-ray diffraction were obtained from liquid–liquid diffusion of methanol into ca. 10−3 M solution in chloroform.
The solid-state structure of 3RR was unambiguously determined by single crystal X-ray diffraction analysis. The compound crystallizes within the non-centrosymmetric space group P1, with one independent molecule per asymmetric unit (Tables S1–S3, ESI†). In each molecule, the two TPE moieties adopt complementary conformations which can be defined as P and M (Fig. 2 and Fig. S9, ESI†).37 However owing to a network of intramolecular and intermolecular CH–π interactions between asymmetric sec-phenethyl groups and TPE moieties, the two TPE moieties are not perfect mirror images to each other.
In the packing, the DPP cores are well isolated by the bulky TPE and sec-phenethyl (1-PE) groups (average distance of 9.622 Å between the closest bilactam units), with the occurrence of CH–π intra- and intermolecular interactions (Fig. 3 and Fig. S10, ESI†). Intramolecular TPE-CH to 1-PE π interactions are characterized by distances of 3.066 Å. Intermolecular TPE-CH to 1-PE π interactions have distances of 2.946 Å, while intermolecular 1-PE CH to TPE–π interactions display distances of 2.898 Å.
The torsional angles between the central DPP core and the first phenyl rings (a^α and a′^α′) of the TPE moiety, amounting at ca. 40°, have a difference of ca. 2° between each side of the molecule, and even smaller differences, of about half degree between the two halves, are measured for the angles between the first phenyl rings of TPE and the plane containing the ethylene system (α^ε and α′^ε′) (Fig. 4). Bigger differences are detected for the torsional angles between the ethylene system and the remaining phenyl rings of the TPE moiety (|β^ε − β′^ε′| = 3.149°, |γ^ε − γ′^ε′| = 4.390°, |δ^ε − δ′^ε′| = 3.015°).
On the other hand, compound 8 crystallizes within the centrosymmetric space group P, with the half molecule within the asymmetric unit. Therefore, the two TPE units adopt perfect complementary M and P conformation within each molecule. Similar to 3RR, the TPE moieties help keep the DPP isolated, as suggested by the average distance of 9.575 Å between the closest bilactam units (Fig. S11, S12, Tables S1 and S4, S5, ESI†).
Compound 5 in 10−5 M solutions in chloroform displays an absorption band peaking at 525 nm (ε = 15700 L mol−1 cm−1) that appears slightly structured as in other thienyl-DPP derivatives, but not resolved. Replacing the solvent by a chloroform/methanol (1:9) mixture determines a blue shift of 6 nm and a slight hypochromism with a decrease of ε to 14000 L mol−1 cm−1 (Fig. 5a). The ECD spectroscopy shows a signal of ca. +3.7 L mol−1 cm−1 for the (S,S) enantiomer (5SS) at the maximum of the main transition, with a perfect mirror image for the (R,R) enantiomer (5RR) that does not evolve in the chloroform/methanol (1:9) mixture (Fig. 6c). Similarly, the enantiomers of compound 6 show an absorption band peaking at 548 nm (ε = 29500 L mol−1 cm−1) in chloroform and 538 nm in the chloroform/methanol (1:9) mixture with a slight hypochromism (ε = 28700 L mol−1 cm−1) (Fig. 5a). This transition is ECD active as well, with a signal amplitude of +7.6 L mol−1 cm−1 for the (S,S) enantiomer (6SS) and a mirror image pattern for the (R,R) enantiomer (6RR). The absolute value of the ECD intensity decreases to +6.4 L mol−1 cm−1 in the chloroform/methanol (1:9) mixture (Fig. 6d).
In the film, the absorption spectra of compounds 2 and 3 broaden and the main peaks are 18 nm and 9 nm red-shifted, respectively. Films of 5 and 6 display a broadened absorption, with 37 nm and 16 nm red shift, respectively, compared to chloroform solutions. The compound 5 exhibits a remarkable red-shift in the solid phase compared to solution. This can be explained as an increased contribution of the low energy shoulder (Fig. 5b), which can be attributed to an increased contribution from J aggregates.40
Compound 2 in 3 × 10−5 M chloroform solutions, under excitation at 468 nm, shows emission peaking at 548 nm, with a shoulder at 562 nm, with a quantum yield of 82% (Fig. 7a). Compound 3 in 4 × 10−5 M chloroform solutions emits light at 564 nm, with a shoulder at 606 nm, with a quantum yield of 25% (Fig. 7a). Compound 5 in 6 × 10−5 M chloroform solution emits light with a vibronic progression peaking at 582 nm, 628 nm and 692 nm, with a quantum yield of 63% (Fig. 7a). Compound 6 in 3 × 10−5 M chloroform solution emits light at 622 nm, with a shoulder at 672 nm, with a quantum yield of 55% (Fig. 7a).
In solid samples: compound 2 emits within an unresolved band peaking at 547 nm with a quantum yield of 13%. Compound 3 shows an emission band peaking at 579 nm, with a shoulder at ca. 621 nm and a quantum yield of 36%. Compound 5 emits very weak photoluminescence, whose profile is not shown in Fig. 7b as it is dominated by noise, corresponding to a quantum yield not exceeding 4%. Compound 6 emits an almost resolved vibronic progression starting at 637 nm, with a second peak at 689 nm, and a quantum yield of 17%. Finally, compound 8 emits fluorescence at 594 nm, with a shoulder at 621 nm, and a quantum yield of 27%.
In summary, compounds 2 and 5 are affected by ACQ as expected, even if residual fluorescence is still detectable from compound 2 in the solid state. Conversely, compounds 3 and 6 are not completely quenched in solution, thus they cannot be considered as AIE-gens. However, compound 3 displays an enhanced fluorescence in the solid compared to the solution, therefore it is possible to claim an aggregation-enhanced emission (AEE) for this compound. Indeed, the difference between AIE and AEE phenomena lies in the fact that in the former case, the fluorophore is (almost) totally quenched in solution, while in the latter case, the fluorescence quenching is only partial. On the other hand, compound 6 displays a classic ACQ behaviour despite the presence of a tetraarylethylene system. This can be ascribed to the lower steric demand of thiophene rings, compared to phenyls, which can accommodate into a more planar structure prone to π-stacking interactions.
All the compounds display detectable ECD signals all over the UV-vis absorption region, indicating that introduction of chiral N-substituents provides significant perturbation to the extended chromophores. However, in any case, the signals do not seem to evolve upon aggregation. Under the hypothesis that in the solid state, compounds adopt fewer and more precise preferential conformations, thus enhancing ECD features, measurements on dropcast films, and the powders were dispersed into KBr pellets. Unfortunately, all the measurements were not conclusive as these were heavily affected by artefacts.
The simulated absorption spectrum of the achiral compound 8 shows four relevant absorption bands, the first at 521 nm (π–π* mainly located on the DPP core), the second at 410 nm (π–π* mainly located on the DPP core with the ethylene moieties of TPE), the third at 346 nm (π–π* extended on the whole conjugated system), and the fourth at 320 nm (π–π* mainly located on the TPE moieties), as shown in Fig. S40 (ESI†). Compared to the experimental spectrum (Fig. S42 (ESI†), black line), the lowest energy simulated transition appears overestimated by around 23 nm, while the transitions at 410 nm and 346 nm can be associated to the large bump around 374 nm in the experimental spectrum.
The simulated spectrum of compound 2 shows two relevant absorption bands, the first at 462 nm (π–π*) and the second at 310 nm (n–π*), shown in Fig. S19a and S27a (ESI†), in good agreement with the experiment. The rotational strengths that are calculated as +1.9 × 10−40 esu2 cm2 at 462 nm and −80.7 × 10−40 esu2 cm2 at 310 nm for the RR enantiomer are not accurately reproduced in the ECD spectra, suggesting the presence of many conformations contributing to the experimental spectra.
On the other hand, the simulated spectra of RR and SS enantiomers of compound 3 show four relevant absorption bands, the first at 502 nm (π–π*, Fig. 8a), the second at 402 nm (π–π* with larger involvement of the TPE moieties, Fig. 8b), the third including two lines at 345 nm and 343 nm (with n–π* character partially involving the oxygen non-bonding electron pairs and the N-sec-phenethyl group, Fig. 8c and d), and the fourth at 321 nm (mainly located on the TPE moiety, Fig. 8e). Compared to the experimental spectrum, the lowest energy transition appears overestimated by around 16 nm, while the cluster of transitions between 402 nm and 343 nm can be associated to a large bump at around 374 nm in the experimental spectrum. The rotational strengths are calculated as −16.4 × 10−40 esu2 cm2 at 502 nm, −11.7 × 10−40 esu2 cm2 at 402 nm, −4.5 × 10−40 esu2 cm2 at 345 nm, −8.4 × 10−40 esu2 cm2 at 343 nm and 6.5 × 10−40 esu2 cm2 at 321 nm for the RR enantiomer that are consistent with the fact that the sign of experimental ECD bands remains negative over a wide wavelength range.
Compound 3 dissolved at a concentration of 10−6 M in CHCl3 emitted detectable CPL under excitation at 365 nm, with |glum| around 2 × 10−4, with positive values for the SS enantiomer, and negative for RR (Fig. S43, ESI†). The sign and magnitude of glum are coherent with the absorption dissymmetry factor associated to the most red shifted Cotton effect in the ECD spectrum. The BCPL value was estimated to be approximately 0.6 M−1 cm−1.21
To this point, it is important to highlight the role of benzyl-type N-substituents, thanks to their steric demand in preventing π–π stacking interactions and ACQ. Indeed, while previously reported analogous TPE-DPP derivatives N-alkylated with linear alkyl chains displayed fluorescence quantum yields of 11% in the solid state, compound 8 and 3 (N-alkylated with increasing sterically demanding benzyl and sec-phenethyl groups, respectively) reached quantum yield values of 27% and 36%, respectively.
These results suggest an interesting direction towards the development of DPP-based fluorophores with enhanced emission in the aggregated states, capable of emitting circularly polarized light with the possibility of increasing glum factors upon control of the aggregation mode. The combination of chiroptical activity with the aggregation-induced phenomena is indeed expected to attract great interest in the development of new fluorescent probes for imaging47–49 that would thus be amenable to be stimulated and/or read under circularly polarised light with the potential enhancement of the signal-to-noise ratio.
The spectroscopic properties of the derivatives 2, 3, 5 and 6 were evaluated in solutions at concentrations of 5 × 10−5 M for absorption measurements on a Shimadzu UV-1800 spectrometer, and at adjusted concentrations corresponding to an absorbance of 0.1 for fluorescence measurements on an RF-6000 fluorimeter. The absorption spectroscopy and circular dichroism spectroscopy of 2, 3, 5 and 6 as isolated molecules were recorded in chloroform solutions on a JASCO J-1500 spectrometer at 20 °C, while in order to assess the effect of aggregation, a mixture of chloroform/methanol (1:9) was used as a solvent, by keeping the solute concentration at 5 × 10−5 M.
Spectrophotometry and fluorimetry in the solid state were recorded on films of 2, 3, 5 and 6 drop-casted from 10−4 solutions in CHCl3 onto glass slides. Fluorescence quantum yields were measured on a JASCO FP-8500 fluorimeter equipped with an integrating sphere, in 5 × 10−5 chloroform solutions and in solid powder spread between glass slides, with absorptance between 0.05 and 0.15 (average on 4 measures). CPL spectra of 3RR/3SS were recorded in 10−6 M CHCl3 solution with a home-built instrument under 365 nm irradiation by using a 90° geometry between excitation and detection.50
Similarly, 3RR was obtained from 2RR following the same procedure.
1H NMR (300 MHz, CDCl3) δ = 7.33–7.19 (m, 16H), 7.15–6.99 (m, 32H), 5.29 (q, J = 6.9 Hz, 2H), 1.77 (d, J = 7.1 Hz, 6H) ppm.
13C NMR (76 MHz, CDCl3) δ = 163.01, 149.06, 146.80, 143.58, 143.39, 142.96, 142.59, 141.60, 141.53, 140.35, 131.71, 131.52, 131.39, 128.57, 127.99, 127.95, 127.81, 127.27, 126.96, 126.85, 126.27, 110.49, 53.22, 18.42 ppm.
HRMS (DCTB, M+) calcd for C74H56N2O2+ 1004.43368; found 1004.43363.
The mixture was poured in 1 M aqueous HCl and extracted into dichloromethane. The organic layer was first washed with water, then dried over anhydrous MgSO4 and the solvent was removed under reduced pressure. The crude was purified by silica gel column chromatography with a mixture of petroleum ether/dichloromethane (2:3) as the eluent, affording 120 mg (21% yield) of 5RR as a dark reddish powder.
Similarly, 5SS was obtained from (S)-1-phenylethanol following the same procedure.
1H NMR (300 MHz, CDCl3) δ = 7.88 (d, J = 4.1 Hz, 2H), 7.38–7.27 (m, 10H), 7.10 (d, J = 4.1 Hz, 2H), 5.73 (q, J = 7.2 Hz, 2H), 1.96 (d, J = 7.1 Hz, 6H) ppm.
13C NMR (76 MHz, CDCl3) δ = 161.74, 140.68, 140.16, 134.44, 131.42, 130.58, 128.81, 127.55, 126.51, 119.29, 109.84, 53.58, 18.39 ppm.
HRMS (DCTB, M+) calcd for C30H22N2O2S2Br2+ 663.94910; found 663.94840.
Similarly, 6SS was obtained from 6SS following the same procedure.
1H NMR (499 MHz, CDCl3) δ = 8.06 (d, J = 4.0 Hz, 2H), 7.41–7.31 (m, 8H), 7.30–7.19 (m, 10H), 7.10–7.06 (m, 6H), 7.04 (d, J = 4.0 Hz, 2H), 7.03–7.00 (m, 4H), 6.98–6.92 (m, 6H), 6.89–6.85 (m, 4H), 6.68 (s, 2H), 5.61 (q, J = 6.8 Hz, 2H), 1.82 (d, J = 7.1 Hz, 6H).
13C NMR (125 MHz, CDCl3) δ = 161.90, 149.05, 144.18, 141.79, 140.92, 140.76, 139.65, 137.17, 134.74, 132.61, 131.85, 131.29, 130.80, 130.13, 129.31, 129.00, 128.71, 128.49, 128.45, 128.19, 127.90, 127.86, 127.12, 127.05, 126.57, 109.40, 53.64, 18.11 ppm.
HRMS (DCTB, M+) calcd for C70H52N2O2S2+ 1016.34529; found 1016.34647.
1H NMR (499 MHz, CDCl3) δ = 7.50 (d, J = 8.5 Hz, 4H), 7.29–7.22 (m, 4H), 7.14–6.98 (m, 40H), 4.90 (s, 4H) ppm.
13C NMR (125 MHz, CDCl3) δ = 162.92, 148.52, 147.21, 143.44, 143.43, 143.12, 142.69, 140.20, 137.65, 131.86, 131.55, 131.48, 131.41, 128.84, 128.57, 128.03, 127.99, 127.82, 127.47, 127.03, 126.88, 126.86, 125.97, 109.73, 45.79 ppm.
HRMS (DCTB, M+) calcd for C72H52N2O2+ 976.40259; found 976.40233.
Footnote |
† Electronic supplementary information (ESI) available. CCDC 2237602 and 2237603. For ESI and crystallographic data in CIF or other electronic format see DOI: https://doi.org/10.1039/d3tc00308f |
This journal is © The Royal Society of Chemistry 2023 |